···
Log in / Register

Where is the memory card located in a dash cam?

4 Answers
HaleyDella
09/03/25 7:33am

Front-mounted memory cards are generally located on the top of the device, while rear-mounted ones are typically positioned on either the left or right side of the unit. Below are the functions of dash cams and precautions for their use: Functions of dash cams: Provide drivers with strong evidence. When traffic accidents occur, drivers can immediately present evidence from the dash cam's recordings to protect their rights and interests; Assist traffic police in quickly handling accidents by using the video footage from dash cams to facilitate fair, just, and reasonable resolution of traffic incidents with speed, authenticity, and accuracy. Precautions for using dash cams: Vehicle owners are advised to regularly process data to prevent inconvenience from data loss when needed; Regarding installation position, it's recommended to mount near the interior rearview mirror for optimal visibility.

Was this review help?
6
0
Share
AnnieLynn
09/16/25 2:09am

In my experience, the memory card slot of a dashcam is usually located on the device body, such as a tiny notch design on the side or bottom, depending on the model. Some brands like Xiaomi or 70mai hide it under a plastic cover. After installing the dashcam, make sure the card is concealed to avoid attracting thieves. I use high-speed microSD cards, preferably 32GB or larger with Class 10 rating, to prevent lag during recording. It's advisable to export data to a computer and format the card weekly instead of waiting until it's full. While convenient access for insertion and removal is beneficial, it's also important to protect the slot from dust. Extending the card's lifespan means extending the chain of evidence for driving safety—it's absolutely crucial.

Was this review help?
5
5
Share
Expand All
McAxel
10/30/25 2:44am

When installing a dash cam, I always look for the card slot first, usually located in a small groove on the top or side of the device. When installing it in my own car, I found the card slot clearly marked—just insert the microSD card, making sure the direction is correct; otherwise, it won't record. I recommend choosing a 64GB capacity to reduce wear from frequent insertion and removal. Another consideration is the card's heat—avoid installing it near heat sources and regularly check if the card is making good contact. I keep my maintenance tools ready to ensure data is fully saved for every trip. Paying attention to these details brings much more peace of mind on the road.

Was this review help?
14
5
Share
Expand All
DiDallas
12/13/25 2:52am

I haven't been using the dash cam for long, and the card is inserted into a small slot on the device. The slot is usually located on the side, and you simply push the card in—the manual will specify the exact location. If the card is too small, the recording time will be short. I opted for a 32GB memory card, which provides sufficient storage. The slot is well-designed and not easily damaged by accidental contact. Regularly export the data to your phone or computer to avoid missing crucial evidence when needed. This small effort can save you from major trouble.

Was this review help?
20
4
Share
Expand All
More Forum Discussions

Which button is the handbrake for Volkswagen automatic transmission?

Automatic transmission handbrake is the P button. The handbrake is an auxiliary brake that uses a steel wire cable connected to the rear brake shoes to brake the vehicle. Below is an introduction to related content about brake shoes: 1. Brake Pads: Brake shoes, also known as brake pads, are consumable items. Wear on brake shoes means that during vehicle use, the brakes gradually wear down the brake shoes. When the wear reaches its limit, they must be replaced; otherwise, braking effectiveness will be reduced, potentially leading to brake failure and accidents. 2. Replacement: Some vehicles have a warning light on the dashboard when the brake shoes are worn, reminding the driver to replace the brake shoes promptly. Generally, new brake shoes are about 1.5 cm thick. If the brake shoes wear down to less than 5 mm, replacement is recommended.
9
5
Share

Does the Volkswagen CC have blue needles?

Volkswagen CC does have blue needles. Below is an introduction to the related content of the Volkswagen Polo: 1. Body dimensions: The Volkswagen Polo has body dimensions of 4053mm in length, 1751mm in width, and 1446mm in height, with a wheelbase of 2564mm. 2. Powertrain: The Volkswagen Polo is equipped with three gasoline engines (1.0L/1.0T/1.5T) and one 1.6T diesel engine, with maximum power ranging from 48kW (65PS) to 110kW (150PS). It is paired with a 6-speed manual, 6-speed automatic, or 7-speed dual-clutch transmission. 3. Features: Except for the base model, all trims come standard with ESP.
3
1
Share

Why does the Volkswagen Tiguan L suddenly stall while driving?

