Where is the location for adding coolant and windshield washer fluid in Geely Binyue?
1 Answers
Geely Binyue's coolant and windshield washer fluid filling ports are located in the engine compartment. Coolant replacement method: Before completely replacing the coolant, conduct a thorough inspection first to check for any signs of leakage or cracks in the pipelines, with special attention to the five-way water pipe. The five-way pipe is named for its five connections to various parts, as the coolant flows through it before being distributed to different sections of the car to function. If there is any coolant leakage in this part, replace the water pipe or re-secure the connection as needed. Drain the old coolant, then flush the liquid channels with clean water. Add clean water to the coolant reservoir, then continue adding water to the reservoir so that it continuously flows through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water flowing out of the reservoir will have a faint pink color. Continue adding clean water until clear water flows out. Note: Remember to remove the heater hose and drain the water from the heater core. About 1 hour after draining, add the new coolant through the radiator hose to allow it to flow quickly into the radiator. Then add another container of coolant to the coolant reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. As some air is expelled from the cooling system, the fluid level will drop slightly. Add more coolant until it reaches the "MAXT" mark on the reservoir.
