Where is the MG HS engine manufactured?

1 Answers
MacCarson
07/24/25 10:46pm
The MG HS engine is developed by SAIC Motor and produced in SAIC's engine factory. The MG HS is a compact SUV, equipped with a single engine option across the entire lineup—a 1.5-liter turbocharged engine. This engine delivers a maximum power of 124 kW and a peak torque of 275 Nm. The MG HS has body dimensions of 4574 mm in length, 1876 mm in width, and 1664 mm in height, with a wheelbase of 2720 mm. It features an audio system with 8 speakers and 1 subwoofer, along with a 1.19 square meter panoramic sunroof that can open up to an area of 0.51 square meters.
Was this review help?
8
4
Share
More Forum Discussions

Analysis of Mercedes-Benz 8-Speed Dual-Clutch Transmission

Analysis of Mercedes-Benz 8-speed dual-clutch transmission is as follows: Transmission shift speed: The 8G-DCT first gear requires three gear engagements and two synchronizer engagements. The efficiency of a single gear engagement in 8G-DCT first gear is 98%, resulting in higher shift efficiency. Transmission acceleration time: With AMG Performance 4MATIC all-wheel drive, the 8G transmission achieves 0-100 km/h acceleration in just 5.2 seconds. Engine matched with transmission: The equipped 1.3T engine delivers maximum power of 163 horsepower and peak torque of 250 Nm, paired with the 8-speed dual-clutch transmission and four-wheel drive system, providing certain off-road capabilities.
18
3
Share

Is the Volkswagen Polo a joint venture car or a domestic car?

Volkswagen Polo is a joint venture car. Volkswagen joint venture cars: The joint venture car brands include Lavida, Bora, Magotan, Tayron, Passat, Sagitar, Golf, Tiguan, Tharu, Teramont, T-ROC Tango, Volkswagen Polo, Lamando, Santana, Viloran, Volkswagen CC, Tiguan, T-Cross, Phideon, Passat New Energy, etc. Brands under Volkswagen: Volkswagen has many automobile brands under its umbrella. With the development of automobile production technology, Volkswagen has become an automobile group, gathering multiple brands including Porsche, Lamborghini, Audi, Bugatti, Bentley, Skoda, Scania, MAN, SEAT, Ducati, etc.
7
2
Share

Is the Sylphy a Domestic or Joint Venture Car?

The Sylphy is a joint venture car, a compact sedan with a wheelbase of 2712 mm, and dimensions of 4641 mm in length, 1815 mm in width, and 1450 mm in height. The Sylphy features a MacPherson independent front suspension and a torsion beam rear suspension, which helps to maximize rear passenger space and trunk capacity. Its 1.6-liter naturally aspirated engine delivers a maximum power of 99 kW and a peak torque of 159 Nm, with the maximum power achieved at 6300 rpm and the peak torque at 4000 rpm. This engine is equipped with multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a CVT transmission.
14
4
Share

How many kilometers should the transmission fluid of the 2015 Regal be replaced?

The transmission fluid of the 2015 Regal should be replaced approximately every 40,000 kilometers to prevent internal oil passage blockage. Transmission fluid is primarily used to maintain the cleanliness of the gear system, providing lubrication and extending the lifespan of the vehicle's transmission components. The replacement interval for transmission fluid is longer compared to other fluids. Some vehicle models are equipped with maintenance-free transmissions, which do not require regular replacement unless leakage occurs. The 2015 Regal is a vehicle launched by SAIC-GM Buick, with body dimensions of 4902mm in length, 1863mm in width, and 1456mm in height, and a wheelbase of 2829mm.
12
3
Share

What is the fuel consumption of the G-Class?

Mercedes-Benz G-Class has an official combined fuel consumption of approximately 11.8L/100km. Below is relevant information about fuel consumption: Definition of fuel consumption: Fuel consumption refers to the vehicle's fuel consumption per 100 kilometers obtained in constant-speed fuel consumption tests specified by national standards for certain types of vehicles. Testing of fuel consumption: The test can be conducted on roads or on chassis dynamometers, and the fuel consumption per 100 kilometers is then calculated using the "flowmeter method" or "carbon balance method". The fuel consumption test method for passenger cars adopts speeds of 90km/h and 120km/h; for commercial vehicles, the test starts at 20km/h, with speeds selected in integer multiples of 10km/h up to 90% of the maximum speed, and at least 5 test speeds are measured.
15
0
Share

Where is the fuel pressure sensor located on the Passat?

The fuel pressure sensor on the Passat is located in the fuel inlet line leading to the two high-pressure fuel pumps. Function of the fuel pressure sensor: The fuel pressure sensor, also known as the fuel pressure regulator, is used to control the fuel pressure in the fuel line, maintain a constant fuel supply pressure to the injectors, and return excess fuel to the fuel tank. Components of the fuel pressure sensor: The fuel pressure sensor consists of a printed circuit board, sensor element, spacer block, and housing, among other components. Inside, there is a pressure chamber containing a diaphragm with an overflow valve. The inner side of the diaphragm is a vacuum chamber, which also contains a spring.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.