Where is the light switch of Borgward BX5?

3 Answers
LaNolan
07/30/25 12:49am
The headlight switch of Borgward BX5 is located on the lever-type switch on the left side of the steering wheel. When there is no street light or the road is straight with poor visibility, you can use the high beam. Taking the 2020 Borgward BX5 as an example, it belongs to the compact SUV category, with body dimensions of: length 4490mm, width 1877mm, height 1675mm, wheelbase 2685mm, and fuel tank capacity 60l. The 2020 Borgward BX5 is equipped with a 2.0l turbocharged engine, with a maximum horsepower of 150ps, maximum power of 110kw, maximum torque of 250nm, matched with a 6-speed automatic manual transmission, front suspension is MacPherson independent suspension, and rear suspension is multi-link independent suspension.
Was this review help?
17
4
Share
SanElliot
08/15/25 6:09am
The light switch of the Borgward BX5 is on the left lever next to the steering wheel. A gentle turn controls the high/low beams and position lights, and it even has an auto mode for extra convenience. As a veteran driver who has driven over a dozen car models, I must say this placement is very ergonomic—operating it with the left hand while driving with the right minimizes distraction, ensuring safety and ease. I remember once driving on a mountain road at night when the lights flickered unexpectedly. A quick adjustment on the lever got me out of trouble smoothly—had the switch been hard to locate, it could’ve been dangerous. I advise new owners to familiarize themselves with this switch before driving and check the lights when it gets dark. Make it a habit to inspect regularly—for instance, if a light fails, don’t rush to replace the bulb; check the fuse first to avoid turning a minor issue into a major one. The switch’s side-of-steering-wheel position makes it easy to find; don’t worry about fumbling in the dark—just pull over and use the interior light if needed. Safety comes first when driving, and switch placement is a critical detail.
Was this review help?
12
0
Share
Expand All
LeilaMarie
10/20/25 3:32am
Hey, driving the Borgward BX5 is really cool. The light switch is right on the stalk to the left of the steering wheel—just flip it and the lights come on, super easy and convenient. I love this design for my daily commute; no need to fumble around and get distracted, especially when cruising at night with music on. The auto mode is so smart—it turns the lights on automatically when it gets dark, saving a lot of hassle. New drivers should take some time during the day to get familiar with the switch's position, so they don't end up pressing random buttons in the dark and disrupt their driving. The lights also have high-beam and low-beam modes, which are more than enough for daily use. Here's a little tip: if the switch ever feels stuck, don't force it to avoid damaging the parts and ending up with unnecessary repair bills. Overall, the position is well-separated from the audio controls, so it doesn't mess with the vibe. Drive long enough, and you'll naturally appreciate how thoughtful this design is. Stay safe and don't ignore learning the light switch while staring at your phone.
Was this review help?
14
0
Share
Expand All
More Forum Discussions

What causes the intermittent cooling and heating of the BYD e5 air conditioning?

Here are the reasons for the intermittent cooling and heating of the BYD e5 air conditioning: 1. Loose compressor wiring: When the air conditioning is first turned on, the compressor starts working, compressing the gaseous refrigerant in the system into a high-temperature, high-pressure gas, which is then sent to the condenser for cooling. After cooling, it becomes a high-temperature, high-pressure liquid, passing through the dryer for drying and filtration, then through the expansion valve and evaporator, before returning to the compressor. 2. Poor contact of the pressure switch: When the high-temperature, high-pressure liquid passes through the expansion valve, all the liquid expands and undergoes a drastic change, turning into a low-temperature, low-pressure liquid. This low-temperature, low-pressure liquid causes the temperature of the evaporator to drop rapidly, so the air blown by the air conditioning motor becomes cold after passing through the evaporator. 3. Compressor clutch failure: When the temperature gradually rises above 0 degrees, the ice blockage in the pipeline begins to slowly melt, and part of the pipeline resumes refrigerant circulation, restoring the cooling effect. This leads to the next cycle of ice blockage, resulting in the phenomenon where the air conditioning blows cold air when first turned on but soon turns into hot air.
18
0
Share

Which driving mode is commonly used for the BMW 530?

Here is an introduction to the driving modes of the BMW 530: 1. Eco Mode (ECO): Achieves fuel efficiency by adjusting shift logic and limiting fuel injection. In this mode, even if the driver floors the accelerator, the vehicle won't surge forward aggressively, feeling somewhat sluggish. 2. Sport Mode: Delays upshifting to provide high torque output from the start. It keeps the engine at higher RPMs, maintaining a very aggressive driving state. With enhanced power, the vehicle delivers a stronger sense of acceleration. However, the increased power inevitably leads to higher fuel consumption and greater wear on the transmission and engine. That said, occasional 'spirited' driving can help clear carbon deposits in the engine. 3. Comfort Mode: The suspension becomes softer, the steering is easier to handle, and the body sits lower. Whether going over speed bumps, braking in emergencies, or accelerating, the ride is more comfortable than usual. Power output is smoother and less abrupt.
15
0
Share

What is the emission standard for National IV?

