Where is the mechanical keyhole of the Haval H2?

1 Answers
DiMary
07/29/25 12:16pm
The Haval H2 does not have a mechanical keyhole. Additional information about the Haval H2 is as follows: 1. The Haval H2 is a compact SUV under the Haval brand, equipped with a 1.5-liter turbocharged engine across all models. 2. The Haval H2's engine delivers a maximum power of 110 kW and a maximum torque of 210 Nm, with the maximum power achieved at 5600-6000 rpm and the maximum torque available between 1800-4400 rpm. This engine features multi-point fuel injection technology and utilizes an aluminum alloy cylinder head and block.
Was this review help?
5
1
Share
More Forum Discussions

When was China IV diesel implemented?

Diesel vehicles are divided into light-duty diesel vehicles and heavy-duty diesel vehicles, with different implementation times for each type. The specific times are as follows: 1. Light-duty diesel vehicles: On July 1, 2013, the China IV emission standard was implemented nationwide. 2. Heavy-duty diesel vehicles: On January 1, 2012, the China IV emission standard was implemented nationwide. Additional information is as follows: 1. Light-duty vehicles refer to those under 3.5 tons, while medium-duty vehicles refer to those over 3.5 tons. Private cars, which are light-duty gasoline vehicles, have been subject to the China IV emission standard nationwide since July 1, 2011. 2. The China IV standard, officially known as the National Phase IV Motor Vehicle Pollutant Emission Standard, was in effect until June 13, 2019, when China implemented the China V emission standard. The reason for frequent updates to emission standards is that as the number of vehicles increases, the environmental pollution caused by vehicle exhaust has become increasingly severe. 3. The main pollutants from vehicle emissions include HC (hydrocarbons), NOx (nitrogen oxides), CO (carbon monoxide), and PM (particulate matter). The national emission standards are primarily based on the European Union standards, with some adaptive modifications made to suit local conditions.
13
2
Share

What are the impacts of replacing the transmission in a new car?

Replacing the transmission in a new car with a new assembly will not cause any damage to the vehicle, nor will it have any impact on the car's future performance, as long as the replacement parts are original and improved. However, since the process involves engine hoisting, it may have some effect on the future resale value of the vehicle. Below is some extended information about transmissions: 1. Introduction: A device that changes the speed ratio and direction of motion. Used in automobiles, tractors, ships, machine tools, and various machines to alter the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft under different working conditions. Gear-driven transmissions generally consist of a housing and several gear pairs. 2. Classification: Automatic transmissions have become mainstream internationally, mainly including AT, AMT, CVT, and DCT types.
8
3
Share

What are the advantages of the BMW 3 Series?

BMW 3 Series advantages lie in its exterior and interior. Below are the specific details of the BMW 3 Series: 1. Configuration: The entire series comes standard with cruise control and a rearview camera with parking assist functionality. Models other than the 320i/Li will feature standard keyless entry. 2. Central Control System: The BMW 3 Series incorporates features such as in-car WeChat, short video applications, and indoor parking maps. In addition to keyless entry and advanced connected driving functions, it also includes a high-definition dashcam. 3. Powertrain: It is equipped with three versions of a 2.0T engine (high, medium, and low power outputs), paired with an 8-speed automatic transmission, and offers both rear-wheel drive and all-wheel drive options.
4
3
Share

How to know if your ETC is ready to use?

To determine if your ETC is ready to use, the method is: when passing through a toll station, use the ETC lane. If the fee is successfully deducted, the barrier will automatically lift, indicating that the ETC is successfully installed and can be used, meaning the device is operational. How ETC works: Through the on-board unit (OBU) installed on the vehicle's windshield, it communicates with the microwave antenna in the ETC lane at the toll station via dedicated short-range communication. This utilizes computer networking technology to process transactions with the bank in the background, allowing vehicles to pass through highway or bridge toll stations without stopping while still paying the required fees. Where ETC can be installed: For small vehicles like cars and minivans, the OBU device is installed on the upper middle part of the front windshield. For large vehicles like trucks and buses, it is installed on the lower middle part. ETC installation position requirements: The height should be no less than 1.2 meters and no more than 2.5 meters; the installation angle N should be between 30º and 90º (the angle between the surface of the electronic tag and the horizontal plane).
10
3
Share

What are the symptoms of a faulty car water pump?

When a car's water pump fails, it exhibits the following symptoms: 1. The engine coolant temperature continuously rises and cannot be lowered. 2. Leakage occurs near the water pump area of the engine. If the sealing is not properly maintained, coolant can seep into the water pump's bearings, washing away the lubricant and causing bearing damage. This type of leakage is considered internal leakage. 3. Unusual noises from the water pump area after starting the engine. If the car's water pump produces noticeable noise, it indicates that the internal components of the pump are beginning to fail. 4. The car experiences idle speed issues. The water pump is connected to the belt and draws cold water from the radiator. If the rotational resistance of the water pump is affected, it will directly impact the engine's RPM, leading to unstable vehicle speed conditions.
2
4
Share

Can the Bumper Be Pushed Back After Popping Up?

After the bumper pops up, it can be pushed back down, but avoid using excessive force. Here is more information about bumpers: 1. Function of the bumper: The car bumper (impact beam) is located in most areas at the front and rear of the car. It is designed to prevent external damage from affecting the vehicle's safety system and has the ability to reduce injuries to passengers during high-speed collisions. 2. Material of the bumper: Plastic bumpers consist of three parts: an outer panel, cushioning material, and a crossbeam. The outer panel and cushioning material are made of plastic, while the crossbeam is formed by stamping cold-rolled thin plates about 1.5 mm thick into a U-shaped channel. The outer panel and cushioning material are attached to the crossbeam, which is connected to the frame longitudinal beams with screws and can be removed at any time.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.