Where is the Mazda 323 engine number located?

1 Answers
AnastasiaLee
07/24/25 9:21pm
Mazda 323 engine number is located on the decorative cover at the top of the engine. In addition to the above method, the engine number can also be checked through the following 4 ways: The vehicle's driving license has the engine number printed on it, usually located on the second-to-last line; The motor vehicle registration certificate will state the engine number; The car purchase invoice will state the engine number; The vehicle purchase tax payment certificate will state the engine number. It should be noted that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer, and the engine model can be the same. The engine number refers to the production number of the engine, each engine can only use one engine number and each engine's number is unique.
Was this review help?
15
2
Share
More Forum Discussions

How Often Should the Brake Fluid in a Sagitar Be Replaced?

Sagitar brake fluid should be replaced every two years or 40,000 kilometers. Below is relevant information about brake fluid: 1. Introduction to Brake Fluid: Brake fluid is made from refined diesel distillate with thickeners and antioxidants added. 2. Checking the Moisture Content in Brake Fluid: Brake fluid has a certain level of corrosiveness and strong water absorption. A dedicated brake fluid tester can be used to check the moisture content in the brake fluid to determine if replacement is needed. You can also observe the color of the brake fluid; if it appears black, it likely needs replacement. 3. Brake Fluid Should Not Be Mixed: Note that different types and brands of brake fluid should not be mixed. Due to differing formulations, mixing brake fluids can reduce their performance indicators.
9
1
Share

Where is the gear shift on a Mercedes-Benz?

On a Mercedes-Benz, the gear shift is located on the steering column below the steering wheel, as Mercedes-Benz uses a column shifter. The gear arrangement is the same as that of a conventional automatic transmission: pulling upwards sequentially engages N (Neutral) and R (Reverse), while pushing downwards engages D (Drive). Pressing the P button activates the parking gear. The electronic gear shift can only be operated when the key is in position 2 or when the vehicle is started. There are two types of gear shifts in Mercedes-Benz vehicles: 1. The non-electronic gear shift functions similarly to conventional ones, though the shifting path is more complex to use. 2. The electronic gear shift is positioned where the windshield wiper switch is typically located in regular cars. Pulling upwards sequentially engages N (Neutral) and R (Reverse), pushing downwards engages D (Drive), and pressing the P button activates the parking gear. The electronic gear shift can only be operated when the key is in position 2 or when the vehicle is started.
8
4
Share

Why Does Volvo Depreciate So Much?

Because Volvo uses significant price reductions to achieve better sales. Here is relevant information about Volvo: 1. Background: In 1927, the first Volvo car was introduced and mass-produced. As Volvo's sales continued to improve, by 1935, Volvo separated from SKF and became an independent automotive group. Before 1998, Volvo Cars not only produced passenger vehicles but also expanded into aerospace and various industrial equipment manufacturing. In 1998, Ford Motor Company acquired Volvo Cars' business, including the ownership of the Volvo brand. In 2010, China's Geely Group purchased Volvo Cars' business and brand ownership from Ford. 2. Safety: Volvo's safety has always been widely recognized as outstanding. Among its entire brand lineup, the XC90 is particularly renowned as the safest car in the world. In the most stringent IIHS crash tests in the U.S., the XC90 consistently achieves top-tier ratings every year, continuously setting new records for itself.
16
2
Share

What is the appropriate gauge for car jumper cables?

Car jumper cables with 25 square millimeters of copper wire are most suitable. Because the current is large when starting the engine, the lower the resistance of the jumper cables, the better. Method for using car jumper cables: First, clamp the red wire of the jumper cable onto the red positive terminal of the "dead car's" battery, then clamp the other end of the red wire onto the red positive terminal of the "rescue car's" battery; Clamp both ends of the black wire onto the black negative terminals of the "dead car" and the "rescue car's" batteries; Start the engine of the "rescue car" first; Then start the engine of the "dead car". Precautions for using jumper cables: After successfully starting the engine, the jumper cables must be removed in the correct order; otherwise, it may cause a short circuit. If the dead car still fails to start, check whether there is poor contact in the metal connection parts.
17
5
Share

What to Do When the Brake Pedal Is Hard to Press and the Engine Won't Start?

Solutions for when the brake pedal is hard to press and the engine won't start: 1. The owner can try restarting the engine and firmly press the brake pedal. Once the engine starts, the brake should return to normal. 2. If pressing the brake multiple times doesn't resolve the issue, the owner should seek a nearby repair shop to diagnose and fix the problem before continuing to drive. The sudden hardening of the brake pedal is usually due to the owner pressing the brake several times after turning off the engine, which depletes the vacuum in the brake booster, making it difficult to press the pedal without assistance. Owners should also pay attention to proper braking techniques during normal driving. At low speeds, emergency braking can be applied by firmly pressing the brake pedal in case of sudden events ahead. However, this should be avoided at high speeds to prevent the vehicle from skidding or rolling over.
3
1
Share

What does label removal mean?

OBU device's anti-tamper button on the back pops up and locks. Here is the relevant introduction about label removal: 1. Introduction: There is a locking button on the back of the device. Once the OBU falls off the front windshield, the locking button will activate, causing the ONU to become unusable. If the OBU falls off, it needs to be reattached, and then reactivated at the highway management office's ETC service point. 2. Recovery method: Self-activation method: Most ETC devices will not become invalid. At this time, you can boldly remove the electronic tag, or you can press the electronic tag tightly with your hand, and then use a wall knife to cut the double-sided tape and the bonding surface of the windshield. During the whole process, be careful to avoid the ETC anti-tamper switch from popping up. 3. Business hall activation method: Start the ETC system software, insert the ETC white card into the card slot, enter the owner and vehicle model information in the system, click the card making button, and then take out the card slot.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.