Where is the manufacturer of Fengxing T5 located?

1 Answers
StDonovan
07/29/25 9:34pm
Dongfeng Fengxing is produced at the third production base of Dongfeng Liuzhou Automobile in Liuzhou. Below is relevant information about Dongfeng Fengxing T5: 1. Launch time: Dongfeng Fengxing T5 was officially launched on September 16, 2018, and the new Fengxing T5 was officially launched on August 18, 2019. 2. Interior: The 2018 Fengxing T5's interior adopts a color-blocking scheme, with the center console tilting towards the driver's side of the new Fengxing T5, equipped with a 12.3-inch LCD instrument panel and a 12-inch floating central control screen. The new Fengxing T5's interior features an overall new dual-color scheme, with a wraparound soft plastic molding design, creating a more sporty atmosphere; the dual 12-inch large screens and 16-color breathing multi-color ambient lighting integrate the high-tech feel of the T series.
Was this review help?
8
5
Share
More Forum Discussions

What are the causes of brake disc noise?

The causes of brake disc noise are: 1. Corrosion of the brake disc or brake pads; 2. The brake pads are new; 3. Excessive wear of the brake disc and brake pads; 4. The brake pads are installed incorrectly or the model does not match; 5. Use of inferior or overly hard brake pads; 6. Abnormal brake caliper or lack of brake fluid; 7. Presence of foreign objects between the brake drum or disc and the shoes. The solutions for brake disc noise are: 1. Apply butter or special lubricating oil at the connection between the brake pads and the brake caliper; 2. Regularly inspect and replace the brake pads; 3. Regularly adjust the brakes; 4. Avoid frequent use of the brakes.
18
4
Share

What is the reason for the squeaking sound when stepping on the clutch in a car?

The reasons for the squeaking sound when stepping on the clutch in a car are: 1. Excessive wear of the clutch release bearing; 2. Failure of the diaphragm spring; 3. Poor lubrication; 4. Loose or damaged clutch; 5. Broken or excessively worn clutch release lever; 6. Broken adjustment bolt of the release lever. The solutions for the squeaking sound when stepping on the clutch are: 1. Lubricate the release bearing with grease; 2. Replace the clutch pedal assembly; 3. Check the working condition of the clutch release lever; 4. Inspect whether the clutch spring is damaged. Types of clutches: electromagnetic clutch, magnetic particle clutch, friction clutch, and hydraulic clutch.
4
0
Share

Is There a China 7 Emission Standard?

Currently, there is no China 7 standard. China's emission standards are divided into: China 1, China 2, China 3, China 4, China 5, and China 6. Below are the detailed introductions: China 1 Standard: Implemented nationwide on July 1, 2001, referencing Euro 1 standards, it mainly set limits for carbon monoxide, hydrocarbons, and particulate emissions, with carbon monoxide at 3.16 grams per kilometer and hydrocarbons at 1.13 grams per kilometer, etc. Vehicles meeting the China 1 standard are classified as China 1 vehicles, and so on for the following standards. China 2 Standard: Implemented nationwide on July 1, 2004. In preparation for the Olympics, Beijing implemented it earlier. The China 2 standard further improved emission requirements compared to China 1, reducing single-vehicle pollutant emissions of carbon monoxide by 30%, and hydrocarbons and carbon oxides by 55%. China 3 Standard: Implemented nationwide on July 1, 2007. To reduce pollutant emissions, China 3 vehicles underwent upgrades and modifications in engine and exhaust system technologies, including the addition of vehicle self-diagnostic systems and upgrades to three-way catalytic converters. Total pollutant emissions for China 3 were reduced by 40% compared to China 2. China 4 Standard: Implemented nationwide on July 1, 2010. Compared to China 3, China 4 upgraded the post-emission treatment system, reducing pollutant emission standards by 50% to 60% compared to China 3. China 5 Standard: Implemented nationwide on January 1, 2018, the China 5 standard imposed stricter limits on nitrogen oxides, hydrocarbons, carbon monoxide, and suspended particles from motor vehicle emissions. Compared to China 4, nitrogen oxide emissions were reduced by 25%, and additional limits were placed on non-methane hydrocarbons and PM emissions, aiming to reduce air pollution and combat smog. China 6: Enacted at the end of 2016, China 6 is hailed as the strictest standard to date. This standard no longer solely references European standards but introduces China-specific driving conditions while also drawing from U.S. standards.
4
5
Share

What car brand has an inverted 7 logo?

The inverted 7 logo represents Lexus vehicles, which include models such as the Lexus ES, Lexus RX, Lexus LS, Lexus NX, and Lexus LC. Taking the Lexus LS as an example, it is classified as a full-size luxury sedan with the following dimensions: length 5235mm, width 1990mm, height 1450mm, wheelbase 3215mm, fuel tank capacity 82 liters, and trunk capacity 430 liters. The Lexus LS is powered by a 3.5L naturally aspirated engine, delivering a maximum horsepower of 299 PS, peak power of 220 kW, and maximum torque of 350 Nm, paired with a 10-speed ECVT automatic transmission.
3
0
Share

How to Charge the Volkswagen Passat New Energy Vehicle?

To charge the Volkswagen Passat New Energy Vehicle, you can use a household portable charger by plugging it into a standard household socket. Taking the 2021 Volkswagen Passat New Energy as an example, its body structure is a four-door, five-seater sedan with the following dimensions: length 4948mm, width 1836mm, height 1469mm, wheelbase 2871mm, fuel tank capacity 50l, trunk capacity 400l, and curb weight 1730kg. The 2021 Volkswagen Passat New Energy features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, maximum power of 110kW, and maximum torque of 250Nm.
6
3
Share

Is it normal for the engine to hum when braking in D gear?

It is normal for the engine to hum when braking in D gear. However, if the vibration is severe, it may indicate that the engine mount is damaged. The engine is connected to the frame via engine mounts, which are typically made of rubber. These mounts help absorb engine vibrations. Without them, the vibrations from the engine would directly transfer to the car body, affecting ride comfort. When waiting at a red light, if there are only a few seconds left, you can keep the car in D gear while braking. If the light has just turned red, you can shift to N gear. Avoid using P gear when waiting at a red light, as shifting to P gear and getting rear-ended by another vehicle could damage the transmission.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.