···
Log in / Register

Where is the memory card slot for the Cadillac XT6 dash cam?

4 Answers
VonFelix
08/30/25 8:29am
xt6 dash cam memory card slot is located on the upper side of the device body. Below is additional information: 1. Memory card malfunction: Since dash cams require continuous data reading/writing and are often exposed to direct sunlight, memory cards operating in high-temperature environments face quality challenges. Using low-quality memory cards makes them prone to burnout. 2. Dash cam battery damage: Typically, dash cams have built-in batteries. When these batteries operate long-term in high-temperature conditions, they're more susceptible to swelling. Therefore, if the dash cam has been used for 1-2 years, failure to detect the memory card may indicate battery damage requiring replacement.
Was this review help?
6
2
Share
SabrinaMarie
09/12/25 5:21am
The SD card slot for the Cadillac XT6's dash cam is mostly located at the base of the interior rearview mirror, near the windshield end. This location is designed to be discreet and not obstruct the driver's view. Upon closer inspection, there's a small cover or card slot opening behind the rearview mirror—just gently push to reveal the SD card slot. If the vehicle is equipped with a factory-installed dash cam, this position is almost standardized. It's recommended to use a Class 10 high-speed SD card with a capacity not exceeding 32GB to ensure smooth video recording and data storage. Some versions might hide the slot in the glove compartment—check the side of the opened glove box for a memory card slot. Develop a habit of regularly checking if the card is securely inserted while driving to avoid interrupted recordings that could compromise accident evidence. If still uncertain about the location, refer to the vehicle's user manual, which usually includes detailed illustrations. If all else fails, consult a 4S dealership or professional technician.
Was this review help?
16
2
Share
Expand All
LouisLynn
10/26/25 6:09am
I've noticed many Cadillac XT6 owners complain about not finding the card slot. Actually, it's a bit tricky near the rearview mirror. Last time while driving, I accidentally adjusted the mirror and spotted a small hidden panel underneath. Pushing it open revealed the SD card slot. The discreet design prevents driving distractions, but requires some tactile exploration to locate. It's advisable to carry a spare SD card—if the current one fills up, you can quickly swap it without interrupting recording. Also check the glove compartment, as some aftermarket dashcams might be installed there. Don't rely solely on app controls; regularly clean the physical slot to prevent dust-induced poor contact affecting footage. Stay observant—safety comes first when driving.
Was this review help?
10
3
Share
Expand All
KaydenAnn
12/09/25 6:29am
To check the memory card slot of the Cadillac XT6 dash cam, first examine the base area of the interior rearview mirror - there's usually a small cover there. Apply gentle pressure when pushing the cover to expose the SD card slot to avoid damage. For factory-installed devices, the location is fixed and easy to access. Some owners report finding slots in the glove compartment as well. When replacing cards, it's recommended to use reputable brand high-speed SD cards with 16-32GB capacity to ensure stable recording quality. Regular data backups prevent loss of critical footage. Knowing this location makes routine maintenance much simpler.
Was this review help?
12
4
Share
Expand All
More Forum Discussions

Is the Consequences of Mixing Engine Oil and Hydraulic Oil Serious?

Engine oil and hydraulic oil cannot be mixed because their viscosities are different, and mixing them can have serious consequences. Mixing engine oil and hydraulic oil will alter the viscosity and viscosity-temperature properties of the hydraulic oil, thereby affecting its performance. It can clog filters, prevent oil pressure from rising, and accelerate the aging of oil seals and rubber sealing rings in the hydraulic system. Engine oil is specifically designed for gasoline and diesel engines based on engine requirements, demanding high detergency and dispersancy among other performance characteristics. It contains several functional additives, including detergents and dispersants. Hydraulic oil is primarily used in various hydraulic systems. Its viscosity grade is determined by the operating conditions of the hydraulic system, and it contains additives such as anti-oxidants, rust inhibitors, and anti-wear agents, which are entirely different from those in engine oils. Typically, hydraulic oil lacks detergency and dispersancy, making it unsuitable for use as engine oil. However, to simplify the variety of oils used on-site, there are rare cases where engine oil (with suitable viscosity) is used as hydraulic oil. Yet, its performance indicators, such as emulsification and hydrolytic stability, do not meet the specifications required for hydraulic oil. Therefore, in underground, aquatic, or humid environments, engine oil must never be used as a substitute for hydraulic oil.
15
1
Share

What is the application process for the Zhejiang A license plate lottery?