Volkswagen Tiguan L suddenly stalling while driving is due to poor fuse contact. Below is an introduction to the relevant content of the Volkswagen Polo: 1. Body dimensions: The Volkswagen Polo has body dimensions of 4053mm in length, 1751mm in width, and 1446mm in height, with a wheelbase of 2564mm. 2. Powertrain: The Volkswagen Polo is equipped with three gasoline engines (1.0L/1.0T/1.5T) and one 1.6T diesel engine, with maximum power ranging from 48kW (65PS) to 110kW (150PS), paired with a 6-speed manual, 6-speed automatic, or 7-speed dual-clutch transmission. 3. Features: ESP is standard across all trims except the base model.
16
2
Share

How Often Should Audi Brake Discs Be Replaced?

Audi brake discs do not have a specific replacement interval. When the vehicle's mileage reaches 100,000 kilometers, the brake discs should be inspected. If they are damaged or worn to the limit, they should be replaced promptly. The method for replacing brake discs is as follows: 1. Check the wear level of the brake discs. During regular maintenance, brake discs do not necessarily need to be replaced; the decision should be based on actual conditions. If there are grooves deeper than 3MM on the brake discs, they should be replaced. 2. Remove the front wheel tires. To replace the brake discs, the two front wheel tires must be removed, revealing the round discs which are the car's brake discs. 3. Remove the caliper mounting bolts. The brake discs are mounted on the front wheel bearings and secured by the brake caliper. Remove the two 18mm bolts on the brake shaft and take off the caliper. Since the caliper is connected to the oil line, lower it slowly to prevent the oil line from breaking. 4. Remove the old brake discs. The old brake discs are mounted on the front wheel bearings, and rust may form between the bearings and the discs. Use a hammer to tap the back of the brake disc while rotating it to ensure all sides are tapped. After several taps, the old brake discs can be removed. 5. Install the new brake discs. Align the holes on the new brake discs with those on the bearings and gently tap the inside of the discs with a hammer to secure them fully onto the bearings. 6. Reinstall the brake caliper. Position the caliper back in place and tighten the two mounting bolts. Rotate the bearings to check for any abnormal noises.
16
5
Share

What is the Problem if Changan Auto Air Conditioner is Not Cooling?

Specific reasons why Changan Auto air conditioner is not cooling: 1. Insufficient or low refrigerant: It may be caused by a small refrigerant leak. You can observe it from the sight glass on the dryer tank. When the air conditioner is running normally, if there are continuous and slow bubbles in the sight glass, it indicates insufficient refrigerant. If obvious bubble flipping occurs, it indicates severe refrigerant shortage. In this case, simply adding refrigerant will solve the problem. 2. Loose drive belt of the car air conditioner compressor: If the drive belt is loose, the compressor will slip during operation, leading to reduced transmission efficiency and decreased compressor speed. This results in reduced refrigerant compression and delivery, causing the car air conditioner to not cool. If the compressor drive belt is too loose, it should be tightened. If it cannot be turned by hand, it means the drive belt is too tight and should be loosened slightly. If tightening is ineffective or the drive belt shows cracks, aging, or other damage, a new drive belt should be replaced.
17
4
Share

Where is the fuel tank cap switch for the Volkswagen Touareg?

The fuel tank cap switch for the Volkswagen Touareg is located on the center console. Below is an introduction to related content about the Volkswagen Polo: 1. Body dimensions: The Volkswagen Polo has body dimensions of 4053mm in length, 1751mm in width, and 1446mm in height, with a wheelbase of 2564mm. 2. Powertrain: The Volkswagen Polo is equipped with three gasoline engines (1.0L/1.0T/1.5T) and one 1.6T diesel engine, with maximum power ranging from 48kW (65PS) to 110kW (150PS). It is paired with a 6-speed manual transmission, a 6-speed automatic transmission, or a 7-speed dual-clutch transmission. 3. Features: Except for the base model, all variants come standard with ESP.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.