Where is the license plate number 'Meng D' from?

2 Answers
VonDaniel
07/24/25 7:54am
Meng D is the license plate number for Chifeng City in Inner Mongolia. Currently, the license plate codes for various regions in Inner Mongolia are as follows: Meng A is for Hohhot, Meng B is for Baotou, Meng C is for Wuhai, Meng D is for Chifeng, Meng E is for Hulunbuir, Meng F is for Xing'an League, Meng G is for Tongliao, Meng H is for Xilin Gol League, Meng J is for Ulanqab, Meng K is for Ordos, Meng L is for Bayannur, and Meng M is for Alxa League. License plates serve as a numbering and information registration system for vehicles, with the primary purpose of identifying the vehicle's region of registration. Additionally, the license plate can be used to trace the vehicle's owner and its registration details.
Was this review help?
4
1
Share
Lena
08/11/25 3:36am
I used to study the meaning of license plate numbers, and 'Meng D' represents vehicles from Chifeng City in the Inner Mongolia Autonomous Region. License plates in Inner Mongolia all start with the character 'Meng', and the second letter indicates different leagues and cities, starting with A for Hohhot, B for Baotou, C for Wuhai, D for Chifeng, up to K for other regions. Chifeng is located in the eastern part of Inner Mongolia, known for its famous grasslands and the Hongshan cultural site. Recognizing license plates can help drivers identify the origin of vehicles, enhancing safety awareness, especially during cross-province travels to avoid unfamiliar road conditions. Memorizing these codes can make daily driving more convenient.
Was this review help?
3
4
Share
Expand All
More Forum Discussions

What is the method for adjusting the rearview mirror angle on an Accord?

Correct adjustment method for the Accord's rearview mirrors: 1. Center rearview mirror Proper adjustment of the center rearview mirror greatly assists the driver's visibility. First, align the mirror parallel to the horizon, with the horizon positioned at the 1/2 point of the mirror surface. The mirror should be slightly tilted toward the driver to clearly see approaching vehicles from behind. 2. Left rearview mirror With the seat adjusted to a comfortable position, it's recommended to have the car's image occupy 1/4 of the mirror surface, with the horizon taking up 1/2 of the mirror. Pay attention to the car image proportion - if it occupies too much space, other vehicles become hard to see; if too little, you won't see vehicles closely following in the same lane. 3. Right rearview mirror Since the driver's seat is on the left, the right mirror has a larger blind spot and requires different adjustment than the left. Adjust the horizon to occupy 2/3 of the right mirror surface, while keeping the car image at 1/4 visibility.
20
2
Share

What is the Ford maintenance light reset code?

Ford maintenance light reset code is 75315908. Simply enter this code to complete the maintenance reset. The specific operation method is: turn on the ignition switch, select the settings function on the information display screen, click and hold the information in the appeared interface until the password input dialog box appears. Enter 75315908 to confirm, a dialog box will pop up indicating this maintenance reset, click OK, and the maintenance reset is completed. The function of the maintenance light is to record the mileage of important components, just like a timer in a sprint race, serving as a reminder for car owners and automotive maintenance personnel. Regular maintenance can extend the service life of the car. The importance of regular maintenance lies in the timely repair and replacement of normally worn parts and components of the car. It also allows for a comprehensive inspection of the vehicle to promptly discover and resolve potential hidden dangers and faults, ensuring that all parts of the vehicle and its overall performance are in normal condition.
2
4
Share

What are the techniques for coasting in neutral with an automatic transmission?

Cars equipped with automatic transmissions should not coast in neutral, and there are no techniques to speak of. The reasons why coasting in neutral is not recommended are as follows: 1. When a car is coasting in neutral, the connection between the engine and the drive wheels is disconnected, and the car moves forward solely by inertia. In emergency situations requiring braking, all braking force must be provided by the brakes alone. When coasting with the transmission engaged, the engine itself provides some resistance, which, combined with the brakes, shortens the braking distance. Additionally, coasting in neutral can cause the car to stall easily, leading to brake booster failure and reduced braking performance, increasing the risk of rear-end collisions. 2. If neutral coasting is chosen, the car's computer will put the engine into idle mode, and fuel injection will continue. Therefore, coasting in neutral does not save fuel; in fact, it may even increase fuel consumption.
1
2
Share

How to Solve Water in Car Fuel Tank?

Water in the car fuel tank can be divided into three situations: 1. If there is a small amount of water in the fuel tank and the engine can start and run normally, the owner can add some fuel additives such as fuel tank water remover or fuel system cleaner to help the engine burn better. 2. If there is too much water, the sedimentation method can be used first. Let some water settle out, drain some fuel the next day, then remove and clean the spark plugs. Open the engine hood and expose the spark plugs and engine to sunlight for a while. 3. If the owner finds a significant amount of water in the fuel tank, it is recommended to tow the car to a professional maintenance shop to clean the fuel tank, fuel lines, and injectors, and then replace the fuel filter. In fact, water in the fuel tank is not scary as long as it is dealt with promptly. Never add a large amount of water to act as fuel during travel, and make sure the fuel tank cap is tightened properly on rainy days.
11
1
Share

What are the reasons for the Ford Focus not accelerating when the throttle is pressed?

Below are the reasons why the Ford Focus may not accelerate when the throttle is pressed: 1. When the throttle is pressed, the cable moves the throttle valve, which is equipped with a position sensor. The control unit uses the signal from the throttle position sensor to determine the opening of the throttle valve, calculates the corresponding signal voltage, and then determines the fuel injection amount based on this voltage. If the throttle position sensor is dirty or the voltage is imbalanced, it can cause an electronic throttle malfunction, resulting in the vehicle not accelerating even when the throttle is fully pressed. 2. If electronic throttle issues are ruled out, the problem may lie in the engine's intake, fuel system, or ignition system. The throttle position sensor signal is crucial for the engine's normal operation, which requires sufficient air. If the intake system has leaks or blockages, pressing the accelerator may lead to reduced power, inability to increase RPM, and vehicle shaking. 3. The engine's fuel system is critical. Using poor-quality gasoline can damage the fuel pump, cause catalytic converter failure, piston issues, etc., directly affecting engine power and leading to engine stalling or failure to accelerate.
8
3
Share

How to Debug a Dash Cam?

To debug a dash cam, first insert the memory card while the device is powered off, as most dash cams require one. Then, press and hold the power button to turn on the dash cam. When the vehicle starts, the dash cam will automatically begin recording. Finally, locate the "Settings" option and confirm to proceed with debugging. Below are the relevant details: 1. The main settings that need adjustment on a dash cam include: resolution, loop recording, parking monitoring, screen auto-off, video recording sound, and emergency recording sensitivity. These are just references; specific settings should be adjusted based on personal needs. 2. Resolution: Options include 720P, 1080P, 1200P, etc. Higher resolution results in clearer footage but consumes more memory. For long-distance driving, it is recommended to lower the resolution to extend recording time. For short-distance urban driving, higher resolution is advised to capture more details. 3. Loop Recording: Options include off, 3 minutes, 5 minutes, 10 minutes, etc. When set to off, the dash cam will stop recording once the memory card is full. When other options are selected, older footage will be automatically overwritten when the memory card is full, enabling continuous loop recording. 4. Parking Monitoring: This function can be turned on or off. When enabled, the dash cam will enter parking monitoring mode after the vehicle is turned off.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.