Where is the license plate Tong E from?

Which Button is the Hazard Warning Light Switch in a Car?

The hazard warning light switch in a car is a red triangular symbol. Below is some extended information about car hazard warning lights: 1. How to use it: Gently press the button once to activate the car's hazard warning light mode, and press it again to turn it off. 2. Button location: The hazard warning light button is generally located below the car's center console or on the center console to the right of the steering wheel. The exact position may vary slightly depending on the car model, but the differences are minimal. 3. Purpose: The hazard warning lights are signal lights on a car, primarily used to alert other vehicles and pedestrians to pay attention, indicating that the vehicle is in a special situation and prompting others to yield in time.

2

4

Share

Does the Steering Wheel Control the Front Wheels or Rear Wheels?

Except for some special vehicles, the steering wheels of ordinary cars and trucks generally control the front wheels. Here is more extended information about automotive steering wheels: 1. Method of operating the steering wheel: If the steering wheel is viewed as a clock face, the correct hand position should be the left hand holding between 9 and 10 o'clock, and the right hand holding between 3 and 4 o'clock. 2. Working principle of the steering wheel: The function of the steering wheel is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft. 3. Reason for not controlling the rear wheels: Controlling the rear wheels with the steering wheel is very unstable, especially with single rear-wheel steering, which has extremely poor stability and becomes difficult to control at high speeds.

8

2

Share

Why is the central air vent of the Leiling not blowing air?

The reasons why the central air vent of the Leiling is not blowing air are: 1. The external circulation airflow is relatively weak, while the internal circulation airflow is normal. This may be due to a clogged air filter or air duct leakage, so it is necessary to replace the air filter in time; 2. If the airflow is weak regardless of the circulation mode, it may involve internal duct detachment, requiring timely repair of the air conditioning pipeline; 3. Abnormal operation of the blower, possibly due to poor line contact, so the blower circuit and fuse should be checked promptly; 4. Improper adjustment of the air vent direction. If no air or crosswind is detected after trying all vents, the internal air duct needs to be inspected. The Leiling is a car launched by GAC Toyota. The sports version has been equipped with additional sports kits, including front and rear aerodynamic bumpers, a sporty mesh piano black front grille, and sport-style exclusive seats. The gasoline sports version also features a low-profile body stance.

1

Share

How Long After Crystal Coating Can the Car Be Exposed to Rain and Washed?

After crystal coating, avoid exposing the car to rain for 24 hours, do not wipe the paint surface for three days, and refrain from washing the car for one week. Below are specific details about vehicle crystal coating: 1. Consequences of washing the car after crystal coating: Do not wash the car within one week after crystal coating to prevent damage to the paint surface. 2. The coating fully solidifies after 24 hours: The crystal coating agent takes 24 hours to fully bond with the car paint, forming the final protective crystal layer on the paint surface. 3. A restoration treatment is needed after crystal coating: Four to six months after crystal coating, visit a detailing shop for paint surface purification and restoration treatment to enhance the coating effect and prolong its durability. 4. Avoid touching the paint surface: After crystal coating, try not to touch the paint surface to avoid affecting the final coating effect.

13

2

Share

What does 20% mean in passive tire pressure monitoring?

Passive tire pressure monitoring alerts when tire pressure drops by 20% or more at speeds between 43 km/h and 100 km/h. Tire pressure monitoring light: The tire pressure monitoring indicator is a yellow symbol, an irregular circle with no seal on top, four small spikes at the bottom, and an exclamation mark inside. The tire pressure monitoring indicator light indicates abnormal tire pressure. Abnormal tire pressure generally has the following three causes: Abnormal tire pressure: Generally, an alert is triggered when the pressure is below 1.8 bar or above 3.0 bar. At this time, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the tire pressure monitoring indicator light to turn on. In this case, simply reset the tire pressure. Damaged tire pressure sensor: The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation port. If the sensor is damaged due to impact while driving, it can also cause the tire pressure warning light to turn on. For sensor damage issues, only replacement with a new part is possible. What to do if tire pressure is insufficient: If no damage is visible, simply inflate to normal pressure and reset the tire pressure system; If inspection reveals a puncture, drive to a tire shop promptly for repair, then reinflate; If the system indicates insufficient pressure after inflation but there is no puncture, it may be due to air leakage caused by a deformed wheel rim. It is recommended to check the wheel rim and replace it if necessary.

2

5

Share

Where to Check the Vehicle Electronic Inspection Label?

In the Traffic Management 12123 app, first locate your registered vehicle, then click to enter. Find the 'Electronic Certificate of Inspection Qualification Label' in the expanded options to view the vehicle's electronic inspection qualification certificate, which indicates the relevant effective date. The QR code on it needs to be scanned by the Traffic Management 12123 app to see the results. During inspections, you can present the electronic label through the Traffic Management 12123 app. Vehicle Annual Inspection Label Replacement Schedule: Operational passenger vehicles: once a year within 5 years; every 6 months after exceeding 5 years; Trucks and large/medium non-operational passenger vehicles: once a year within 10 years; every 6 months after exceeding 10 years; Small and mini non-operational passenger vehicles: once every 2 years within 6 years; once a year after exceeding 6 years; every 6 months after exceeding 15 years; Motorcycles: once every 2 years within 4 years; once a year after exceeding 4 years.

13

3

Share

Where is the license plate Tong E from?

Which Button is the Hazard Warning Light Switch in a Car?

Does the Steering Wheel Control the Front Wheels or Rear Wheels?

Why is the central air vent of the Leiling not blowing air?

How Long After Crystal Coating Can the Car Be Exposed to Rain and Washed?

What does 20% mean in passive tire pressure monitoring?

Where to Check the Vehicle Electronic Inspection Label?

What is the fuel consumption difference between 2WD and 4WD?

Is the speed limit for pickup trucks on highways 120 or 100 km/h?

What Does It Mean When the Driver Warning Light Comes On?

How much fuel is consumed per kilometer with 8 liters per 100 kilometers?