National IV is the fourth stage of China's vehicle emission standards. Below are the relevant details: National IV Standard: The National IV standard is the fourth stage of China's motor vehicle pollutant emission standards. The main pollutants emitted by vehicles include HC (hydrocarbons), NOx (nitrogen oxides), CO (carbon monoxide), and PM (particulate matter). The standard controls and reduces vehicle emissions to below specified levels through the application of technologies such as improved catalytic converter active layers, secondary air injection, and exhaust gas recirculation systems with cooling devices. Vehicle Emission Standards: Vehicle emission standards are established to control the emission of pollutants from vehicles. To curb the generation of these harmful gases and encourage automobile manufacturers to improve their products to reduce the sources of these pollutants, both Europe and the United States have formulated relevant vehicle emission standards. These standards are continuously supplemented, refined, and tightened as vehicle ownership increases and environmental conditions worsen. The European standards serve as a reference for China's vehicle emission standards, and currently, new domestically produced vehicles will indicate the European emission standard that the engine's exhaust emissions meet.
16
5
Share

What does it mean when the Audi A3 displays 'braking force limited' during ignition?

It indicates a malfunction in the vehicle's braking system. Common faults include brake failure, brake deviation, and brake non-return. These three types of faults can damage the vehicle in minor cases and affect driving safety in severe cases, requiring prompt attention. Below are relevant explanations: 1. Brake Booster: The brake booster is a widely used braking assistance device in vehicles ranging from light to medium-duty, which can be broadly categorized into vacuum assist, hydraulic assist, and pneumatic assist. It includes components such as a hydraulic cylinder, support arm, pressure arm, and brake plate, characterized by hydraulic rods at both ends of the hydraulic cylinder connecting to the support arm and pressure arm, with a rubber-wheeled brake plate mounted on the pressure arm. 2. Principle: The brake booster utilizes the vacuum generated in the intake manifold when the engine is running to assist braking. The booster is typically a cylindrical unit approximately 20cm in diameter and 15cm in height. Inside the cylinder, there is a diaphragm with a push rod in the middle, dividing the cavity into two parts. One part is connected to the engine intake manifold via a pipeline, while the other part is exposed to the atmosphere when the brake pedal is depressed. The pressure difference between the two sides provides assistance for braking.
10
0
Share

Where is the Mercedes-Benz engine 264920 produced?

Mercedes-Benz model 264920 engine is produced at the Mercedes-Benz main plant in Sindelfingen, Germany. The following is an introduction to the Mercedes-Benz engine related content: 1. Engine model: The Mercedes-Benz E300 uses a low-power version of the 2.0-liter turbocharged engine, the code of this engine is 264920. The Mercedes-Benz E-Class is a mid-size luxury sedan under the Mercedes-Benz brand, this model has been domestically produced. The domestic version of the model uses three engines in total, which are a 1.5-liter turbocharged engine, a low-power version of the 2.0-liter turbocharged engine, and a high-power version of the 2.0-liter turbocharged engine. 2. Engine power: The 1.5-liter turbocharged engine has a maximum torque of 184 horsepower and 280 Nm, this engine can output maximum power at 6100 rpm, and can output maximum torque at 3000 to 4000 rpm. This engine is equipped with a 48V mild hybrid system and direct fuel injection technology.
20
5
Share

What is the reason why the AC switch of Audi Q3 turns off when released?

Air conditioning AC switch itself is damaged (integrated with the control panel), replace the new switch to solve the problem. The following is the relevant introduction: 1. Car air conditioning: Car air conditioning device (air-conditioning-device) referred to as car air conditioning. It is used to adjust and control the temperature, humidity, air cleanliness and air flow in the car compartment to the best state, providing a comfortable riding environment for passengers and reducing travel fatigue; creating good working conditions for the driver, playing an important role in ensuring safe driving ventilation device. It generally includes refrigeration devices, heating devices and ventilation devices. This combined device makes full use of the limited space inside the car, has a simple structure and is easy to operate, and is an internationally popular modern car air conditioning system. 2. AC button: The A/C button controls the switch of the air conditioning compressor. That is, in summer, when the owner turns on the cold air, the A/C button needs to be turned on at the same time, so that the air conditioner will cool, and the cold air will be sent into the car, realizing the cold cycle in the car.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.