Where is the Luxgen 7 SUV engine number located?

3 Answers
DeElliana
07/25/25 8:36am
The Luxgen 7 SUV's engine number is stamped on the engine block, typically consisting of a 7 to 8-digit alphanumeric combination. In addition to the above method, the engine number can also be checked through the following 4 ways: The vehicle license shows the engine number, usually located on the second last line; The motor vehicle registration certificate records the engine number; The car purchase invoice states the engine number; The vehicle purchase tax payment certificate indicates the engine number. Note that the engine number is different from the engine model. The engine model refers to the specification and size of the engine within the manufacturer's system, and engine models can be identical. The engine number refers to the production serial number of the engine, where each engine can only have one unique number and no two engines share the same number.
Was this review help?
2
0
Share
AubreyRose
08/11/25 1:52pm
As a long-time owner of the Luxgen 7 SUV, having driven for over a decade, this issue isn't common but quite crucial. The engine number is typically located on the engine block itself within the engine compartment, specifically on the right side or top surface of the cylinder block, appearing as a series of stamped digits. After opening the hood, don't rush to inspect immediately as the engine might still be hot—wait about 5 minutes for safer cooling. You'll need to bend down for a close look, possibly using a flashlight for illumination or wiping off oil stains and dust with a cloth to clearly see the number. This number serves as the engine's ID proof, essential for oil changes, annual inspections, or insurance claims, so noting its location matters. I recommend owners take a photo and save it on their phones for emergencies, saving the hassle of searching each time. Additionally, Luxgen's engine design is reasonably sound—the 7 SUV delivers decent power, but long-term maintenance is key to prevent number obscurity from grime buildup.
Was this review help?
13
5
Share
Expand All
DelElena
09/27/25 7:01am
As a young guy who's driven the Big 7 for two years, I can tell you the engine number is super easy to find. Pop open the hood, and you'll spot the laser-engraved serial number on the left side of the engine block. Just take a closer look—it's right there. I actually touched it myself when replacing parts before (remember to wear gloves to avoid grease stains). The position is neither too high nor too low—just crouch down slightly. This number isn't just for show; it helps trace the engine's history, like factory modification records, so you can avoid buying a problematic vehicle. Pro tip: Clean the engine bay regularly—too much dust can obscure the number. I often swap car tips with buddies, and my advice to newbies is: Don't panic. Take it step by step—it's as simple as checking tire pressure.
Was this review help?
10
0
Share
Expand All
More Forum Discussions

Is stopping allowed during the Subject 2 driving test?

Stopping is not allowed during the Subject 2 driving test, as the grading criteria consider any mid-test stopping as a failure. Below are precautions for the Subject 2 test: Entering the waiting hall: After entering the waiting hall, candidates must observe the examination room discipline, refrain from making noise or moving around arbitrarily. If they need to leave temporarily during the waiting period, they must apply to the staff for exit registration. After getting in the car: Quickly adjust the seat and rearview mirror, fasten the seat belt, and after all preparations are complete, verify fingerprints and enter the corresponding test lane according to voice prompts. During the test: Each test item in the examination room is monitored by GPS positioning. The control line (yellow dotted line) of each item represents the test area of that item. Once the vehicle's front crosses the control line, it means entering the test for that item, and the test must be completed according to the rules of that item.
19
2
Share

How many points are deducted for the front of the car touching the line in Subject 2?

Touching the line means the vehicle body crosses the line. In the Subject 2 driving test, crossing the line with the vehicle body results in a deduction of 100 points, leading to a failure in the current test. In addition to the vehicle body crossing the line, other actions that result in a 100-point deduction include failing to park properly in reverse, stopping midway, not following the prescribed route or sequence, and exceeding the allotted time. The full score for Subject 2 is 100 points, with evaluation criteria set for failure, 20-point deductions, 10-point deductions, and 5-point deductions. The test is considered passed under the following conditions: ① For applicants of large buses, tractors, city buses, medium buses, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. Candidates who fail the Subject 2 test are allowed one on-site retake. Those who do not take the retake or fail the retake will have their current test terminated and must reschedule the test after ten days. Within the validity period of the driving skill test permit, the number of test retakes for Subject 2 and Subject 3 road driving skills must not exceed five. If the fifth retake is still unsuccessful, the results of other previously passed subjects will be invalidated.
11
0
Share

What is the maximum speed limit for electric forklifts?

Electric forklifts should not exceed a speed of 2 kilometers per hour. Below is an introduction to relevant content about maximum speed: Maximum speed testing: The maximum speed refers to the highest achievable driving speed of a vehicle under windless conditions on a level, good-quality asphalt or concrete road surface. According to Chinese regulations, the last 500 meters of a 1.6-kilometer test section are used as the testing area for maximum speed, with four round trips conducted, and the average value is taken. Maximum speed limitation: The maximum speed differs from the theoretical maximum speed (which refers to the optimal performance achieved by the engine under ideal conditions, limited to theory). For some high-performance vehicles, manufacturers often impose technical restrictions (such as electronic speed limit functions) on the vehicle's maximum speed to protect the engine or comply with traffic regulations.
10
0
Share

How many Maybach 62s are there in the world?

There are 24 Maybach 62s in the world. Here is an introduction to the Maybach: Body dimensions: The Maybach S-Class is a D-class executive sedan, with a length, width, and height of 5470mm, 1921mm, and 1510mm respectively, and a wheelbase of 3396mm. Powertrain: This car is equipped with a 3.0-liter twin-turbocharged engine, which delivers 367 horsepower and a maximum torque of 500 Nm. The engine can output maximum power at 6100 rpm and maximum torque between 1600 and 4500 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block.
6
3
Share

How Many Kilometers Can You Drive When Prompted to Replace Engine Oil Immediately?

When the vehicle displays the message "Replace Engine Oil Immediately," you can typically drive approximately 10,000 kilometers. Below are the relevant details: General Driving Conditions: This refers to frequent highway driving with minimal stop-and-go traffic. Severe Driving Conditions: If you often drive in urban areas with frequent traffic lights, congestion, and most trips being under 10 kilometers, this is considered "severe driving." Function of Engine Oil: Engine oil is to a car what blood is to the human body—the engine is the heart of the car. During engine operation, piston movement generates friction, and gasoline combustion in the cylinders can raise temperatures up to 600°C, while also producing metal particles and other waste materials from friction.
1
4
Share

Can You Continue Driving After Crossing the Stop Line Before a Red Light?

You cannot continue driving after crossing the stop line before a red light. Below is the principle of how traffic cameras capture red light violations: First photo: When the front wheels of the vehicle press over the induction loop on the ground, the camera takes the first photo of the vehicle. Second photo: When the rear wheels of the vehicle press over the induction loop on the ground, the camera takes the second photo of the vehicle. Third photo: When the vehicle passes through the intersection and presses over the induction loop on the opposite side of the road, the camera takes the third photo of the vehicle. Below is additional relevant information: Penalty: Running a red light is a violation of traffic signal rules. Motor vehicle drivers who violate traffic signal rules at intersections will face corresponding penalties. Red light violation: Generally, if you can stop the vehicle immediately after crossing the stop line, you will not be penalized for crossing the line. However, if you do not stop and continue driving forward, you will be penalized for running a red light.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.