Where is the Mercedes-Benz wiper switch located?

2 Answers
MacAlyssa
07/24/25 8:10pm
The wiper switch of Mercedes-Benz vehicles is located on the left side of the steering wheel, combined with the light control on a single lever. Mercedes-Benz wipers' automatic intermittent working mode can adjust the swinging frequency, allowing the wiper's movement to vary based on vehicle speed. When the wiper lever is set to the automatic intermittent mode, the wiper will change its swinging frequency according to the adjusted setting and the vehicle's speed. Wipers are also known as windshield wipers or windscreen wipers, and they are devices used to remove raindrops and dust from the vehicle's windshield, improving the driver's visibility and enhancing driving safety. Precautions for using wipers: Check whether the upper and lower wipers swing in sync; if not, correct them promptly. If the wiper makes a heavy "squeaking" sound while working, there might be an issue with its adjustment or excessive downward pressure. If some moisture remains on the windshield after several wipes, it indicates that the rubber blade is aged and needs replacement. Never operate the wipers dry, as this can damage them and potentially scratch the windshield if sand or other debris is present. Regularly lubricate the wiper joints to reduce mechanical friction. Remove debris promptly; if leaves or other debris accumulate on the windshield after parking, avoid using the wipers directly to clear them. Avoid forcibly peeling off frozen wipers or pouring hot water, as this may cause the wiper blade to tear or the windshield to crack. Instead, start the vehicle, turn on the heater, and direct warm air toward the windshield to thaw the wipers. Additionally, when choosing windshield washer fluid in winter, opt for an antifreeze type based on local temperatures. In colder northern regions, choose a specialized antifreeze washer fluid that remains effective even at -40°C.
Was this review help?
16
3
Share
DiViolet
08/11/25 11:00am
I've been driving a Mercedes-Benz for many years. The wiper switch is installed on the long lever on the right side of the steering wheel, and a gentle push can activate it. Pushing it upward is the intermittent mode for a single wipe, while pushing it downward is the continuous mode, suitable for heavy rain. There's also a rotary knob at the top of the lever that can be turned to adjust the speed. Mercedes' design is really user-friendly, especially during heavy rain when clear visibility is crucial. It's also important to regularly check the wiper blades and electrical circuits to avoid aging and jamming. I remember once during heavy rain, manually increasing the speed helped maintain a safe field of vision. I recommend beginners practice these operational tips more often. For maintenance, cleaning the wiper groove dust every quarter can extend its service life.
Was this review help?
19
5
Share
Expand All
More Forum Discussions

Does idling with the air conditioning on damage the car?

Idling with the air conditioning on can damage the car. There are three main reasons why idling with the air conditioning on is harmful: 1. Idling with the air conditioning on can cause incomplete combustion in the engine, increasing carbon deposits inside the engine. If the air conditioning is left on while idling for extended periods, carbon monoxide poisoning may occur inside the car, which is harmful to both the vehicle and the occupants; 2. When the car is idling (stationary without pressing the accelerator), the fuel reacts with oxygen in the air but does not burn completely, producing more exhaust gases containing carbon monoxide; 3. Carbon monoxide can accumulate around the car, and the longer the duration, the higher the concentration. If the car is set to external air circulation, a significant amount of carbon monoxide from outside can be drawn into the car, leading to carbon monoxide poisoning.
20
5
Share

What does BCM mean in cars?

BCM in cars stands for Body Control Module, whose main function is to achieve discrete control functions and manage various electrical appliances. It primarily controls automotive body electrical components such as lights, wipers, door locks, power windows, sunroofs, etc. Here is a brief introduction about BCM: 1. The functions of the Body Control Module include: power window and door control, central door locking control, remote anti-theft, lighting system control, heated electric mirror control, instrument backlight adjustment, power distribution, etc. 2. The Body Control Module (BCM) coordinates different functions within the vehicle through signals. They manage numerous vehicle functions including door locks, alarm sound control, interior and exterior lighting, safety features, wipers, turn indicators, and power management. BCMs integrated into the vehicle's electronic architecture provide maximum reliability and cost-effectiveness while reducing the number of required plug connections and cable harnesses.
17
3
Share

What is the function of DSC in sedans?

Here are the functions of DSC in sedans: 1. DSC stands for Dynamic-Stability-Control, which is a dynamic stability control system, similar to what is commonly referred to as ESP. 2. DSC is an extension of traction control or anti-slip regulation, ensuring that the vehicle maintains optimal traction during turns to guarantee driving stability. 3. The DSC system is equipped with more advanced detection and control features to ensure good traction during turns, including the ability to detect wheel speed, steering wheel rotation angle, vehicle speed, and lateral acceleration of the vehicle.
6
1
Share

What Causes the Ticking Sound When the Car Just Starts?

