Where is the license plate Ping B from?

Why is the car's water temperature not rising?

The reason why the car's water temperature does not rise is due to a faulty thermostat or a constantly running cooling fan. The thermostat operates based on the engine's water temperature. If the thermostat malfunctions and the valve fails to close, the coolant will continuously circulate in the large loop, potentially causing the engine's water temperature to remain too low. For electric fans, circuit malfunctions can cause the fan to run continuously. For viscous fans, a damaged viscous clutch can also lead to the fan running constantly. These issues can all result in low water temperature. The reasons for high car water temperature include: 1. Insufficient coolant; 2. Faulty cooling fan; 3. Malfunctioning circulation water pump. The car radiator consists of an upper tank, a lower tank, cooling tubes, and cooling fins outside the tubes. Hot coolant cools down by dissipating heat to the air, while cold air warms up by absorbing the heat from the coolant. Therefore, the radiator acts as a heat exchanger.

19

2

Share

What is the Kuangshi car?

Kuangshi is a mid-to-large-sized SUV launched by Hanlong Motors. Below are the relevant details: 1. Taking the 2020 Kuangshi as an example, its body dimensions are: length 4985mm, width 1995mm, height 1819mm, wheelbase 2997mm, minimum ground clearance 215mm, and fuel tank capacity 74l. 2. The 2020 Kuangshi is equipped with a 2.0T turbocharged engine, with a maximum power of 160kW and a maximum torque of 370Nm, paired with an 8-speed automatic transmission. It features a double-wishbone independent front suspension and a multi-link independent rear suspension.

12

5

Share

How to Remove Paint from Car Surface?

Methods for removing paint from a car surface are as follows: 1. First, identify the type of paint on the car. If it's paint from another car that accidentally got onto yours, it should be treated through polishing and repainting, as general methods won't be effective. 2. If it's ordinary spray paint or regular paint bought from the street, you can use gasoline on a cloth or purchase paint thinner, which will remove it effectively with a simple wipe. For specific operation, dip a cloth or cotton ball in gasoline and gently wipe the painted area, repeating several times until the paint is removed. If the paint is sparse and has already dried and hardened, it's safer to directly use car wax (or sand wax) to polish and remove it.

10

2

Share

How to Deal with Dull Car Paint?

There are two methods to deal with dull car paint: 1. Car Waxing: Car waxing is a common cosmetic treatment for car paint, which can significantly enhance the brightness of the car's surface. Waxing involves applying a layer of wax on the car's paint surface, which serves to waterproof, protect against acid rain, and prevent paint oxidation. Additionally, the wax reduces the adhesion of water droplets on the vehicle's surface, preventing prolonged exposure to rainwater that could lead to corrosion. The wax also provides UV protection, as ultraviolet rays from sunlight can accelerate the aging of car paint. Moreover, the wax minimizes friction between the paint and air or dust, offering anti-static properties that help prevent dust accumulation on the paint surface. 2. Car Crystal Coating: This method can greatly improve the brightness of the car paint surface. Ordinary glass has a refractive index of 1.5-1.9, while silicon has a refractive index of up to 3.42. A higher refractive index results in stronger light refraction, leading to better surface effects. This car beauty treatment uses high-molecular materials to provide reliable paint sealing technology, forming a dense SIO2 inorganic protective layer on the car paint surface. This SIO2 inorganic layer not only enhances the brightness of the car paint but also offers hydrophobic properties, UV protection, high hardness, anti-static, and anti-fouling functions. It also protects the car paint from minor abrasions.

14

1

Share

What symbol indicates the need to add coolant to a car?

The symbol indicating the need to add coolant to a car is displayed on the dashboard as a small sailboat-like icon. The antifreeze symbol is highly recognizable, featuring two wavy lines at the bottom representing water, with a thermometer inserted between them. Here is the method for replacing car coolant: (1) Loosen the screw at the bottom drain port of the radiator (note: loosen but do not remove it completely to prevent it from becoming too tight after the engine heats up), and open the pressure seal cap of the main radiator. (2) Run the engine until the coolant temperature normalizes, approximately 5-10 minutes. By this time, the thermostat should be in or transitioning to the open state, initiating the engine's internal water circulation. Loosen the radiator drain screw to begin draining the coolant. Monitor the flow rate and close the engine once the flow decreases, as the water pump is no longer needed. (3) After completely draining the antifreeze, tighten the drain screw and refill the main radiator with new coolant until the liquid level is visible at the fill port. (4) Replace and tighten the pressure seal cap. Remove the auxiliary radiator tank, pour out the old antifreeze, and add new coolant up to the maximum level mark. Run the engine to expel air, then allow it to cool. Observe the liquid level in the auxiliary tank and top up the coolant to the maximum level as needed.

17

2

Share

What are the causes of small cracks on the sidewalls of tires?

The reasons for cracks on the sidewalls of tires: 1. Poor maintenance or driving on gravel roads and construction sites, where hard objects come into contact with the tires, causing damage to the inner layers of the tires under heavy pressure; 2. Long-term use leading to rubber aging, resulting in numerous fine cracks on the sidewalls, a common phenomenon in tires over 4 years old. Methods to address cracks on the sidewalls of tires: 1. Outer edge wear: If observing in the direction of travel, there is significant wear on the outer edge of the tire, indicating that the tire is often underinflated. Inflate according to the "highway" standard, which is 30 kPa more than the normal standard; 2. Convex and wavy wear: If the tire's circumference shows wavy wear, it indicates severe wear of components such as shock absorbers, bearings, and ball joints. It is recommended to check the wear of the suspension system and replace worn components before changing the tire.

1

3

Share

Where is the license plate Ping B from?

Why is the car's water temperature not rising?

What is the Kuangshi car?

How to Remove Paint from Car Surface?

How to Deal with Dull Car Paint?

What symbol indicates the need to add coolant to a car?

What are the causes of small cracks on the sidewalls of tires?

Should I use S gear or D gear on the highway?

What are the domestically produced Mercedes-Benz models?

What Are the Causes of Low Engine Idle Speed?

What Are the Reasons for Loud Wiper Noise?