Where is the Mazda 5 Cabin Air Filter Located?

What to Do When ETC Fails to Respond?

Here are the solutions for when ETC fails to respond: 1. Ensure the vehicle speed is not too fast when passing through the ETC lane; 2. Check if the ETC device has become loose, fallen off, or been self-disassembled, causing the anti-tamper switch to pop out—reset all data if necessary; 3. Charge the ETC device; 4. Verify if the ETC card belongs to the current vehicle. The installation method for ETC is as follows: 1. Inspect the ETC card and OBU for any damage. Press the anti-tamper button on the OBU—a red light will briefly illuminate, and the OLED screen will display "Please insert card," indicating the device is functioning normally; 2. Clean the front windshield, ensuring the glass surface is dry. Peel off the adhesive backing film of the OBU and stick it to the installation position, pressing firmly with your hand for 2 to 3 minutes; 3. Insert the ETC card with the front side facing the driver and the back side facing the windshield, then insert the chip into the device.

9

0

Share

Where is Acura produced?

Acura is a Japanese-produced car, which is a high-end luxury brand under Honda. Taking the 2020 Acura RDX as an example, it is a mid-size 5-door 5-seat SUV with body dimensions of 4752mm in length, 1926mm in width, 1668mm in height, and a wheelbase of 2750mm. The 2020 Acura RDX is equipped with a 2.0L turbocharged engine and a 10-speed automatic transmission, with a maximum power of 195 kW and a maximum torque of 380 Nm. Its drivetrain is front-wheel drive, with a front suspension using a MacPherson independent suspension and a rear suspension using a multi-link independent suspension.

15

2

Share

What is the Difference Between Imported Cars and Joint Venture Cars?

The differences between imported cars and joint venture cars are: 1. Different channels: Imported cars are imported as complete vehicles; joint venture cars are either domestically produced as complete vehicles or assembled in China after importing some parts, with some models undergoing minor modifications. 2. Different configurations: Imported cars come with complete configurations; joint venture cars may omit features such as bumpers, anti-collision beams, daytime running lights, and ESP, which can affect vehicle safety. Imported cars refer to vehicles purchased by traders from overseas markets and introduced into the Chinese market for sale without authorization from the brand manufacturer. Joint venture cars are produced through a partnership between Chinese and foreign investors, where the Chinese side provides land, factory usage rights, and capital, while the foreign investors contribute the brand, technology, capital, talent, etc., for assembly and sales within China.

8

0

Share

How to Shift Between D and S Gears in an Automatic Transmission?

Automatic transmission shifting between D and S gears is done by directly pushing the gear lever to switch. In an automatic transmission, the driver does not need to manually shift gears; the vehicle automatically selects the appropriate gear based on the driving speed and traffic conditions. The D gear in an automatic transmission refers to the manual mode of a semi-automatic transmission, allowing manual control over gear shifting (both upshifting and downshifting). When using the D gear, there is no need to press the brake or release the accelerator. The S gear is the sports mode of the car, where the transmission can shift freely, but the shifting timing is delayed, keeping the engine at high RPM for a longer period. This allows the car to maintain low gear and high RPM for an extended time, resulting in greater torque output and acceleration.

15

4

Share

Where is the manufacturer of Baojun cars located?

Baojun cars are manufactured in China. It is an independent automotive brand created by SAIC-GM-Wuling. Taking the 2020 Baojun 310w as an example, it is a compact 5-door, 5-seater station wagon with body dimensions of 4620mm in length, 1710mm in width, and 1535mm in height, with a wheelbase of 2750mm. The 2020 Baojun 310w is equipped with a 1.5L naturally aspirated engine and a 5-speed mechanical automatic transmission, delivering a maximum power of 77 kilowatts and a maximum torque of 135 Newton-meters. It features front-wheel drive, with a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear.

6

3

Share

What are the trunk dimensions of the Ora R1?

The trunk dimensions of the Ora R1 are: length 500 to 1170mm, width 1100mm, height 860mm. The Ora R1 is a micro 5-door, 4-seat hatchback with body dimensions of: length 3495mm, width 1660mm, height 1560mm, and a wheelbase of 2475mm. The Ora R1 is equipped with a permanent magnet synchronous single motor and a single-speed transmission for electric vehicles, with a maximum power of 35 kW and a maximum torque of 125 Nm. It features front-wheel drive, with a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear.

1

0

Share

Where is the Mazda 5 Cabin Air Filter Located?

What to Do When ETC Fails to Respond?

Where is Acura produced?

What is the Difference Between Imported Cars and Joint Venture Cars?

How to Shift Between D and S Gears in an Automatic Transmission?

Where is the manufacturer of Baojun cars located?

What are the trunk dimensions of the Ora R1?

Is there a difference between original factory paint and 4S store touch-up paint?

What is the horsepower of the Mercedes-AMG GTR Pro?

What are the differences between the Mercedes-Benz E300L Fashion and Luxury models?

What are the precautions for vehicles passing through tunnels?