Where is the license plate 'Zhe W' from?

Which production year does the chassis number 'f' indicate?

Chassis number 'f' indicates production in 2016. The 10th digit of the VIN code represents the production year. If owners want to know their vehicle's production year, they can check the identification plate on the B-pillar or the plate in the engine compartment - both plates display the production date, which can be accurate to the month. Besides the production year, the VIN code contains other important information such as body type, engine type, and production region. The VIN serves as a vehicle's ID number and cannot be altered. Many car components bear production dates, including seat belts, headlights, radiators, radiator frames, tires, and glass. All parts' production dates should precede the vehicle's assembly date.

4

5

Share

What to Do When an Automatic Transmission Car Has a Dead Battery?

Solutions for an automatic transmission car with a dead battery: Use an external power source or replace the battery to start the car. The external power source can be a jump-start from another functioning vehicle or an emergency jump starter. Unlike manual transmission cars, automatic transmission cars cannot be push-started when the battery is dead, as this can cause significant damage to the vehicle. Steps to jump-start an automatic transmission car: 1. First, prepare two battery cables and position the two cars as close as possible, facing each other head-on. 2. The assisting vehicle should turn off all ignition switches, lights, and electrical loads, and engage the parking brakes for both vehicles. The automatic transmission car should be in 'P' (Park) mode. 3. Locate the batteries in both cars and identify the positive and negative terminals. 4. Remove the terminal covers, attach the red battery cable clamp to the positive terminal first, then the black clamp to the negative terminal. After connecting all four terminals, start the car with the dead battery.

20

5

Share

What does ECO mean?

ECO refers to the vehicle's economical driving mode, also known as the economy mode. When driving frequently in congested urban road conditions, activating the ECO mode can significantly improve fuel efficiency. Under ECO mode operation, the carbon deposits in the engine are roughly similar to those produced under normal operating conditions. The main principle of ECO mode is not complicated. It primarily involves comprehensive judgment and analysis of various factors affecting fuel consumption during vehicle movement, such as automatic transmission gear position, engine speed, vehicle speed, braking, and transmission oil temperature. The ECU control unit calculates the appropriate amount of fuel to supply the engine for operation, effectively reducing fuel consumption compared to normal driving modes. Simply put, it controls the engine's speed with reasonable gear selection to minimize unnecessary fuel consumption. ECO is an abbreviation, with its Chinese translation representing Ecology (environmental protection), Conservation (energy saving), and Optimization (power). ECO mode is further divided into active ECO driving mode and passive ECO driving mode. When the ECO indicator light on the dashboard illuminates, it indicates that the vehicle's economy mode has been activated. ECO mode is categorized into active and passive types. The difference lies in the fact that the active type has a dedicated button, allowing the driver to choose whether to activate it. When the driver presses the ECO mode switch, the dashboard indicator light immediately illuminates, and the vehicle automatically begins adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. The passive ECO mode does not have a dedicated button. When the ECO indicator light on the dashboard illuminates, it serves merely as a reminder function. ECO automatically evaluates your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the ECO indicator light. Most vehicles adopt the active ECO driving mode, meaning they have a dedicated switch button. Therefore, ECO mode can be activated during daily driving. However, it is unnecessary to activate ECO mode when driving at speeds exceeding 120 km/h, during idle parking, in N/P gear, or in manual mode, especially when climbing hills. Doing so would not only fail to demonstrate the fuel-saving characteristics of ECO but also affect the vehicle's power. Additionally, ECO mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 kilometers per hour, the vehicle prioritizes speed, causing the ECO mode to automatically deactivate. During idle parking or in N/P gear and manual mode, ECO may also become ineffective. When high torque output is required, such as when climbing hills, the engine's computer prioritizes ensuring sufficient power to drive the vehicle, and the ECO mode will not function.

6

2

Share

Can a Slipping Car Clutch Plate Be Adjusted?

Car clutch plate slipping can be adjusted depending on the severity of the slippage. If the slippage is not severe, adjusting the pedal travel can resolve the slipping caused by incomplete clutch disengagement. However, if the slippage is severe, nearing the exposure of rivets, it cannot be adjusted, and the friction plate must be replaced to fix the issue. Clutch slipping refers to a condition where, during normal operation with the clutch pedal fully released and the drivetrain not overloaded, the clutch is engaged but the driving and driven plates fail to achieve equal speed, indicating relative sliding, and the engine's power cannot be fully transmitted.

15

3

Share

Why does the car always fail to start?

The reasons why the car always fails to start: 1. The battery is low on power. When the battery voltage is below the rated value and the engine cannot operate normally, please immediately call the service station for rescue, or get a jump start from another vehicle, and then you must go to the service station to charge the battery; 2. Gasoline flow is blocked. Do not wait until the gasoline is almost burned out before refueling. Place the car in a warm environment, or use the method of cleaning the fuel system to completely solve the problem; 3. The ignition system is not working well. You can unscrew the spark plug and wipe off the oil stains between the electrodes, and then reassemble it to drive. It should be noted that if an automatic transmission car fails to start, you cannot try to push the car to start it like a manual transmission car, as this will cause relatively large damage to the car. It is recommended to pull over, first simply check whether it is caused by no fuel or no power, and you can contact the nearest 4S store or seek towing services.

2

0

Share

How to Stop the Wiper in the Middle?

Method to stop the wiper in the middle: 1. First, power on the car and activate the wiper function, setting the wiper to any gear. 2. Watch the wiper, and when it reaches the middle position, turn the key to the OFF position. This will stop the wiper in the middle of the windshield. The wiper, also known as a windscreen wiper, is primarily used to remove raindrops and dust from the car's windshield, enhancing the driver's visibility and improving driving safety. Rear windows of hatchbacks and SUVs are also equipped with wipers. Besides cars, other vehicles like trains and trams are fitted with wipers, and even some engineering machinery, such as cranes, have wipers installed.

18

0

Share

Where is the license plate 'Zhe W' from?

Which production year does the chassis number 'f' indicate?

What to Do When an Automatic Transmission Car Has a Dead Battery?

What does ECO mean?

Can a Slipping Car Clutch Plate Be Adjusted?

Why does the car always fail to start?

How to Stop the Wiper in the Middle?

How to Distinguish Between China IV and China V?

How to Open the Trunk from Inside the Car?

What does 'a' mean in a car?

Where is the Geely Emgrand produced?