Where is the Mercedes-Benz Screen Control Switch Located?

3 Answers
StAvery
08/27/25 4:17am
Mercedes-Benz Screen Control Switch Located on the Central Control Panel The central control screen switch of a Mercedes-Benz is located on the central control panel. The central control screen is an LCD display positioned in the middle of the dashboard, capable of showing basic information such as time, temperature, date, and audio. It typically serves as the information display device for the multimedia control system, electronic navigation system, and rearview assist system. Mercedes-Benz models include the Mercedes-Benz GLS, GLE, GLC, GLA, CLA, among others. Taking the 2021 Mercedes-Benz GLS as an example, it is a mid-to-large-sized vehicle with body dimensions of 4988mm in length, 1890mm in width, 1424mm in height, and a wheelbase of 2939mm.
Was this review help?
8
2
Share
StCollin
09/09/25 3:24am
As a seasoned Mercedes driver with over a decade of experience, I remember clearly that in the E-Class, the infotainment screen's power switch was typically controlled by the rotary knob on the center console, located between the front seats. Back then, it was the COMAND system – a gentle press of the knob would turn the screen on or off, which was quite convenient and minimized distractions while driving. However, newer models might have switched to the MBUX system with more intelligent operation methods. In my older car, if the screen didn't light up, it was often due to poor contact in the rotary knob or a blown fuse, requiring a visit to the repair shop. I recommend regular maintenance of control components rather than waiting for a malfunction. Safe driving should always be the top priority. After all, Mercedes designs emphasize ergonomics, with button placements carefully considered for daily comfort, though there might be slight variations between models. Consulting your car's manual is always the safest approach.
Was this review help?
13
3
Share
Expand All
OQuinn
10/23/25 4:13am
When I first got my hands on the Mercedes-Benz C-Class MBUX system, I was pretty excited. The central control screen doesn't have a physical power button—it's basically always on. Located in the dashboard's central control area right in front of the steering wheel, it activates automatically when you enter the car and responds to a light touch. In daily use, I found the wake-up method super simple—just touch it. If you really need to turn off the display, you can adjust the sleep timer in the system settings or use a combination of multifunction buttons on the steering wheel. This design minimizes physical buttons, allowing for better focus while driving. But beginners should avoid unnecessary tinkering—the screen brightness adjusts automatically, so manual on/off is rarely needed. If the system freezes, restarting the engine usually resolves most issues, and regular software updates help enhance the overall experience.
Was this review help?
5
5
Share
Expand All
More Forum Discussions

How to adjust the audio effects of BYD F3?

BYD F3 audio effect adjustment method: 1. In the current audio system off mode, press the knob again, and the system will return to the audio system interface before the off mode; 2. Rotate the knob, and a volume control bar will appear at the bottom of the interface, which can be used to adjust the volume; 3. Press and hold the knob, and the system will automatically restart. The BYD F3 is an A+ class passenger car produced by BYD Auto, with body dimensions of 4533 mm in length, 1705 mm in width, and 1490 mm in height. The interior design of the BYD F3 is simple and elegant, with a fresh light-colored interior. It is fully equipped, and high-end models are equipped with leather seats and a reversing radar.
10
1
Share

What is the real fuel consumption of the 1.5T Envision?

The real fuel consumption of the 1.5T Envision is around 9.5 liters per 100 kilometers. Here is some information about fuel consumption: 1. Introduction: Generally, it refers to the amount of gasoline consumed by a vehicle over 100 kilometers, which is a theoretical indicator for the vehicle. 2. Ways to reduce fuel consumption: The longer the idling time when parked, the greater the fuel consumption, so try to minimize idling time; avoid rapid acceleration, slamming on the throttle, and driving at lower engine speeds. 3. Factors affecting fuel consumption: Various working conditions such as acceleration, deceleration, braking, and engine idling, as well as load capacity, temperature, and whether the air conditioning is on, all have an impact.
4
0
Share

What to Do When the White Car Paint Gets Scratched?

