Where is the location for driver's license renewal in Baoshan District?

1 Answers
McSadie
07/30/25 3:07am
Driver's license renewal in Baoshan District is processed at the Traffic Police Brigade of Baoshan Public Security Sub-Bureau. Below are the specific details: 1. Motor Vehicle Driver's License Application Form: Available at various vehicle management offices, driver management windows of district (county) traffic police branches, driving schools, and designated digital photo spots for driver's licenses. 2. Driver's Physical Condition Certificate: Issued by medical institutions in Shanghai that are certified by the municipal health authorities to conduct physical examinations for drivers. These institutions include hospitals at or above the district (county) level in Shanghai, health examination stations under the Shanghai Center for Disease Control and Prevention, and military medical institutions at or above the regimental level stationed in Shanghai. For applicants applying for a driver's license for small automatic transmission passenger vehicles designed for the disabled, the certificate must be issued by specialized medical institutions designated by the Shanghai health authorities. 3. Required documents: The driver's identity proof and its photocopy; the original driver's license; and a photo for the driver's license.
Was this review help?
14
5
Share
More Forum Discussions

How Many Liters of Fuel Can the Haval Chulian Hold?

Haval Chulian uses 92-octane gasoline, with a fuel tank capacity of 55 liters. A full tank can typically run for about 800 kilometers. The Ministry of Industry and Information Technology's combined fuel consumption is approximately 6.4 liters per 100 kilometers. The Haval Chulian is the third model under Great Wall Motors' Lemon Platform and is Great Wall's first entry-level compact SUV. Vehicle Dimensions: Haval Chulian: The body dimensions are 4477×1874×1626 mm, with a wheelbase of 2700 mm. It is equipped with a 1.5T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum horsepower of 150 PS and a maximum torque of 200 Nm. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is usually done by observing the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments. It is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the calibrated volume. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safety limit, and there is additional space from the safety limit to the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is added up to the tank opening during refueling, the actual fuel volume may exceed the calibrated tank capacity. Vehicle fuel consumption is directly influenced by five major factors: driving habits, the vehicle itself, road conditions, natural wind, and environmental temperature. Specific factors that increase fuel consumption include: Driving Habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before stopping at a red light, can increase fuel consumption. The Vehicle Itself: Vehicles with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements typically require more power and thus more gasoline for combustion. Heavier vehicles also consume more fuel due to the greater driving torque needed. Road Conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural Wind: Driving against the wind or on windy days increases vehicle resistance and fuel consumption. Low Environmental Temperature: When the engine block is cold, the injected gasoline does not atomize easily during a cold start, requiring more gasoline for combustion and thus increasing fuel consumption. Additionally, lower temperatures prompt the engine's computer to use higher RPMs to warm up the engine, further increasing fuel consumption.
5
5
Share

How to adjust the time on the 2015 CRV?

To adjust the time on the 2015 CRV, follow these steps: 1. After turning on the ignition, the CLK button displays and sets the time. 2. Press and hold the CLK button for about 5 seconds until the time display starts flashing. Use the adjustment buttons (turn left to decrease, turn right to increase). 3. 'H' is used to adjust the hour, and 'M' is used to adjust the minutes. 4. After adjusting the time, press the CLK button again. If no action is taken for a few seconds, the adjustment mode will exit automatically. Here is an introduction to the 2015 CRV: The Dongfeng Honda CRV was one of the earliest Japanese-brand urban SUVs to enter the Chinese market and be locally produced. The Dongfeng Honda CRV has a body length of nearly 4.6 meters and a wheelbase of 2.66 meters. It offers a spacious and comfortable interior, making it highly practical! The exterior design is both elegant and stylish. The chassis is robust and comfortable, providing a high-quality driving experience! Apart from the engine, overall, this is an excellent model.
3
1
Share

Where is the passenger side airbag located in a car?

