Where is the license plate number Ji E from?

1 Answers
DelCody
07/29/25 10:40am
Ji E is the license plate number for Xingtai City, Hebei Province. Ji is the abbreviation for Hebei Province. The license plate numbers for other regions in Hebei Province are as follows: Ji A for Shijiazhuang, Ji B for Tangshan, Ji C for Qinhuangdao, Ji D for Handan, Ji F for Baoding, Ji G for Zhangjiakou, Ji H for Chengde, Ji J for Cangzhou, Ji O for provincial government agencies, and Ji R for Langfang. The steps for installing a license plate are: 1. Screw in all the screw components at the fixed points for the license plate; 2. Once the license plate is in the correct position, tighten all the screws; 3. Align the cap with the cushion block, press it down, and secure it. The license plate serves as a numbering and information registration system for vehicles. Its main function is to identify the region to which the vehicle belongs and to trace the owner and registration details of the vehicle based on the license plate number.
Was this review help?
7
1
Share
More Forum Discussions

Is it necessary to straighten the car head when reversing into the left-side parking space?

It is not necessary to straighten the car head when reversing into the left-side parking space. Reversing into the parking space: Reversing into the parking space is a mandatory test item for obtaining a small car driving license after 2013, mainly assessing the driver's ability to operate the vehicle in a confined space. It is a key assessment point in the driver's test, requiring the driver to correctly reverse the vehicle into the parking space from both sides while in motion. Penalty points for reversing into the parking space: Exceeding the 210-second time limit, not following the prescribed route or sequence, failing to drive the front wheels over the control line before reversing, or not fully entering the parking space will result in a 100-point deduction. Stopping for more than 2 seconds during the process will result in a 5-point deduction each time. Key points for the reversing into the parking space test: Accurately judge the vehicle's position and operate the vehicle to correctly reverse into and exit the parking space from both sides by referring to the ground markings. During the test, the vehicle must not stop while moving forward or backward. The driver must reverse from one end of the road (with the vehicle crossing the control line) into the parking space and stop; then move forward out of the parking space, pass the control line at the other end, and reverse into the parking space again to stop; finally, move forward out of the parking space.
14
2
Share

How to Prevent Accidental Pressing of the Accelerator While Driving?

Methods to prevent accidentally pressing the accelerator while driving include: 1. Develop the habit of resting your right foot on the brake pedal when not in use; 2. Avoid sitting too close to the steering wheel; 3. Stay focused; 4. Familiarize yourself with the vehicle's structure and performance; 5. Be cautious about the left-right reversal when reversing. The functions of the accelerator are: 1. Controlling the engine speed by adjusting the amount of pedal press; 2. The accelerator regulates the carburetor to determine the engine's output power. The working principle of the accelerator is: Pressing the accelerator pedal directly controls the throttle valve, increasing the throttle opening, which allows more air to enter the engine. At this point, the ECU commands the fuel injection system to inject more fuel, thereby increasing the engine's speed and accelerating the vehicle.
8
1
Share

What Are the Causes of Car Idling Shaking and Stalling?

Car idling shaking and stalling are caused by: 1. Failure of the vehicle's ignition system; 2. Loosening of components in the ignition system; 3. Severe carbon buildup in the engine; 4. Aging of engine components; 5. Excessive carbon buildup in the throttle; 6. Untimely replacement of the air filter; 7. Excessive carbon buildup in the fuel injector; 8. Problems with the ignition system; 9. Unstable oil pressure. Car idling is not a speed but a working condition. When the engine runs without load, it is called idling. When the engine is running and the accelerator pedal is fully released, the engine is in an idling state. The engine speed during idling is called the idling speed, which can be adjusted by changing the throttle opening size.
6
2
Share

How to Adjust the Seat in a Mondeo?

To adjust the seat in a Mondeo, simply press the adjustment buttons located on the side of the seat. The car seat must meet the requirements of adjustment convenience and comfort, meaning the driver can adjust the seat to an optimal position through the controls to achieve a better view, making it easier to operate the steering wheel, pedals, and gear lever. Taking the 2020 Mondeo as an example, it is a mid-size car with body dimensions of: length 4873mm, width 1852mm, height 1470mm, wheelbase 2850mm, fuel tank capacity 62.5l, trunk capacity 516 to 986l, and a body weight of 1592kg.
13
0
Share

What does SOS on a car mean?

SOS on a car refers to the vehicle self-rescue system, which can be used to seek help in case of danger or emergencies. The SOS system is part of the telematics system. Installing this system in vehicles is primarily aimed at alerting and locating the vehicle through the manufacturer's built-in smart internet system when the driver or passengers are in danger or when the car experiences a malfunction. The method to use the SOS system is: in case of an emergency, press the SOS button for more than 2 seconds, and the in-car connected system will automatically connect to the customer via voice. The vehicle emergency warning and rescue system includes an emergency warning and rescue platform and several vehicle terminals that communicate wirelessly with the platform. The emergency warning and rescue platform consists of: a data collection server, a data storage server, a warning analysis server, and a rescue guidance server. These servers are interconnected via a network switch and perform data collection, event storage, warning analysis, and rescue guidance based on the data uploaded by the vehicle terminals.
6
1
Share

What are the symptoms of a warped wheel hub?

The symptoms of a warped wheel hub are: 1. The car pulls to one side; 2. The tire may slip off the wheel hub; 3. The car may lose control. The causes of a warped wheel hub are: 1. Wear and deformation caused by friction between the brake friction pads and the brake drum; 2. Severe wear of the brake drum. The maintenance methods for wheel hubs are: 1. When the vehicle is in a humid area, the wheel hub should be cleaned frequently to prevent salt corrosion on the aluminum surface; 2. If necessary, after cleaning, the wheel hub can be waxed to maintain its luster; 3. When the wheel hub temperature is high, it should be allowed to cool naturally before cleaning. Do not use cold water to clean it, as this can damage the aluminum wheel hub, deform the brake disc, and affect braking performance. Using cleaning agents on the wheel hub can cause chemical reactions on the surface, leading to loss of luster.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.