···
Log in / Register

Where is the location for driver's license renewal in Xuhui District, Shanghai?

3 Answers
LeKinsley
07/29/25 11:03pm
Shanghai Xuhui District driver's license renewal location is at 2138 Longwu Road. Below is more information about driver's licenses: 1. Application age: Drivers applying for low-speed trucks, tricycles, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, or wheeled self-propelled machinery must be between 18 and 60 years old. 2. License renewal: Current holders of a Class C license (for small cars) who are 21 years or older can apply to upgrade to a medium passenger vehicle (Class B1 license). They can also apply for small and micro passenger vehicles, light and micro trucks, and light, small, and micro special operation vehicles (Class C1 license); or apply for small and micro automatic transmission passenger vehicles and light and micro automatic transmission trucks (Class C2 license).
Was this review help?
13
1
Share
LaVera
08/16/25 12:57am
I recently renewed my driver's license at the Xuhui Branch of the Vehicle Management Office under the Traffic Police Corps of Shanghai Public Security Bureau, located at No. 280 Jialing Road, Xuhui District. The location is convenient, just a few minutes' walk from Caobeijing Development Zone Station on Metro Line 9. Remember to bring your original ID card, original driver's license, and several one-inch white background photos, or you'll make a wasted trip. The queues can be long, so it's best to arrive early when they open to avoid crowds. The process involves getting a number, filling out forms, a medical check-up (the vision test is simple—just wear your glasses if needed), then paying fees and receiving your new license. The whole process takes about half an hour to an hour, longer if it's busy. Don’t forget to check if your old license is about to expire; handling it a few days early avoids last-minute stress and potential fines. Additionally, this office can also handle traffic violations or license plate replacements, making it a convenient one-stop shop.
Was this review help?
17
3
Share
Expand All
StBrandon
10/18/25 6:28am
I think the most reliable place to renew your driver's license in Xuhui District is the Xuhui Branch of the Vehicle Management Office under the Traffic Police Corps, located at No. 280 Jialing Road, Xuhui District. If you're driving there yourself, simply navigate to that address or use mobile apps like 'Traffic Management 12123' to check the route. Parking spaces are relatively ample, but it's better to arrive early to secure one. Online appointment is quite convenient—just visit the official website to select a time slot and avoid long queues. Required documents include your ID card, driver's license, and photos—none of these can be omitted. During the process, they'll conduct a brief medical check-up, including a simple vision test, which is nothing difficult. Weekdays are generally less crowded than weekends, making the process more efficient. After receiving your new license, double-check the information to avoid errors and future hassles. There's also a nearby café where you can relax and unwind after completing the procedure.
Was this review help?
20
4
Share
Expand All
More Forum Discussions

Is it okay if the car scraped the chassis?

If the car scraped the chassis without any fluid leakage or mechanical deformation, it should be fine. The function of the chassis is to support and install the car engine and its various components and assemblies, forming the body shape, receiving the power from the engine to make the car move and maintain normal driving. The composition of the car chassis: it consists of the transmission system, steering system, driving system, and braking system. The maintenance methods for the car chassis are: 1. Check the oil condition of each important assembly in time; 2. Pay attention to the wear of brake pads and clutch plates; 3. Regularly perform four-wheel alignment; 4. Pay attention to the tire pressure and wear condition.
8
5
Share

How to Replace a Faulty Spark Plug?

To replace a faulty spark plug, follow these steps: 1. Wait for the engine to cool completely, open the hood, unplug the high-voltage pack connector, and remove the fixing bolts; 2. Use a socket wrench to loosen the nuts by turning counterclockwise; 3. Use a magnetic rod to extract the spark plug; 4. Attach the new spark plug to the magnetic rod and insert it into the hole; 5. Reassemble by following the above steps in reverse order; 6. Start the engine to check if the spark plug is functioning properly. The reasons for a faulty spark plug include: 1. Insufficient spark energy during ignition; 2. Excessive air-fuel ratio in the fuel mixture; 3. Overheating of the engine; 4. Dirty air filter; 5. Excessive idle speed; 6. Severe carbon buildup and use of low-quality gasoline; 7. Damaged valve oil seal or crankcase ventilation valve.
4
4
Share

Why is it difficult to engage reverse gear in a manual transmission?

The reasons why it is difficult to engage reverse gear in a manual transmission are: 1. The gear is not engaged and is in neutral; 2. The gear switch of the transmission is faulty; 3. The clutch is not fully depressed; 4. The synchronizer is not installed, causing the teeth to misalign with the gear; 5. The handbrake is not released, leaving the car in manual braking state. The steps to start a manual transmission car are: 1. After starting the car, press the clutch pedal all the way down with your left foot to completely disengage the clutch; 2. Shift the transmission into first gear; 3. Press or lift the electronic handbrake button; 4. Ensure safety by observing the road and other vehicles or pedestrians; 5. Continue to hold the clutch pedal with your left foot to keep the clutch disengaged, press the accelerator pedal with your right foot, and slowly release the clutch pedal with your left foot.
14
5
Share

What is the Volkswagen Teramont 330TSI?

Volkswagen Teramont 330TSI is the Volkswagen Touareg 330TSI model. Here are the specific details about the Volkswagen Touareg: 1. Powertrain: The Touareg is equipped with three powertrain options, including a 2.0T high/low-power version and a 2.5T V6 engine. The Touareg 330TSI model features a 2.0T engine with a maximum power output of 186 horsepower and a maximum torque of 320 Nm, paired with a 7-speed dual-clutch transmission. The power of the 330TSI model can meet the basic needs of daily driving. 2. Features: The vehicle comes with a multimedia information display that supports the App-Connect smartphone integration platform, compatible with Apple CarPlay and Android Auto. It also includes adaptive cruise control, lane keeping assist, blind spot monitoring, collision warning, heated steering wheel, front seat heating/ventilation, and a panoramic sunroof.
19
3
Share

What Causes the Jerking Sensation When Releasing the Clutch After Shifting Gears?

The reasons for experiencing a jerking sensation when releasing the clutch after shifting gears are: 1. Jerking during upshifting: The transmission's response speed is not fast enough, and the upshift speed cannot keep up with the driver's throttle input, resulting in a jerking sensation during gear changes. 2. Jerking during downshifting: When the driver releases the accelerator pedal or presses the brake pedal, the alternator starts working, placing a load on the engine and causing a mismatch between the engine speed and the clutch disc speed, leading to a jerking sensation. The working principle of the clutch is: 1. The torque generated by the engine is transmitted to the driven disc through the friction between the flywheel, pressure plate, and the contact surface of the driven disc. 2. When the driver depresses the clutch pedal, the diaphragm spring's large end moves the pressure plate backward through mechanical linkage, separating the driven components from the driving components.
20
4
Share

How to Turn Off a Motorcycle Alarm?

There are several methods to turn off a motorcycle alarm: you can directly use the key to turn on the power switch, which will deactivate the alarm state. When the key is not available, simply unplug the power connector and then plug it back in to deactivate the alarm state. Below is additional information about power locks: 1. By voltage: Power locks can be categorized into low-voltage power locks and high-voltage power locks based on voltage levels. Low-voltage power locks are mainly used in small appliances, electric toys, and electric vehicles. High-voltage power locks are primarily used in machine tools, elevators, etc. 2. By the number of controlled circuits: Power locks can be divided into single-circuit power locks, dual-circuit power locks, and multi-circuit power locks. A single-circuit power lock can only control one circuit. A dual-circuit power lock can simultaneously control two circuits.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.