The passenger side airbag in a car is located in front of the passenger seat, typically above the glove compartment on the dashboard, serving as a passive safety feature. In the event of an accident, the airbag effectively protects the heads and chests of both the driver and the passenger. This is because a severe frontal collision can cause significant deformation of the vehicle's front, and the occupants inside may be thrown forward due to the strong inertia, leading to impacts with interior components. Airbags do not deploy in every collision; if the impact is minor and does not trigger the airbag sensor, the airbag will not activate. Therefore, it is crucial to follow traffic rules during daily driving to avoid accidents. The working principle of airbags: When a collision occurs while driving, the airbag sensor first receives the impact signal. If the impact reaches the specified intensity, the sensor activates and sends a signal to the electronic control unit (ECU). The ECU compares the received signal with its stored data. If the conditions for airbag deployment are met, the ECU sends a trigger signal to the gas generator in the airbag module. Upon receiving the signal, the gas generator ignites the propellant, producing a large volume of gas. This gas is filtered and cooled before entering the airbag, causing it to rapidly inflate and break through the padding in a fraction of a second. The airbag forms an elastic cushion in front of the driver or passenger, then deflates and contracts to absorb the impact energy, effectively protecting the head and chest from or reducing the severity of injuries. Important precautions regarding airbags: Always use seat belts: From a design perspective, seat belts not only provide protection but also control the speed of the occupant's body during the initial phase of a collision. This ensures the occupant contacts the airbag at the right moment and position, minimizing the impact force. If the occupant is not wearing a seat belt, they experience little restraint in the early stages of the collision, leading to minimal deceleration and premature contact with the airbag before it fully inflates. The rapid inflation speed and uneven pressure of the airbag at this stage could cause harm. Avoid placing objects near airbags: Airbags deploy with tremendous force, reaching speeds of 250-350 km/h and exerting an impact force of 150-200 kg. Any objects placed near the airbag could be ejected, causing secondary injuries. Therefore, do not place any items in front of or near the airbag. Avoid accidental impacts and modifications: Avoid forcefully hitting or shaking the airbag sensor, as this could cause unintended deployment. Additionally, during modifications, be cautious not to alter the airbag system wiring, which could render the airbag ineffective. Installing seat covers may also interfere with the proper deployment of side airbags. Adjust seating and posture: The danger zone for the driver's airbag is within 5-8 cm in front of the inflation system. Maintaining a distance of 25 cm from the steering wheel center to the sternum ensures safety. Given that airbags inflate at speeds up to 320 km/h, incorrect seating posture during a collision can result in severe injuries. Do not let children sit in the front passenger seat: While airbags and three-point seat belts offer optimal protection for adults, they can be hazardous for children. During a collision, the seat belt's tension could cause chest fractures in children, and the deploying airbag might lead to suffocation. Airbags have an expiration date: Due to manufacturers' technical secrecy and the lack of standardized regulations, many assume airbags last as long as the vehicle. However, airbag quality may deteriorate after 8-10 years. It is recommended to perform maintenance every 10,000-20,000 km. If the airbag warning light remains on or flashes 6-8 seconds after starting the vehicle, seek immediate inspection at a 4S shop.
7
5
Share

What Causes Odors Inside Tesla Vehicles?

Tesla vehicle odors are caused by interior material issues. Here are specific methods to eliminate odors: 1. Simple ventilation: When windows are closed, the confined space allows odors to concentrate to saturation levels. Opening windows for airflow is a simple yet effective solution. 2. Essential oil aromatherapy: Plant-based essential oils can quickly neutralize odors. 3. Fruit/plant deodorizers: Fruits like grapefruit, pineapple, and oranges not only have strong absorption capabilities but also emit pleasant fragrances, improving cabin air quality while eliminating odors.
12
1
Share

What engine does the Ford Edge use?

Ford Edge is equipped with a 2.0-liter four-cylinder turbocharged engine across the entire lineup, delivering a maximum horsepower of 245ps, a maximum power of 180kw, and a peak torque of 390nm. This engine offers robust performance that can meet the power demands of most drivers. The Ford Edge is a mid-size SUV produced by Changan Ford, measuring 4878mm in length, 1925mm in width, and 1734mm in height. Paired with an 8-speed automatic transmission, this 2.0-liter turbocharged engine provides excellent performance in both power delivery and fuel efficiency.
1
4
Share

Where is the VIN located on a Ford Explorer?

Ford Explorer's VIN is located on the frame rail under the passenger seat, which requires crouching down to see. The vehicle identification number consists of 17 digits, with each car having a unique VIN that reflects the vehicle's country of manufacture, performance characteristics, etc. The commonly used North American standard is relatively strict and also compatible with the EU's ISO3799 standard. The Ford Explorer is an SUV launched by Ford Motor Company, representing modern American SUV design style. It features generous body dimensions, combining flexible and smooth body lines with muscular contours to present a highly sporty appearance while delivering superior aerodynamic performance.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.