If the white car paint is scratched without damaging the primer, it can be repaired using toothpaste and a touch-up pen. If the primer is damaged, repainting is required. Below are specific tips for handling scratches: 1. Touch-up Pen: Use a touch-up pen for coloring. Although the effect is not as good as professional repair at a beauty shop, it can prevent rust from spreading and worsening for small or inconspicuous scratches. 2. Apply Toothpaste: When you notice new small scratches on the car body, gently apply toothpaste in a circular motion over the scratch. Reapply after rain or washing the car. This generally helps reduce the scratch marks and provides a simple barrier to prevent rust, which is effective in the short term. 3. Waxing: Very minor damage can be removed with regular maintenance wax. For heavier scratches, use a wax commonly known as "sand wax," which has stronger polishing properties. Before waxing, make sure to wash the car thoroughly to remove any dust or debris. Be careful not to use too much wax; just enough to cover the damaged area is sufficient.
13
0
Share

What Are the Effects of Driving with the Handbrake On?

Driving with the handbrake engaged can lead to accelerated wear of the brake discs and hardening of the brake pads, resulting in reduced braking performance. In severe cases, it may even cause smoke to emerge from the rear of the vehicle. Additionally, it could result in the brake calipers seizing, brake fluid leakage, or excessively high brake fluid temperatures, potentially leading to a complete loss of braking function. Below are some related points: 1. Emergency Measures: If you realize you're driving with the handbrake on and notice a strong burning smell or smoke from the rear, immediately slow down by braking and release the handbrake. 2. Correct Approach: Develop proper driving habits by always checking if the handbrake is disengaged before driving and regularly monitoring the dashboard for any warning lights or alerts.
18
0
Share

How to Deal with Car Scratches Using Toothpaste?

Toothpaste can be used to deal with car scratches by evenly applying it on a cloth and gently rubbing the scratched area. Here are some specific tips for handling scratches: 1. Touch-up Pen: Use a touch-up pen to color the scratched area. While this method may not be as effective as professional treatment at a beauty shop, it can help prevent rust from spreading or worsening, especially for small or inconspicuous scratches. 2. Apply Toothpaste: When you notice new small scratches on the car body, gently apply toothpaste in circular motions on the scratched area. Reapply after rain or washing the car. This can generally reduce the visibility of the scratch and act as a simple barrier to prevent rust, providing a short-term solution. 3. Waxing: Very minor damage can be removed with regular maintenance wax. For more severe scratches, use a wax commonly known as "polishing wax," which has stronger polishing properties. Before waxing, make sure to wash the car thoroughly to remove any dust or debris. Be cautious not to use too much wax; just enough to cover the damaged area is sufficient.
1
2
Share

How to Detect if a Car is Installed with GPS?

Detecting whether a car is installed with GPS can be directly done using a GPS signal detector. Vehicle positioning devices are mainly divided into three types: wired type, OBD interface type, and strong magnetic type (no installation required). For wired GPS: One method is to manually inspect without any equipment, as wired GPS needs to be connected to a power source to function. Therefore, you can slowly trace along the car's power lines to search. Another method is to use a GPS signal detector to search, as wired GPS sends the current GPS location to the server every few seconds to tens of seconds. Find an open area with no people within 20 meters, hold the handheld signal detector, adjust the sensitivity, and slowly scan from the inside to the outside of the car to see if any signal can be detected. If a signal is found, move around to determine the signal strength. When the signal is at full strength, the GPS is near the detector, and you can confirm whether the car is installed with GPS. For wireless GPS: If the car is installed with a wireless GPS tracker (which does not require power and is usually attached with magnets), you can also manually inspect areas such as the front and rear bumpers, inside the trunk, glove compartment, under the passenger seat, side compartment, or door compartment, and even the chassis (requires a waterproof bag). If manual inspection fails, you need to use a professional GPS positioning system to detect it, as these GPS trackers are set to transmit signals at fixed intervals or times, remaining dormant otherwise. During dormancy, no tools can detect them.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.