1. Online application: Register and log in to the Hangzhou Passenger Vehicle Quota Regulation Management Information System to fill in the application information, set a password, and obtain an application code upon successful submission. 2. In-person application: For those unable to apply online or required to confirm in person, visit a service window to complete the application, obtain a code, and set a password. After successful application, you can log in to the Hangzhou Passenger Vehicle Quota Regulation Management Information System to check the status or visit the regulation service window with your ID to handle related matters. The required documents for individual applications are as follows: 1. Residency: Applicants must reside in the city, including: local residents with household registration; non-local residents holding a valid "Zhejiang Province Talent Residence Permit"; non-local residents holding a valid "Zhejiang Province Residence Permit" or "Zhejiang Province Temporary Residence Permit" with continuous social insurance payments (excluding back payments) in the city for the past two years; active-duty military personnel stationed in Hangzhou (including armed police forces); Hong Kong, Macau, Taiwan residents, overseas Chinese, and foreigners who have lived in the city continuously for over two years with valid ID and accumulated at least nine months of residence per year. 2. Driver's license: Hold a valid motor vehicle driver's license. 3. Eligibility: No valid quota under the applicant's name and no eligibility to apply for a renewal quota. 4. Quota: No overdue unused incremental quotas, county (city) quotas, or step quotas obtained through the lottery within the past two years.
11
3
Share

What are the rules for reducing penalty points through traffic law study?

According to Article 5 of the Notice issued by the Ministry of Public Security on January 14, 2020 (Gongjiao Guan [2020] No. 14), titled 'Regulations on Reducing Traffic Violation Points Through Traffic Safety Education (Trial)': Motor vehicle drivers who apply to participate in traffic safety education to reduce traffic violation points must attend corresponding road traffic safety laws, regulations, and related knowledge study sessions or exams, or participate in traffic safety public welfare activities based on their highest permitted vehicle type and meet relevant requirements to apply for point reduction. The point reduction through study is a measure for licensed drivers who have been penalized for traffic violations. After completing online traffic safety study and passing the exam, their penalty points can be reduced. This initiative is a public convenience measure uniformly deployed by the Traffic Management Bureau of the Ministry of Public Security. Specific considerations are as follows: Applicable Individuals: Motor vehicle drivers holding a People's Republic of China motor vehicle driver's license, regardless of the vehicle type permitted by the license or whether they are commercial vehicle drivers, can participate in the point reduction program. They must attend study sessions or exams on road traffic safety laws, regulations, and related knowledge according to their highest permitted vehicle type. Specific Rules: Motor vehicle drivers participating in online road traffic law and regulation study must complete a continuous 5-minute study session each time. Within 3 days, the cumulative study time must reach 30 minutes. Then, within 7 days, they can register for the exam. Upon passing the exam, 1 penalty point can be reduced. Drivers can also attend on-site study sessions, with each session lasting no less than 1 hour. After completing the required study hours, they can apply for the exam. Passing the exam will reduce 2 penalty points. Non-eligible Cases: The following situations will not be accepted: In the previous scoring cycle, the driver had two or more instances of full-point penalties. Within a 3-point cycle, the driver was involved in hit-and-run accidents, drunk driving, or the fabrication or alteration of documents or license plates. The motor vehicle driver's license is in the probationary period or has not been reviewed on time. The driver has unresolved traffic violation records under their name. The driver has a motor vehicle under their name that has not passed the safety technical inspection on time or has not been deregistered as required. The driver has already reduced the maximum of 6 penalty points in the current cycle.
2
1
Share

Does 'S' indicate provincial highways?

