Where is the low beam relay for Maxus G10 located?

1 Answers
DiAdalynn
07/30/25 9:57am
The headlight relay is located in the control box near the headlights. Function: Expands the control range. When the control signal of a multi-contact relay reaches a certain value, it can simultaneously switch, disconnect, or connect multiple circuits according to different contact group configurations. It allows a very small control signal to manage high-power circuits, or when multiple control signals are input into a multi-winding relay in a specified manner, achieves predetermined control effects through comparison and synthesis. Replacement Notes: The longer the time, the higher the possibility of safety failure. Relays have a mechanical lifespan, so regular fault diagnosis of the system is necessary.
Was this review help?
15
0
Share
More Forum Discussions

Can a tire be used if the sidewall is scratched?

Tire sidewall is scratched can be used, but it is not recommended. The rubber on the sidewall of the tire is very thin and prone to blowout from the damaged area. It cannot be repaired and it is recommended to replace it. Tires are ring-shaped elastic rubber products installed on various vehicles or machinery for rolling on the ground, mounted on metal rims. The functions of tires: 1. Support the vehicle body and buffer external impacts, achieving contact with the ground and ensuring the driving performance of the vehicle; 2. During driving, they endure various deformations, load forces, and high and low temperature effects, possessing high load-bearing performance, traction performance, and cushioning performance; 3. They have high wear resistance and flex resistance, as well as low rolling resistance and heat generation.
8
0
Share

How often should the throttle body and fuel injectors be cleaned?

Under normal vehicle usage, the throttle body generally requires cleaning approximately every 20,000 kilometers. As for fuel injectors, they do not need cleaning unless there are abnormalities, or they can be cleaned every 50,000 to 80,000 kilometers. If the vehicle is used in an area with poor environmental quality and a high concentration of dust particles in the air, it is recommended to clean them about 1,000 kilometers earlier. Below are some benefits of cleaning the throttle body and fuel injectors: 1. Removes carbon deposits, improves air intake and fuel injection precision, enhances fuel efficiency, and extends engine life. 2. The engine runs more smoothly, fuel consumption decreases, and exhaust emissions are reduced.
8
2
Share

Is the spare tire the same as the original tire?

Spare tires are not the same as original tires. The differences between spare tires and original tires are as follows: The diameter and width of a car's spare tire are slightly smaller than those of the original tire, and most spare tires are not full-size tires. Prolonged use can affect driving safety. Original tires are perfectly matched to the vehicle and are suitable for long-distance driving. Precautions for using spare tires: 1. Adjust the tire pressure when using a spare tire; 2. Spare tires should not be used for an extended period; 3. Spare tires should not be involved in tire rotation; 4. The lifespan of a spare tire is about 4 years; 5. Regularly inspect the spare tire. Additionally, oil products should not be stored together with spare tires. The main component of tires is rubber, which can easily be eroded when mixed with oil products. If oil comes into contact with the tire, it should be rinsed off promptly.
11
1
Share

How to Remove the Rear Seat Cushion in a Car?

Method for removing the rear seat cushion: On both sides of the rear seat near the windows, there are pull handles. Pull these handles to fold the backrest of the rear seat forward. For the cushion part of the rear seat, in most cases, you can push the cushion towards the rear of the car and then lift it upwards. Below is a related introduction on how to lift the rear seat: 1. Under the headrests on both sides of the rear seat, there is a switch. Press it and push forward. 2. The backrest can be folded. Open the trunk, and under the seat (if not visible, it might be pressed under the seat), there is a black strap. Pull it backward and lift the seat upwards. 3. Hook the strap onto the headrest of the front seat, and adjust the tightness of the strap.
9
1
Share

Do You Need to Turn on AC for Heating?

Heating does not require turning on the AC; the AC is only needed for cooling. Here are some details: 1. The AC button activates the compressor, which is used when you need cooling. The compressor is the most fuel-consuming component of the air conditioning system. 2. The heating function of the air conditioner does not require the compressor to work. The car can be warmed up entirely by utilizing the residual heat generated by the engine. Below are the steps to turn on the car's heating system: (1) After starting the car, wait approximately 8-15 minutes until the water temperature rises to the normal operating temperature (when the temperature gauge reaches the middle). (2) Adjust the air conditioning circulation mode to internal circulation. (3) Switch to the heating mode. Some cars indicate this with a red zone, while others use a sun symbol. (4) Do not turn on the AC switch, as the heating system uses the car's own heat cycle to save energy. (5) Adjust the air conditioning to a suitable setting and direct the airflow to distribute the heat throughout the cabin.
7
4
Share

How Many Spark Plugs Should Be Replaced at Once?

Replace as many spark plugs as the number of cylinders in the car. Each cylinder has one spark plug, so a 3-cylinder car requires 3 spark plugs, a 4-cylinder car requires 4, and a 6-cylinder car requires 6. Spark plug replacement process: Open the hood, remove the engine's plastic cover, detach the high-voltage ignition wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for external debris like leaves or dust and ensure they are thoroughly cleaned. Insert the new spark plugs into the spark plug holes, hand-tighten them a few turns, and then use the socket to tighten them further. Reinstall the high-voltage ignition wires in the firing order and reattach the cover. Spark plug replacement interval: Under normal maintenance conditions, replace spark plugs every 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it's best to follow the owner's manual. Here are some general guidelines: platinum spark plugs should be replaced at 40,000 km, standard nickel alloy spark plugs at 20,000 km, and iridium spark plugs at 60,000 to 80,000 km.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.