Where is the license plate with 'Xin D' from?

Should the Kia Sportage use 92 or 95 octane gasoline?

According to the official vehicle manual recommendation, the Kia Sportage should use 92 octane gasoline. In addition to checking the appropriate gasoline grade in the vehicle manual, you can also find it on the fuel tank cap, which will also be marked. Typically, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. However, with the application of some new technologies, the gasoline grade cannot be solely determined by the compression ratio. High compression ratios can also be tuned to use lower octane gasoline because, apart from the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline grade, the higher the octane number and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the Kia Sportage occasionally uses the wrong gasoline grade, simply switch back to the correct grade after consumption. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower octane gasoline, using higher octane gasoline will not cause damage, but the increase in octane number may alter the fuel's ignition point, leading to delayed combustion in the engine. This means both the engine's power output and thermal efficiency will decrease, resulting in poorer performance as experienced by the driver. For vehicles recommended to use higher octane gasoline, using lower octane gasoline can cause engine knocking. Because the octane number is significantly lower, the gasoline's ignition point decreases, causing it to ignite prematurely during the compression stroke. If the fuel ignites before the spark plug fires during the compression stroke, resistance will occur during the upward stroke. This resistance makes the engine run very unstably. If the knocking is imperceptible, it only increases noise and does not significantly damage the engine. However, if noticeable knocking occurs, it indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.

13

3

Share

Actual Fuel Consumption of Sienna 3.5 AWD?

The actual fuel consumption of Sienna 3.5 AWD is 10.6L per 100 kilometers. Below is an introduction about the Sienna: Introduction: The Toyota Sienna is a business-oriented vehicle launched by Toyota in 2011. The Toyota Sienna is divided into standard and luxury models, with the main configuration differences being the power sliding doors, roof rack, multifunction steering wheel, chrome-plated rearview mirrors, and front power seat adjustment. Exterior: In terms of overall dimensions, it surpasses previous Toyota models and is capable of competing with the Volkswagen T5 and Mercedes-Benz Vito. The wide body design is well-suited for American conditions, but extra caution is required for parking and driving in China. The oversized dimensions are the most impressive feature of the Sienna. Space: In terms of storage, the Sienna also boasts high utilization. Storage compartments and cup holders throughout the vehicle ensure that every passenger is well accommodated. This highlights Toyota's design expertise in MPV models—simply having a large space doesn't mean much; improving utilization and flexibility is crucial.

17

0

Share

How Often Should the Engine Be Cleaned?

Engine cleaning is recommended every 20,000 to 40,000 kilometers. The lubrication system cleaning service at 4S shops typically involves adding a cleaning agent through the engine oil filler port before an oil change, keeping the engine running for 5 to 10 minutes, and then draining it along with the old oil. More details about engine maintenance are as follows: 1. During engine operation, the high-temperature environment and the wear from relative movements and friction between surfaces can affect the performance and quality of the engine oil. 2. When the performance and quality of the engine oil degrade, its ability to clean the oil passages decreases, leading to sludge buildup in the engine lubrication system. In severe cases, this can even block the oil passages, which is why the engine lubrication system requires regular cleaning.

2

1

Share

What is the best engine oil for the Mazda3 Axela?

The Mazda3 Axela performs best with 5W30 or 0W30 engine oil. Here are additional details: 1. The Mazda3 Axela is equipped with two engines: a 1.5-liter naturally aspirated engine and a 2.0-liter naturally aspirated engine. 2. Engine oil is referred to as the lifeblood of the engine, serving functions such as lubrication, cleaning, sealing, heat dissipation, cushioning, and rust prevention. 3. Download the Tuhu APP, select your car model, and it will automatically recommend compatible engine oils from various brands. 4. For better fuel economy, use 0W20 oil. If you frequently drive at high RPMs or aggressively, opt for 5W30. Fully synthetic oil offers superior engine protection and longer maintenance intervals—service every 10,000 kilometers or once a year for convenience and peace of mind. Ensure the oil is genuine, the brand doesn't matter as long as the viscosity is appropriate.

11

3

Share

How to Replace the Rear Seat Buckles of the Buick Excelle?

The Buick Excelle rear seats have two buckles in total. Flip the seat backward, remove the old buckle along with any remaining metal fragments inside, take out the new buckle, insert the smaller buckle core into the larger outer buckle, and press firmly to ensure they snap tightly together. Then, align it with the buckle position on the seat and insert it. Additional Information: 1. Procedure for removing the rear seats of the Buick New Excelle: Simply lift from the bottom of both sides at the front of the seat. You will find that the seat is secured by buckles, one on each side. After removing the buckles, the rear seat can be detached. This method is applicable to almost all vehicle models. Once the seat is removed, the buckles are usually damaged and new ones should be prepared. 2. Method for folding down the rear seats of the Buick Excelle: Move the front seats forward, close the center armrest of the rear seats, retract the seatbelt buckle of the middle rear seat, adjust the headrest to its lowest position, and pull the seat folding switch located at the shoulder of the rear seat to fold it down.

1

0

Share

What is the reason for the BYD F0 gear not engaging?

BYD F0 gear not engaging is due to unclear clutch disc separation. Here are the extended details: 1. The clutch disc and clutch pressure plate are damaged. Replace the clutch friction disc with a new one. 2. Worn shift mechanism, internal gear wear of the shift lever, causing the shift lever to get stuck, making it difficult to move back and forth. 3. The BYD F0 has a wheelbase of 2340mm, with length, width, and height dimensions of 3460mm, 1618mm, and 1465mm respectively. The interior space is not as spacious as mid-size cars, but the lines extending upward from the A-pillar reach their highest point above the cockpit, maximizing the interior space.

15

2

Share

Where is the license plate with 'Xin D' from?

Should the Kia Sportage use 92 or 95 octane gasoline?

Actual Fuel Consumption of Sienna 3.5 AWD?

How Often Should the Engine Be Cleaned?

What is the best engine oil for the Mazda3 Axela?

How to Replace the Rear Seat Buckles of the Buick Excelle?

What is the reason for the BYD F0 gear not engaging?

What is the chassis structure of the Geely Xingyue L?

Is the LaCrosse Fuel-Efficient?

What is the fuel tank capacity of the Haval H6 Coupe in liters?

Can the Haval Big Dog be modified with a rear-mounted spare tire?