Where is the Lynk & Co 05 produced?

1 Answers
DelLucille
07/28/25 5:40pm
Lynk & Co 05 is produced at the Yuyao factory in China. Below is some information about the Lynk & Co 05: 1. Exterior: The Lynk & Co 05 is a compact crossover SUV under the Lynk & Co brand. It has a wheelbase of 2734mm, a length of 4592mm, a width of 1879mm, and a height of 1628mm. 2. Powertrain: The Lynk & Co 05 is equipped with a 2.0-liter turbocharged engine across all variants. This engine delivers 254 horsepower and a maximum torque of 350 Nm, with a maximum power output at 5500 rpm and maximum torque available between 1800 to 4800 rpm. The engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. Additional information: The Lynk & Co 05's engine is paired with an 8-speed automatic transmission (8AT). The advantages of this transmission include: 1. Enhanced comfort. The 8AT improves ride comfort and fuel efficiency. 2. Smooth operation. The 8AT offers excellent shift smoothness and is known for its high reliability and durability.
Was this review help?
2
4
Share
More Forum Discussions

What is the maximum speed limit for non-motor vehicles?

Non-motor vehicles must not exceed a speed of 15 kilometers per hour. Additional information: 1. Non-motor vehicles: Non-motor vehicles refer to vehicles that are driven by human or animal power and operate on roads, as well as vehicles with power devices but designed with maximum speeds, empty vehicle weights, and dimensions that comply with relevant national standards, such as motorized wheelchairs for the disabled. This includes trailers, freight handcarts, and animal-drawn vehicles. 2. Traffic regulations: Adhere to safety regulations and drive in designated lanes. When riding a bicycle or tricycle and needing to cross a motor vehicle lane, the rider should dismount and push the vehicle. If there is a crosswalk or pedestrian crossing facility, it should be used; if there is no crosswalk, no pedestrian crossing facility, or it is inconvenient to use such facilities, proceed straight after ensuring safety. Non-motor vehicles that cannot travel in their designated lane due to obstruction may use the adjacent motor vehicle lane in the affected section and must return to the non-motor vehicle lane promptly after passing the obstructed area. Motor vehicles encountering such situations should slow down and yield.
11
2
Share

What is the wading depth of the Hongguang Mini?

The wading depth of the Hongguang Mini is 125mm. The wading depth of the Hongguang Mini is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, off-road vehicles and SUVs have obvious advantages. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Hongguang Mini is below the water level while wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth must not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before the vehicle enters the water, the auto start-stop function must be turned off to prevent the engine from automatically restarting after stalling in the water, which could cause severe damage due to water intake; Assess the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Observe the path taken by other vehicles and follow it at low speed, avoiding sudden acceleration or deceleration; For roads prone to water accumulation, observe warning water level markers, trees, or other vehicles' wheels and doors as reference points to judge the water depth before deciding whether to proceed; Know your vehicle's safe wading depth. If the water depth exceeds half the tire height or the engine's air intake, do not enter the water recklessly; choose an alternative route instead.
20
1
Share

How to Set Memory for Power Seats?

Method for setting memory on power seats: After ignition starts, adjust the seat to a comfortable position and the desired preset location. Press the SET button on the door panel and hold for approximately 3 seconds until the SET light illuminates. Then select to store the position to memory 1 or 2. Upon hearing a beep sound, the seat position is memorized. When driving again, simply press the preset 1 or 2 to recall the position. In some mid-to-high-end models with advanced configurations, the driver's seat generally features a memory function, and this feature key is highly convenient and practical. The power seat memory integrates the power seat with the vehicle's computer system, adding memory functionality to the seat and enabling intelligent management of various seat information parameters.
13
0
Share

Where to Check the Emission Standards for New Cars?

Methods to check the emission standards for new cars are: 1. Bring the vehicle registration certificate and driving license to the vehicle management office for inquiry. 2. Check the environmental protection label. 3. Log in to the Motor Vehicle Environmental Protection Network for inquiry. 4. Check the vehicle's factory certificate. 5. Roughly determine based on the year of vehicle registration: China I emission standard: Fully implemented nationwide on July 1, 2001. China II emission standard: Fully implemented nationwide on July 1, 2004. China III emission standard: Fully implemented nationwide on July 1, 2007. China IV emission standard: Fully implemented nationwide on July 1, 2011. China V emission standard: Fully implemented nationwide on January 1, 2018. Additional information: 1. The purpose of establishing automobile emission standards is to control and reduce vehicle emission pollutants and improve ambient air quality. Automobile emission pollutants include: carbon monoxide, hydrocarbons, nitrogen oxides, and PM harmful gases. 2. Solutions for non-compliant vehicle emissions include: cleaning the fuel injector, replacing piston sealing rings, and using higher-quality fuel.
2
2
Share

How to Close Windows with the Key for URV?

URV's method for closing windows with the key: Simply press the lock button, then hold it down to close the windows. Here is more information about the URV: 1. Exterior: The Honda URV features a large-mouth style front grille design, with chrome trim at both ends integrated into the headlight assembly. The new model also adopts a new wheel design and adds new decorative elements to the front fenders. 2. Configuration: The new model comes standard with cruise control, keyless entry, one-touch start, tri-zone independent air conditioning, B-pillar air vents, and tire pressure monitoring. Additionally, it is equipped with the HONDA CONNECT intelligent guidance system, including in-car WiFi, smart connectivity, navigation multimedia entertainment, and road assistance. 3. Powertrain: Offers a choice between 1.5T and 2.0T turbocharged engines, delivering robust performance.
6
2
Share

How Often Should a Major Car Service Be Performed?

A major car service is generally recommended every 20,000-30,000 kilometers or every two years. However, the specific interval may vary depending on the car brand, driving environment, and driving habits. Car owners should schedule major services based on their vehicle's condition. Below are the key components addressed during a major car service: 1. Oil Filter: The oil filter plays a crucial role in engine operation by trapping debris, impurities, and moisture mixed in the engine oil. During normal engine operation, friction generates particles that contaminate the oil. A malfunctioning oil filter can compromise oil cleanliness and directly affect engine lubrication, leading to abnormal wear. 2. Fuel Filter: Similar in function to the oil filter, the fuel filter ensures clean gasoline by removing impurities and moisture. This allows the engine to perform optimally and provides reliable power output. 3. Coolant: Automotive coolant serves multiple purposes, including antifreeze protection, corrosion prevention, scale inhibition, and overheating prevention. It is essential for proper engine operation in both winter and summer. During a major service, coolant levels and condition should be inspected to prevent abnormalities.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.