Where is the Lifan 320 cabin air filter located?
3 Answers
The Lifan 320 cabin air filter is installed inside the glove compartment on the passenger side, which can be accessed by opening the glove box. Replacement method for Lifan 320 cabin air filter: 1. First, open the glove box cover and locate the fixing buckle on the right side of the glove box, then pull it outward firmly. 2. Remove the fixing buckle of the glove box cover to detach it, then squeeze both sides of the glove box towards the center with both hands to remove it. 3. After removing the glove box, you will see the cabin air filter cover. Press firmly on the fixing buckles on both sides of the cover to remove it, then pull out the old cabin air filter. 4. Install the new cabin air filter and reassemble everything in reverse order of the disassembly process (pay attention to the installation direction of the cabin air filter). 5. Generally, for urban household cars, the cabin air filter should be replaced every six months or once a year.
I've been driving the Lifan 320 for several years, and the cabin air filter is usually located in the area below the windshield on the passenger side, specifically hidden in the air intake system behind the glove box. To find it, you'll need to open the glove box first, where there's a plastic cover or panel—unscrewing it will reveal the filter. The position isn't particularly hidden, but it might take some trial and error for first-timers. Replacing it yourself is actually quite simple and can be done in about ten minutes with just a screwdriver and a flashlight. The filter's main function is to trap pollen, dust, and similar particles. It should be replaced every 12 months or around 15,000 kilometers; otherwise, the AC may blow out musty air, which could affect health. When replacing, be careful not to lose small parts. OEM filters fit better, aren't expensive, and can save you labor costs at repair shops.
As someone who frequently works on vehicles, let me tell you that the Lifan 320's cabin air filter is mostly located in the air intake box, typically positioned below the windshield in front of the passenger seat. Access it through the glove compartment area by removing a few plastic clips or a small panel to directly reach the filter. The design considers some user-friendliness, but be mindful of screw tightness—too tight may break it, too loose could cause air leaks. It's advisable to turn off the AC and engine before replacing the filter to prevent dust from being sucked into the system and causing damage. Avoid low-quality filters as they can reduce cooling efficiency. Check the filter's condition annually to ensure fresh air inside the car. This task isn't overly complicated; even beginners can learn it with some time, and having the right tools makes it smoother.