Where is the low-pressure AC port located on the Volvo XC60?

1 Answers
DelKaden
07/29/25 10:57pm
The low-pressure AC port on the Volvo XC60 is located under the black plastic panel on the right side of the engine cover. Taking the Volvo XC60 2021 T4 Momentum Luxury Edition as an example, its body dimensions are: length 4688mm, width 1902mm, height 1658mm, wheelbase 2865mm, and trunk capacity ranging from 483 to 1410 liters. The Volvo XC60 2021 T4 Momentum Luxury Edition is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 190hp, maximum power of 140kW, maximum torque of 300Nm, and is paired with an 8-speed automatic transmission.
Was this review help?
20
2
Share
More Forum Discussions

When Did the Vehicle Purchase Tax Get Halved?

From October 1, 2015, to December 31, 2016, a preferential policy was implemented to halve the vehicle purchase tax for passenger vehicles with a displacement of 1.6 liters or below. Below is the relevant information: 1. Calculation Method: When the vehicle purchase tax was halved in 2016, the tax payable was calculated as 100,000 yuan ÷ (1 + 17%) × 5% = 4,274.50 yuan (the 100,000 yuan includes 17% VAT, and the vehicle purchase tax is calculated based on the price excluding VAT). In 2017, when the tax was reduced to 7.5% according to the "Notice," the tax payable was 100,000 yuan ÷ (1 + 17%) × 7.5% = 6,410.26 yuan. 2. Relevant Laws: In the "Notice," the Ministry of Finance clearly stipulated that the purchase date of passenger vehicles is determined based on the issuance date of valid documents such as the "Unified Invoice for Motor Vehicle Sales" or the "Special Customs Duty Payment Certificate." The vehicle purchase tax policy for new energy vehicles follows the "Announcement on Exempting New Energy Vehicles from Vehicle Purchase Tax" (Announcement No. 53 of 2014 by the Ministry of Finance, State Taxation Administration, and Ministry of Industry and Information Technology).
6
5
Share

Can You Start the Engine in P Gear?

p gear can directly start the engine. In fact, the transmission of an automatic car is not that fragile, and it can be started in either P gear or N gear. Additional information: 1. The reason for the car rolling after parking in P gear: P gear is the most common gear in automatic transmission models, usually located at the frontmost position of the gear shift console, in front of the R gear, designed to lock the axle when the car is stationary on a slope. Both P gear and N gear are neutral gears, meaning the power generated at the engine input end cannot be transmitted to the transmission output end. This is why drivers often experience a slight slide after parking in P gear on uneven surfaces. 2. Mechanical braking device: Since P gear is equipped with an additional mechanical braking device, the vehicle will no longer move once the gear grooves in the transmission are locked by the pawl. N gear itself does not have any wheel-locking mechanism, requiring the use of the handbrake or brake pedal to stop the wheels. Additionally, when in N gear, all gears in the automatic transmission can rotate freely; but when in P gear, the output gears of the transmission are locked and stationary.
2
4
Share

What Are the Types of Car Window Films?

Car window films can be categorized into dyed films, coated and composite process films, and vacuum thermal evaporation films. Below is an expanded introduction to each: 1. Dyed films: Currently, most dyed car films on the market use deep-dyeing technology, which involves adding heat-absorbing agents through deep dyeing to absorb infrared rays from sunlight and achieve heat insulation. However, since they also absorb visible light, the visible light transmittance is insufficient, and the clarity is poor due to inherent process limitations. Another major drawback of these films is that their heat insulation function degrades quickly, and they are prone to fading. They are relatively inexpensive. 2. Coated and composite process films: These films primarily serve to block intense sunlight. They were among the earliest types of car films produced and generally lack heat insulation properties. They were initially called sun paper or tea paper. 3. Vacuum thermal evaporation films: These films employ vacuum thermal evaporation technology, where an aluminum layer is evaporated onto the base material to achieve heat insulation. This is commonly referred to as the metal film category, offering relatively long-lasting heat insulation. However, the downside is lower clarity, which affects visual comfort, and another significant drawback is their high reflectivity.
20
5
Share

How many kilometers can a van run before being scrapped?

Now the mandatory scrapping policy has been abolished, which means non-commercial vehicles can be used indefinitely as long as they pass the annual inspection each year, until they fail to meet inspection standards. Below is relevant information: 1. Scrapping mileage: Generally, vans should be scrapped after reaching 600,000 kilometers, but few drivers actually reach this limit. The reason is that prolonged use leads to severe component wear, increasing the likelihood of vehicle malfunctions. Repairs become not only troublesome but also costly, making it economically unwise. 2. Relevant regulations: Vehicles can continue to be driven as long as they pass the annual inspection. The scrapping principle mainly follows "service life as primary criterion, mileage as secondary reference". Vehicles within 5 years require biennial inspections; those between 6-15 years need annual inspections; and vehicles over 15 years old require semi-annual inspections.
18
1
Share

How to Adjust the Front and Rear Position of Bus Seats?

There are usually two buttons on the armrest. Press the buttons while leaning your back backward to push the seat back and adjust the seat position. On the right side of the seat, there is a lever that can be pulled backward. Simultaneously, use your body weight to lean back gently to adjust to your most comfortable position. Lift the adjustment handle located at the lower right of the seat to release the locking mechanism, allowing the seat to move forward or backward. Once the desired position is achieved, release the handle to lock the seat in place.
9
5
Share

Where can I check the vehicle environmental protection list?

You can check it by opening the Motor Vehicle Environmental Protection Network of the Motor Vehicle Emission Monitoring Center of the Ministry of Ecology and Environment on your computer. On this website, click on Public Inquiry, select the corresponding year, and enter relevant vehicle information to query. Below is the relevant introduction to the vehicle environmental protection list: 1. The environmental protection list is actually based on the "Law of the People's Republic of China on the Prevention and Control of Atmospheric Pollution" and the relevant regulations of the Ministry of Environmental Protection. Before the product leaves the factory or the goods enter the country, the motor vehicle production and import enterprises should disclose the main environmental protection information in the form of a vehicle list; 2. Since January 1, 2017, motor vehicle production and import enterprises should disclose the environmental protection information of newly produced and imported motor vehicles on the Environmental Protection Information Platform for Motor Vehicles and Non-Road Mobile Machinery of the Ministry of Environmental Protection.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.