Provincial highway numbering adopts two to three digits (most provinces and cities use three digits), uniformly numbered at the provincial (municipal) level, represented by the letter 'S', where 'S' is the initial letter of the Chinese pinyin for 'province'. Since numbering is done by province or city, every province has an S101. In China, the numbering of roads at various levels is as follows: 1. Expressway numbering: Expressway numbering uses one to two digits, uniformly numbered nationwide, represented by the letter 'G', where 'G' is the initial letter of the Chinese pinyin for 'national-level roads' (expressways fall under the category of national highways). 2. National highway numbering: National highway numbering uses three digits, uniformly numbered nationwide, represented by the letter 'G', where 'G' is the initial letter of the Chinese pinyin for 'national-level roads'. 3. Provincial highway numbering: Provincial highway numbering adopts two to three digits (most provinces and cities use three digits), uniformly numbered at the provincial (municipal) level, represented by the letter 'S', where 'S' is the initial letter of the Chinese pinyin for 'province'. Since numbering is done by province or city, every province has an S101. 4. County road numbering: County road numbering adopts two to three digits (most counties and districts use three digits), uniformly numbered at the county (district) level, represented by the letter 'X', where 'X' is the initial letter of the Chinese pinyin for 'county'.
9
5
Share

How to align the timing chain on Hyundai ix35?

Here is the relevant introduction on aligning the timing chain for the Hyundai ix35: When the piston reaches the highest position, it marks the timing point below. The mark above requires opening the valve cover, and the timing is correct when both camshafts are parallel. The main function of the engine timing belt is to drive the engine's valve train, ensuring that the intake and exhaust valves open and close at the appropriate times to allow normal air intake and exhaust in the engine cylinders. Notes: 1. The interior of the Hyundai ix35 retains the rugged style consistent with its exterior. The cabin features almost no smooth curves, instead utilizing various horizontal and vertical designs. The dashboard is primarily made of hard plastic but includes textured and faux-stitching treatments to avoid an overly cheap feel. 2. In addition to the 2.0L naturally aspirated engine, the Hyundai ix35 also offers a newly added 1.4T turbocharged engine. The 2.0L naturally aspirated engine delivers a maximum power of 118kW (160PS) and a peak torque of 193N·m, while the 1.4T turbocharged engine produces a maximum power of 103kW (140PS) and a peak torque of 242N·m. In terms of transmission, the 2.0L naturally aspirated engine is paired with either a 6-speed manual or a 6-speed automatic transmission, whereas the 1.4T turbocharged engine is matched with a 7-speed dual-clutch transmission.
10
2
Share

What are the requirements for applying for a C1 driver's license?

C1 driver's license has a minimum age requirement of 18 years old, with no upper age limit. However, applicants aged 70 and above must pass tests on memory, judgment, and reaction abilities. The C1 driver's license is one of the codes for motor vehicle driver's licenses. The permitted driving scope of a C1 license includes small and mini passenger vehicles, light and mini cargo vehicles, as well as light, small, and mini special purpose vehicles. Small passenger vehicles must have a seating capacity of 9 or fewer people. The examination consists of four subjects: traffic regulations and related knowledge, field driving, road driving, and safe and civilized driving knowledge. Passing standards for the exams: Traffic regulations and related knowledge (Subject 1) – Written test, scored out of 100, with 90 or above required to pass. Field driving (Subject 2) – Conducted in a designated area with an actual vehicle. The minimum passing score is 80, and scores below 80 are failing. Road driving (Subject 3) – Conducted on roads or simulated areas with an actual vehicle. Scored out of 100, with 90 or above required to pass. Safe and civilized driving knowledge – Written test, featuring questions in the form of case studies, images, animations, etc. The test includes true/false, single-choice, and multiple-choice questions, totaling 50 questions. Scored out of 100, with 90 or above required to pass.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.