Where is the main switch of BAIC New Energy located?

What type of oil does the Highlander 2.0t use?

The Highlander 2.0t uses Toyota's specialized 0w20 engine oil, which serves to lubricate and reduce friction in the engine, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption. Taking the 2020 Highlander 2.0t as an example, its body dimensions are: length 4890mm, width 1925mm, height 1715mm, with a wheelbase of 2790mm and a fuel tank capacity of 72.5 liters. The 2020 Highlander 2.0t features a MacPherson strut front suspension and an E-type multi-link rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 220PS, a maximum power of 165kW, and a maximum torque of 350Nm, paired with a 6-speed automatic transmission.

13

3

Share

What are the causes of grooves on brake discs?

The causes of grooves on brake discs are: 1. Driving habits, often uneven distribution of braking force between front and rear; 2. Foreign objects getting stuck between the brake disc and brake pads, especially when heavy braking occurs at that moment; 3. Uneven force distribution of brake calipers; 4. Manufacturing defects in brake pads, resulting in uneven mixing of materials. The steps for replacing brake discs are: 1. Lift the vehicle and remove the tire; 2. Remove the screws of the brake caliper, open the brake caliper, and take out the old brake pads; 3. Push the brake piston back in and install the new brake pads; 4. Reinstall the brake caliper, tighten the caliper screws to the required torque, and reinstall the tire; 5. Press the brake pedal several times to eliminate the gap between the brake pads and the brake disc, allowing the brake piston to reset; 6. Check if the brake fluid pump is functioning properly.

14

2

Share

How to Cancel the Maintenance Reminder for Haval H6?

The method to cancel the maintenance reminder for Haval H6 is: 1. Turn off the key, press and hold the button at the bottom right of the instrument panel; 2. Turn the key to the position where all the instrument lights are on, and you will notice that the small wrench icon on the instrument panel stops flashing; 3. Release the button and then press the button at the bottom left of the instrument panel, and you will see the small wrench icon disappear, indicating the successful cancellation of the maintenance reminder. Taking the 2021 Haval H6 as an example, it is a compact SUV with the following dimensions: length 4615mm, width 1860mm, height 1720mm, wheelbase 2680mm, fuel tank capacity 58l, and curb weight 1675kg.

14

1

Share

What transmission does the Nissan Kicks use?

The transmission brand used in the Nissan Kicks is JATCO. JATCO, a subsidiary of Nissan Motor, is one of the world's largest manufacturers of automatic transmissions. Its main products include stepped automatic transmissions (AT) and continuously variable transmissions (CVT). The company operates in Europe, Asia, and the Americas, serving customers in over 30 countries worldwide. The Nissan Kicks is equipped with the new X-TRONIC CVT intelligent continuously variable transmission. CVT, which stands for Continuously Variable Transmission, is what we commonly refer to as a stepless transmission. It does not have fixed gear ratios; instead, the shifting process involves a linear increase or decrease within the maximum transmission ratio range. Its standout features include smooth shifting, more flexible gear settings, and better fuel efficiency, which is why more and more manufacturers are adopting it. When using the Nissan Kicks' transmission in daily driving, pay attention to the following points: Do not neglect transmission fluid changes for extended periods. Although many models now use maintenance-free transmission fluid, "maintenance-free" does not mean it never needs replacing. Prolonged failure to change the transmission fluid can lead to damage to internal components such as bearings and the housing. Avoid coasting in neutral for long durations. While many experienced drivers might coast in neutral when driving manual transmission vehicles, doing so in an automatic transmission can cause overheating. Additionally, shifting back into Drive (D) from neutral can create a noticeable jolt. Never shift into Drive (D) or Reverse (R) before the vehicle has come to a complete stop. Some drivers, in an attempt to demonstrate smooth operation, shift into reverse while the car is still moving, which can severely damage the transmission gears and eventually lead to gear grinding or other failures. Avoid frequently climbing steep slopes in Drive (D). When tackling steep inclines, automatic transmission vehicles may overheat due to high load or upshift prematurely, resulting in insufficient power. In such cases, use manual mode to lock in a lower gear or switch to sport mode to protect the transmission. Do not tow the vehicle over long distances. If the automatic transmission vehicle breaks down, use a flatbed tow truck to transport it while the vehicle is in Neutral (N). Avoid using tow ropes or dragging the vehicle directly, as this can damage the transmission.

9

2

Share

What Causes Water Leakage Under the Car Chassis?

Water leakage under the car chassis can be caused by: 1. Condensation water from the air conditioning system draining under the chassis; 2. Damage to the windshield washer fluid pipe due to chassis scraping. Solutions for chassis water leakage include: 1. Installing an additional air conditioning drain pipe; 2. Replacing the windshield washer fluid pipeline; 3. Adding a chassis protective plate. The functions of a car chassis are: To support and mount the engine and its components/assemblies, form the vehicle body shape, receive engine power to enable motion, and maintain normal driving. Chassis maintenance methods include: 1. Regularly inspecting tire conditions; 2. Periodically cleaning and wiping the chassis; 3. Promptly checking component operation during driving; 4. Regular maintenance of shock absorbers.

8

2

Share

What are the consequences of a timing belt breakage in a sedan?

The consequences of a timing belt breakage in a sedan include: loss of vehicle power, poor acceleration and unstable idling, abnormal engine noises, and in severe cases, it can lead to engine failure. The timing belt plays a connecting role, linking the timing wheel on the engine cylinder head at the top and the crankshaft timing wheel at the bottom. The method for replacing the timing belt is as follows: 1. Lift the vehicle and remove the right front wheel fender liner; 2. Remove the generator belt and the generator belt tensioner; 3. Loosen the crankshaft pulley screw; 4. Open the engine hood and remove the water reservoir; 5. Remove the engine mounting bracket and the protective cover on the timing belt; 6. Unscrew the generator fixing screw and remove the generator; 7. Remove the cylinder block mounting bracket and take off the crankshaft pulley; 8. Rotate the crankshaft to the top dead center position of the cylinder and mark it; 9. Remove the timing belt and the timing tensioner to complete the replacement.

15

1

Share

Where is the main switch of BAIC New Energy located?

What type of oil does the Highlander 2.0t use?

What are the causes of grooves on brake discs?

How to Cancel the Maintenance Reminder for Haval H6?

What transmission does the Nissan Kicks use?

What Causes Water Leakage Under the Car Chassis?

What are the consequences of a timing belt breakage in a sedan?

What is the solution for the Buick Excelle P0342 fault?

How Many Layers Does Car Paint Have?

What are the symptoms of a damaged brake caliper?

How Many Years Does a Start-Stop Battery Generally Last?