Where is the MG 6 interior trunk switch located?

2 Answers
SanBrantley
07/24/25 3:56am
The MG 6 interior trunk switch is located above the license plate. Gently push up the center of the license plate with a little force to open it. The trunk capacity of the MG 6 is 499 liters, which can expand to 1,383 liters when the rear seats are folded down. The exterior and interior of the MG 6 are designed with a sporty direction, featuring an inverted trapezoidal mesh grille connected to sleek and sharp headlights on both sides. The front lines are clean and cohesive, while the side profile adopts a fastback design, with smooth rooflines and sharp waistlines that exude a sporty feel. The dual-tone interior, 10.1-inch central touchscreen, and turbine-style air vents highlight the car's premium appeal. In terms of power, the MG 6 is equipped with a 1.5T turbocharged engine, delivering a maximum power of 124 kW and a peak torque of 250 Nm, paired with either a 6-speed manual or 7-speed dual-clutch transmission.
Was this review help?
1
1
Share
JakeLynn
08/10/25 11:33pm
I just bought an MG 6 and did some research. The trunk release button inside the car is located on the inner side of the driver's door panel, not far from the door handle. It's a small button that your right hand can easily reach when seated, which is quite user-friendly in design and simple to operate without needing extra tools. In some versions, the switch might be on the floor near the left foot, slightly lower and easily overlooked. Like me, I was frustrated for a while when I couldn't find it at first, only to realize later that I just needed to bend down to see it. If there's no button function, it might be a high-end version controlled by the central screen—just a tap on the screen does the trick. The remote key also has a trunk unlock button; pressing it twice automatically pops open the trunk, making it super convenient for loading and unloading items. As a backup, there's an emergency pull cord or manual switch inside the trunk lid to prevent being unable to open it when the battery is dead. Developing a habit of regularly checking these switches can save a lot of trouble and avoid last-minute panic after parking.
Was this review help?
4
5
Share
Expand All
More Forum Discussions

Is Engine Lubricant Necessary?

Engine lubricant is necessary. It serves functions such as lubrication, cleaning, cooling, and rust prevention. If an engine lacks lubrication, friction components can easily seize, causing irreversible damage to the engine. The function of an engine is to convert the thermal energy of gasoline or diesel into mechanical energy by burning the fuel in a sealed cylinder, which expands the gas and drives the piston to perform work. Methods for maintaining an engine include: 1. Using qualified engine oil; 2. Using qualified coolant and antifreeze; 3. Regularly cleaning scale from the radiator; 4. Regularly removing carbon deposits from the engine; 5. Regularly replacing the three filters in the car; 6. Maintaining a reasonable engine speed.
3
5
Share

Is pressing the clutch pedal the same as being in neutral?

Pressing the clutch pedal is not the same as being in neutral. The working principle of the clutch is: 1. When the inner race is fixed, the outer race can rotate freely in the clockwise direction as the wedges do not lock; 2. When the outer race rotates counterclockwise, the wedges lock, preventing the outer race from rotating. The main functions of the clutch are: 1. Gradually increasing the driving force to allow the car to start smoothly; 2. Temporarily separating the engine and transmission for gear shifting; 3. Preventing overload of the transmission system; 4. Reducing torsional vibration impacts from the engine and extending the lifespan of transmission gears. Severe clutch wear can lead to: 1. Car slippage and insufficient power; 2. Difficulty starting the car or ignition problems; 3. Poor climbing performance and increased fuel consumption.
14
0
Share

What are the methods for summer tire maintenance?

Summer tire maintenance methods include: 1. Regularly clean stones from tire treads; 2. Avoid exposing tires to direct sunlight; 3. Frequently check tire pressure by referring to the normal tire pressure values indicated on the inside of the vehicle's fuel tank cap and adjust accordingly; 4. Pay attention to suspension maintenance; 5. Regularly inspect front wheel alignment; 6. Choose smooth road surfaces while driving, avoid objects that can puncture or scratch tires, and steer clear of chemical spills that may corrode tires. The functions of tires are to support the entire weight of the vehicle, transmit traction and braking torque, prevent vibration and damage to vehicle components, and ensure driving safety.
17
0
Share

Does Wuling Hongguang have SUV models?

Wuling Hongguang has SUV models. SUVs belong to the category of sports utility vehicles. The models under Wuling Hongguang include: Wuling Hongguang S, Wuling Hongguang V, Wuling Hongguang Plus, Wuling Hongguang S3, Wuling Hongguang Mini, etc. Taking the 2019 Wuling Hongguang S3 as an example, it is a mid-size SUV with body dimensions of: length 4655mm, width 1735mm, height 1790mm, and a wheelbase of 2800mm. The 2019 Wuling Hongguang S3 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 147PS, maximum power of 108kW, maximum torque of 250Nm, and is paired with a 6-speed manual transmission.
13
4
Share

What to Do If Car Tire Pressure Is Too High?

To address high tire pressure in a car: Simply press the air release valve while monitoring the numbers on the tire pressure gauge to maintain normal pressure. The hazards of high tire pressure include: 1. Reduced tire friction and adhesion, affecting braking performance and tire lifespan; 2. Decreased puncture resistance, increasing the risk of blowouts; 3. Accelerated wear on the central tread pattern, shortening tire life, increasing vehicle vibration, and affecting the lifespan of other components; 4. Excessive stretching of tire cords, reducing tire elasticity, increasing the load on the car while driving, and lowering puncture resistance; 5. Increased susceptibility to punctures from nails, glass, or other sharp objects on the road, leading to internal cracks, bursts, and blowouts upon impact.
2
3
Share

How many types of crankshaft position sensors are there?

Crankshaft position sensors come in 3 types: magneto-inductive, Hall effect, and photoelectric. The working principle of the crankshaft position sensor is: 1. The crankshaft position sensor is installed on the flywheel, using pulse signals to sense the crankshaft position, determining the engine speed and the relative position of the pistons when the crankshaft rotates; 2. The engine control unit uses the information provided by the crankshaft position sensor to generate ignition signals and injection pulses, which are sent to the ignition coil and fuel injector respectively. The functions of the crankshaft position sensor are: 1. Determining the crankshaft's angle and the engine's speed; 2. The crankshaft position sensor works together with the camshaft position sensor to determine the engine's ignition timing.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.