Where is the maintenance switch for the Corolla Hybrid?

1 Answers
DiJulia
07/29/25 11:26pm
Corolla Hybrid maintenance switch is located at the lower left side of the steering wheel, near the headlight switch. Corolla Hybrid maintenance mode steps: Without pressing the brake, press the power button to start, depress the accelerator pedal twice firmly, press and hold the brake to shift into D gear and depress the accelerator pedal twice firmly again, then press and hold the brake to shift into P gear and depress the accelerator pedal twice firmly, finally press and hold the brake and press the power button to start the engine to successfully enter maintenance mode. Introduction to hybrid vehicles: HEV (Hybrid Electric Vehicle), also known as mild hybrid. Although hybrid models are hybrid vehicles, they are not new energy vehicles and do not enjoy national new energy subsidies or other policy benefits, and must be registered with blue license plates. The most important feature of HEVs is that they do not require charging, and their operation mode is no different from that of conventional fuel vehicles. The battery capacity and motor power in the vehicle are relatively small, only playing an auxiliary role to the engine, participating in driving only during startup, low-speed driving, or uphill sections, thereby reducing engine load to lower fuel consumption.
Was this review help?
19
5
Share
More Forum Discussions

How to Display the Car's Driving Range?

Press the MENU button on the combination switch lever, and the speed and comprehensive fuel consumption interface will appear. Then use the knob at the top of the lever to switch to the driving range. Below is relevant information about the driving range: 1. Driving range, also referred to as endurance capability, is the total distance a vehicle or ship can travel continuously with maximum fuel reserves. For electric vehicles, the driving range refers to the distance traveled from a fully charged state of the power battery to the end of the test under standard conditions. It is an important economic indicator for electric vehicles. 2. The driving range of new energy vehicles refers to the distance traveled at a constant speed under ideal road conditions, wind speed, and temperature after a full charge. Hybrid vehicles and lead-acid battery vehicles (low-speed vehicles) generally have a relatively shorter driving range.
7
1
Share

Should the car DUAL button generally be turned on?

This button is the car air conditioning's dual-zone temperature adjustment button. If you want to adjust the temperature in separate zones, you can press this button. If you do not want to adjust the temperature in separate zones, there is no need to press this button. Below is relevant information about the DUAL button: 1. The DUAL button in a car is the dual-zone air conditioning adjustment button, also known as the dual-zone air conditioning button. This button is only present in cars equipped with dual-zone automatic air conditioning. Additionally, not all car models refer to this button as DUAL—some models use the SYNC button for adjustment. The name of this button may vary depending on the car model, but the function is essentially the same. 2. When the DUAL switch is pressed and the indicator light turns on, you can individually adjust the air conditioning temperature for the driver's seat or the passenger seat. After adjusting to the desired temperature, turning off this button will allow the automatic air conditioning to regulate the temperature according to the set values.
14
4
Share

What Causes Difficulty in Cold Starts but Normal Operation When Warm?

The reasons for difficulty in cold starts but normal operation when warm are as follows: 1. Poor fuel quality. Low-quality fuel often has poor volatility, especially during cold starts in winter when the engine block temperature is low, making fuel atomization difficult. This results in insufficient mixing of fuel and air in the combustion chamber, leading to starting difficulties or even failure to start. 2. Carbon deposits. The lower the temperature, the more fuel is required for a cold start, and the presence of carbon deposits significantly affects the success of the cold start. Carbon deposits in various parts of the engine negatively impact its normal operation. 3. Untimely spark plug replacement. Cold starts require higher ignition energy, and after a certain mileage, the electrode gap of spark plugs widens. If this exceeds the standard, the spark energy generated will weaken considerably, failing to properly ignite the air-fuel mixture in the cylinder, making it naturally difficult to start.
10
1
Share

What are the tips for curve driving in Subject 2 of the driving test?

Driving license Subject 2 curve driving skills are as follows: 1. When the left front corner coincides with the right sideline, turn the steering wheel one circle to the left. After turning one circle, keep the front corner of the car aligned with the right sideline. If there is any deviation, correct it by adjusting the steering wheel, with the correction range within half a circle. When approaching the junction of the right curve, straighten the steering wheel. At this point, the left front corner of the car body will nearly coincide with the left sideline. After straightening the steering wheel, proceed forward. 2. As the car moves forward, the AB segment curve will gradually move toward the left side of the engine hood. Slowly turn the steering wheel to the left to keep the left ridge of the engine hood aligned with the AB segment curve. 3. Enter the curve test with the car head aligned to the right yellow line. The rear wheels may press the line, so enter the curve driving section at a low speed.
13
3
Share

What does the Buick Excelle GT mean?

Buick Excelle GT is a sedan. More information about it is as follows: 1. The Excelle XT is a hatchback, while the GT is a sedan. 2. The Excelle GT is a sedan meticulously crafted for individuals who pursue quality in life, offering a perfect driving experience that surpasses expectations. With globally leading technology and automotive craftsmanship, it truly integrates performance with comfort. Known as the "little LaCrosse," the Buick Excelle GT sets a new standard in the mid-to-high-end car market with its premium sedan capabilities. Leveraging advanced global technology and manufacturing techniques, it redefines the conventional definition of mid-size cars by seamlessly blending performance and comfort. It caters to the contemporary values of the new generation of mainstream achievers who seek perfection, aiming to provide them with an all-around upgraded "premium" sensory experience and helping them expand their horizons in life as they strive for continuous progress.
8
5
Share

What is the adjustment method for the brake master cylinder push rod?

Locate the push rod of the cylinder, which has two screws on it. Adjust the push rod travel by tightening or loosening these screws. Below is a related introduction to the brake master cylinder: 1. The brake master cylinder, also known as the "brake main cylinder" or "brake master cylinder," is a key component of the vehicle's braking system. In oil-brake systems, the master cylinder has a reservoir for brake fluid at the top, while the lower part contains a cylinder with a piston and inlet/outlet ports. 2. Its working principle is as follows: When the brake pedal is pressed, the piston inside the cylinder is pushed by the force from the pedal, and the push rod transmits this force to pressurize the brake fluid, which is then sent to each wheel's brake slave cylinder to generate braking force. When the brake pedal is released, the outlet port of the master cylinder closes, and the inlet port opens, allowing the brake fluid to flow back from the slave cylinders to the master cylinder, returning to its original state.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.