Here are the reasons for the ticking sound when the car just starts: 1. When checking under the hood while the car is idling, you might suspect an abnormal noise from the engine. If you can't hear this sound inside the car, it's usually not significant and is likely from the valves or fuel injectors. The carbon canister solenoid valve can also produce this sound, but it tends to be sharper. 2. Most cars will have a slightly louder engine sound during cold starts compared to when the engine is warm. As long as the sound is even and smooth, not harsh, it's generally not a problem. This is because, during a cold start, the gap between the cylinder wall and piston hasn't reached its optimal size, and the oil lubrication isn't fully effective yet. Typically, when the engine block temperature reaches around 95 degrees, the sound will normalize. 3. Oil-related issues. Using low-quality oil, not changing the oil for a long time, or low oil levels can increase friction between the valves and guides, as well as in components like hydraulic lifters, making various engine sounds louder. 4. If you're still concerned after the above checks, it's recommended to visit the nearest 4S shop or auto repair shop for a professional inspection to confirm the cause of the issue.
13
4
Share

How Long Do Built-in Tire Pressure Monitoring Systems Last?

Built-in tire pressure monitoring system batteries typically last 2-3 years, but the lifespan varies depending on the brand of the monitoring system and the type of battery used. A built-in tire pressure monitoring system involves installing the sensor between the tire and the wheel rim, replacing the original valve stem. Therefore, professional installation at a tire shop is required, and wheel balancing must be performed. The advantages include: high accuracy in tire pressure readings, theft and loss prevention, no need to remove the sensor when inflating tires, and a one-time installation for long-term use. More details are as follows: 1. Tire pressure monitoring systems automatically and continuously monitor tire pressure while driving, alerting the driver to leaks or low pressure to ensure driving safety. When tire pressure is too high, the contact area between the tire and the ground decreases, increasing the pressure on the tire and reducing traction. 2. Additionally, when driving over bumps or uneven surfaces, insufficient space inside the tire to absorb vibrations not only affects driving stability and ride comfort but also increases the impact on the suspension system, leading to potential damage. Moreover, the risk of tire blowouts in high temperatures also rises accordingly.
2
3
Share

What does it mean when the engine malfunction indicator light comes on?

The engine malfunction indicator light may come on due to the following 7 main reasons: Sensor malfunction: The sensors mentioned here include coolant temperature, crankshaft position, air flow, intake air temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot accurately obtain engine data, which will trigger the engine malfunction light. Fuel quality issues: If fuel and engine oil are not added according to the manufacturer's requirements, it may cause engine wear and trigger the malfunction light. Poor fuel mixture combustion: Poor combustion can lead to engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the malfunction light will illuminate as a warning. Spark plug failure, ignition coil failure, fuel pump failure, and fuel line blockage can all cause poor fuel mixture combustion. Turbocharging issues: The intake turbocharging pipeline and turbocharger can also cause the engine malfunction light to come on. The most common issue is turbocharger damage, accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, and blue or black smoke from the exhaust. Intake issues: If there is a problem with the vehicle's intake, it may cause engine pipeline blockage, and in severe cases, trigger the engine malfunction light. A dirty air filter that is not cleaned regularly can lead to intake problems. Exhaust issues: Exhaust faults can also cause the engine malfunction light to illuminate. Common causes include rear oxygen sensor failure, three-way catalytic converter failure, exhaust camshaft and bearing failure, with the three-way catalytic converter being the most frequent issue. Using leaded gasoline, lead or silicon-based lubricant additives, physical damage to the catalytic converter, or fuel system faults can easily cause three-way catalytic converter failure. Anti-theft system malfunction: If the vehicle's electronic anti-theft system malfunctions or the anti-theft controller does not match the engine electronic controller, the anti-theft system can prevent the engine from operating normally and trigger the malfunction light. If the engine malfunction light comes on, follow these steps: First, check if the engine is running normally and whether there are issues such as shaking or black smoke. If so, avoid restarting the engine. Note: Do not restart the engine if the red warning light is on. If the engine can be started, turn it off and wait 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the 'on' position without depressing the clutch. The vehicle will perform a self-check after powering on. Observe whether the malfunction light turns off after 5-10 seconds. If the light remains on, visit a service center as soon as possible. The service center can use a portable diagnostic tool to read the fault code, identify the issue, and perform targeted repairs.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.