Where is the memory card of the dash cam located?

2 Answers
Brian
07/23/25 8:08pm
The memory card of a dash cam is generally located on the left or right side of the device. Here are the specific details about the dash cam memory card: 1. Automatic overwrite or manual deletion when full: Dash cams have a loop recording feature. When the memory card is full, the dash cam will automatically overwrite the oldest unlocked recordings based on the recording time, eliminating the need for manual deletion to continue recording. However, if too many emergency videos are recorded (which are not overwritten), the memory card may become full over time, requiring manual deletion to continue use. 2. Installation method: To install the dash cam memory card, first locate the memory card slot, usually found on the side of the dash cam main unit. Insert the memory card into the slot, paying attention to the correct orientation.
Was this review help?
2
3
Share
AmyFitz
08/10/25 6:06pm
I remember the memory card for the dash cam is usually inserted into the device itself, such as a small card slot on the side or bottom of the body, often marked with SD or TF. My first car was an entry-level sedan, and the card slot was easily visible near the windshield, making it convenient to pull out and replace the card at any time. Later, when I switched to an SUV with a more refined design, the card was hidden inside a flip cover on the rearview mirror bracket, a concealed location that prevents theft or heat damage. The position varies mainly depending on the car model and manufacturer's preference—domestic cars often expose it externally, while imported high-end models might integrate it into the wiring area under the dashboard. When replacing the card, it's essential to power off the device to avoid data loss, and it's recommended to use a high-quality MicroSD card to extend its lifespan. Regularly check if the card is loose after driving, as a full recording may stop and affect capturing critical moments.
Was this review help?
10
2
Share
Expand All
More Forum Discussions

Where is the cabin air filter located in the Volvo S80?

The cabin air filter in the Volvo S80 is located beneath the glove compartment on the passenger side. The replacement method involves removing the screws from the cover panel under the glove compartment, then taking off both the cover panel and the filter cover to access the cabin air filter inside. Simply remove the old filter and replace it with a new one, ensuring to correctly identify the front and back sides during installation. The Volvo S80 is a 4-door, 5-seater sedan under the Volvo brand, with body dimensions of 4851mm in length, 1861mm in width, and 1493mm in height, and a wheelbase of 2835mm. It is equipped with a turbocharged engine, delivering a maximum power of 149kW and a maximum torque of 300Nm.
14
3
Share

What are the body dimensions of the 2020 Haval H9?

The 2020 Haval H9 has body dimensions of 4856mm in length, 1926mm in width, and 1900mm in height, with a wheelbase of 2800mm. The main changes in the vehicle's exterior are concentrated on the front fascia, where the new grille features thicker chrome trim with a dual-slat design. Inside, the 2020 Haval H9's dashboard adopts a traditional symmetrical layout, wrapped in soft-touch materials and accented with chrome trim details. In terms of features, the vehicle is equipped with full-speed ACC adaptive cruise control, collision warning with emergency braking, lane departure warning with lane change assist, L2 autonomous driving, three differential locks, and a CCO low-speed off-road cruise function.
18
1
Share

What is MG?

MG is a British automobile brand, known as 'MG' in China. Taking the MG 6 as an example from the MG lineup, its body dimensions are 4695mm in length, 1848mm in width, and 1462mm in height, with a wheelbase of 2715mm. In terms of exterior design, the MG 6 features a dot-matrix design for the front grille, with the lower part of the grille designed in a trapezoidal shape. The side profile of the car adopts a dual waistline design, with the upper waistline extending from the rear of the headlights to the rear door panel, complementing the downward-sloping roofline. The car is equipped with a MacPherson independent front suspension and a multi-link independent rear suspension. It offers two transmission options: a TST 7-speed dual-clutch automatic transmission and a 6-speed manual transmission.
11
1
Share

Where Should a Dash Cam Be Installed?

A dash cam should be installed below the interior rearview mirror and connected to it, or mounted on the back of the interior rearview mirror. After installation, adjust the angle from the driver's position. A dash cam is a device that records images, sounds, and related information during vehicle travel. Installing a dash cam in a car allows for the recording of the entire driving process, including video and audio, which can serve as evidence in traffic accidents. The basic components of a dash cam include: 1. The main unit; 2. A speed sensor; 3. Data analysis software; 4. An infrared camera. To turn the dash cam on or off, press and hold the power button. It automatically turns on when connected to a charger and delays for 5 seconds before automatically turning off when the charger is disconnected by the owner.
2
2
Share

Why does the car move backward when in drive gear?

Because the engine's power and the reverse motion resistance of the transmission shaft are absorbed by the torque converter. Here are the specific details of related content: 1. Possible causes: It may be caused by a faulty transmission gear position sensor, valve body failure, or shift mechanism malfunction. Essentially, rolling backward on a slope means the car doesn't have enough power to climb, causing it to roll back. Alternatively, if the car is heavily loaded, the resistance might exceed the engine's output power. 2. Solutions: Automatic transmissions usually have a delay of more than 1 second! After shifting into drive gear, do not release the brake immediately, and the car won't roll backward. When rolling occurs, the correct approach is to brake promptly. If equipped with a hill-start assist system, wait for the system to function properly before starting again.
11
0
Share

How to Deal with Whitening of Exterior Plastic on Cars?

Solutions for whitening of exterior plastic on cars: 1. Use dashboard wax, which is typically applied to the dashboard or plastic parts for polishing. Using dashboard wax on whitened exterior plastic is both time-saving and labor-saving; 2. Use coating care agents, which can have a great effect on plastic parts. Whitened or dull plastic parts can be maintained with coating care agents; 3. Use shoe polish to cover it up. For black plastic parts that have whitened, black shoe polish works well and is convenient to use; 4. For wax that has stuck due to waxing, it can be removed with tar asphalt cleaner or by gently wiping repeatedly with a towel dipped in all-purpose water. Whitening of exterior plastic on cars is irreversible. Once whitened, it can only be concealed with maintenance products and cannot be maintained for long. It is recommended to regularly maintain the plastic parts both inside and outside the car.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.