Where is the Mercedes-Benz ACC fuse located?

Does CVT Power Flush Damage the Transmission?

CVT power flush does not damage the transmission. The procedure for changing transmission fluid using a power flush machine is as follows: 1. Remove the undercover and loosen the drain plug; 2. Drain the old fluid through the drain plug hole and by removing the oil pan; 3. Expose the automatic transmission and remove the oil pan; 4. Clean the oil pan with a degreaser; 5. Reinstall the oil pan and refill with transmission fluid; 6. Open the transmission's drain and fill ports, then connect the power flush machine's inlet and outlet hoses to the transmission. The purpose of changing transmission fluid is to maintain a clean shifting system and provide lubrication to prolong the life of the transmission components. Signs that indicate the need for transmission fluid change include: 1. Vehicle vibration or rough shifting; 2. Transmission overheating warning on the dashboard; 3. Engine stalling; 4. Unusual noises.

18

5

Share

What type of car is momo?

momo is a car modification brand, most famous for its steering wheel modifications. The correct way to hold a steering wheel is: 1. Place both hands firmly at the 9 o'clock and 3 o'clock positions on the steering wheel; 2. Grip naturally with fingers curled inward and thumbs extended along the edge. Steering wheels can be categorized into single-spoke, double-spoke, three-spoke, and four-spoke designs, and their function is to convert the force applied by the driver at the wheel's edge into torque, which is then transmitted to the steering shaft. Important precautions for using a steering wheel include: 1. Avoid excessive force when turning; do not jerk the wheel or turn it when the vehicle is stationary; 2. On rough roads, hold the wheel firmly to prevent loss of control and potential accidents; 3. Reduce speed before turning; 4. Gradually turn the wheel according to the curve's radius when entering a bend.

13

5

Share

How to correctly enter the left-turn lane on a motorcycle?

The Road Traffic Law stipulates that motor vehicles making a left turn must enter the fast lane 50 meters in advance. Motorcycles are also classified as motor vehicles, so when making a left turn on a motorcycle, you need to enter the fast lane 50 meters in advance. However, in certain cities with specific traffic regulations, motorcycles should use the right-turn lane and then enter the designated motorcycle waiting area at the traffic signal. Additional information: 1. Roads are divided into motor vehicle lanes, non-motor vehicle lanes, and pedestrian walkways; vehicles are classified as motor vehicles and non-motor vehicles. 2. The superior law, based on the safety management characteristics of vehicles with different speeds, clearly states that vehicles should travel in separate lanes, defines motorcycles as motor vehicles, and specifies that motorcycles should travel in the rightmost motor vehicle lane. Local traffic regulations establishing "two-wheeled vehicle lanes" contradict the legislative principle of "facilitating traffic safety management."

8

3

Share

What is the fuel tank capacity of the Beetle in liters?

The fuel tank capacity of the Beetle is 55 liters, as officially announced. The recommended fuel grade for the Beetle is 95, with a fuel consumption of 5.6-9.5L per 100 kilometers. A full tank can cover a distance of 579-982km. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safe fill level, and there is additional space from the safe fill level to the tank opening. This space is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is added up to the tank opening during refueling, the actual amount of fuel may exceed the marked tank capacity.

20

0

Share

Where is the engine number located on a Leopaard engine?

The engine number of a Leopaard vehicle is printed on the front of the engine block. In addition to the above method, the engine number can also be viewed through the following 4 ways: The vehicle's driving license bears the engine number, usually located on the second-to-last line; The motor vehicle registration certificate will indicate the engine number; The car purchase invoice will state the engine number; The vehicle purchase tax payment certificate will indicate the engine number. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's range, and engine models can be the same. The engine number refers to the production number of the engine, where each engine can only have one unique engine number, and every engine's number is different.

15

5

Share

What causes the jerky feeling of insufficient fuel supply in a car?

Reasons for jerky acceleration and fuel cut-off are as follows: 1. Engine power supply system: Spark plugs and ignition coils. If the high-voltage spark is weak, it can cause intermittent engine malfunction. 2. Engine fuel supply system: Fuel injectors. If the injectors have carbon deposits, slight blockages, or poor atomization, it can easily lead to abnormal fuel injection. 3. Valve body damage: Transmission issues such as jerking, hesitation, or gear hunting are usually caused by a damaged valve body or dirty transmission fluid with internal impurities. Especially when dirt and impurities accumulate inside the valve body, blocking the passages, it prevents effective regulation of oil pressure, leading to jerking, slipping, and other problems. 4. Damaged engine mounts: If the transmission mount is damaged, it fails to provide cushioning when releasing the throttle, resulting in jerking. 5. Excessive carbon buildup: If the throttle body is not cleaned for a long time, excessive carbon deposits can alter the throttle opening angle, causing jerking when releasing the throttle.

8

2

Share

Where is the Mercedes-Benz ACC fuse located?

Does CVT Power Flush Damage the Transmission?

What type of car is momo?

How to correctly enter the left-turn lane on a motorcycle?

What is the fuel tank capacity of the Beetle in liters?

Where is the engine number located on a Leopaard engine?

What causes the jerky feeling of insufficient fuel supply in a car?

How many kilograms is 60 liters of gasoline equal to?

Where is the automatic folding switch for the Audi A6 rearview mirror?

Is the BMW 535le Hybrid's Failure Rate High?

How often should the belt on a BMW 530LE be replaced?