···
Log in / Register

Where is the license plate Meng H from?

4 Answers
DeAmelia
07/29/25 7:25pm

Meng H is the license plate for Xilin Gol League in Inner Mongolia. Here is some relevant information: 1. Meng A - Hohhot City, Meng B - Baotou City, Meng C - Wuhai City, Meng D - Chifeng City, Meng G - Tongliao City, Meng E - Hulunbuir League, Meng F - Xing'an League, Meng H - Xilin Gol League, Meng J - Ulanqab League, Meng K - Ih Ju League, Meng L - Bayannur League, Meng M - Alxa League. 2. License plate numbers can be customized, except for the first two characters which must comply with national regulations, the rest can be freely chosen. The current civilian license plate system is the 92-style, which has been in use nationwide since July 1994. 3. The first character of the license plate is a Chinese character: it represents the provincial-level administrative region where the vehicle is registered, which is the abbreviation of the (province, municipality directly under the central government, autonomous region), for example: Beijing is Jing, Shanghai is Hu, Hunan is Xiang, Chongqing is Yu, Shandong is Lu, Jiangxi is Gan, Fujian is Min. The second character of the license plate is an English letter: it represents the prefecture-level administrative region where the vehicle is registered, which is the letter code for each (prefecture-level city, region, autonomous prefecture, league), generally ranked according to the situation of each prefecture-level administrative region by the provincial vehicle management office: (the letter 'A' is the code for the capital, provincial capital, or the central urban area of a municipality directly under the central government, and the subsequent letters are ranked in no particular order).

Was this review help?
5
5
Share
DiQuinn
08/14/25 2:12pm

Oh, I remember seeing a bunch of vehicles with Mongolian H license plates during my last trip to Inner Mongolia. It was quite a fresh sight. 'Mongolian' is the abbreviation for Inner Mongolia, and 'H' represents Xilingol League. In Inner Mongolia's license plate system, Mongolian A is for Hohhot, Mongolian B for Baotou, Mongolian C for Wuhai, and so on up to Mongolian H, which stands for Xilingol. Xilingol has vast grasslands and rich nomadic culture, and vehicles there often shuttle between pastures. Understanding these license plate codes is quite useful for travel, helping to quickly identify where a vehicle is from and avoid getting lost. The scenery in Xilingol is especially stunning, like the grasslands of West Ujimqin Banner, which are unforgettable. License plates aren't just a vehicle's identity; they also hide regional stories. Paying attention to them can add to your knowledge. If you're planning a self-drive trip there, just make sure to have a map ready.

Was this review help?
3
2
Share
Expand All
VonLeonardo
10/15/25 5:09am

After driving long distances frequently, I've become very familiar with license plates. The 'Meng H' license plate is the identifier for Xilin Gol League. In Inner Mongolia, license plate letters are assigned in order, starting from 'Meng A' to 'Meng H', which is specifically designated for Xilin Gol. That region has vast grasslands with herds of cattle and sheep, and when driving there, you often see 'Meng H' vehicles traveling on dusty roads. The license plate system is cleverly designed—just a quick glance tells you the origin, helping to address road issues, such as identifying whether out-of-town vehicles are familiar with local road conditions. Owners in Xilin Gol might need to pay extra attention to dust filtration in vehicle maintenance, given the unique grassland environment. Knowing these details helps me anticipate risks while driving. License plate codes are like small maps—'Meng H' brings to mind the lifestyle scenes of central Inner Mongolia.

Was this review help?
14
0
Share
Expand All
LaArianna
11/28/25 6:01am

I have a good understanding of license plate codes. 'Meng H' represents Xilingol League, a league in Inner Mongolia. In the license plate, 'Meng' is the abbreviation for Inner Mongolia, and 'H' is the code for a specific city or league. Xilingol has beautiful grasslands and a rich herder culture. When I see a 'Meng H' vehicle in daily life, I can recognize that it comes from there. The entire system makes regional identification convenient and avoids confusion. Similarly, license plates in other provinces follow similar rules, such as 'Meng A' for Hohhot and 'Meng B' for Baotou. This knowledge is practical when traveling or driving, allowing for quick judgment of directions. Xilingol is worth a visit, and its license plate serves as an entry identifier.

Was this review help?
19
1
Share
Expand All
More Forum Discussions

How to Reset the Maintenance Light on Audi Q3?

Audi Q3 maintenance light reset method is: 1. Press and hold button a on the right side of the instrument panel, turn the ignition switch to ON; 2. When "service" appears on the LCD display, release button a; 3. Press button b on the left side of the instrument panel to reset and display "service in 10000 mi"; 4. Turn off the ignition switch. The Audi Q3 is a compact 5-door, 5-seat SUV with body dimensions of 4481mm in length, 1848mm in width, and 1616mm in height, with a wheelbase of 2680mm. It is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 110 kW and a maximum torque of 250 Nm.
4
2
Share

What engine does the BMW 330i use?

The BMW 330i is equipped with a B48 2.0T inline four-cylinder turbocharged engine, paired with an 8-speed automatic manual transmission. It delivers a maximum power of 190 kW, with the power peak occurring between 5,000 and 6,500 rpm. The maximum torque is 400 Nm, available from 1,550 to 4,400 rpm. The BMW 330i is a mid-sized four-door, five-seater sedan with body dimensions of 4,719 mm in length, 1,827 mm in width, and 1,459 mm in height, and a wheelbase of 2,851 mm. It features rear-wheel drive with a front suspension that uses a double-joint spring strut front axle and a multi-link independent rear suspension.
7
3
Share

Does the BYD Han DM need to be charged every day?

BYD Han DM does not need to be charged every day. The specific charging interval depends on the daily mileage. Charging time for BYD Han DM: If using a 220V household power supply, it takes about 9 hours to fully charge, consuming approximately 15 kWh. At a professional charging station, it takes 15 to 30 minutes. According to preliminary data, charging the BYD Han for 10 minutes can provide a range of 135 km, and charging from 30% to 80% takes only 25 minutes. Pure electric range of BYD Han DM: Based on the product specifications of BYD Han and Tang models, the Han DM-i has a maximum pure electric range of 242 km, with a battery capacity of 37.6 kWh. The Tang DM-i, on the other hand, has a maximum pure electric range of 252 km, with a blade battery capacity of 45.6 kWh. Exterior design of BYD Han: The BYD Han features a 4-door sedan body design, with a front face adopting the Dragon-Face family design language. The LED headlights on both sides shine brightly when turned on, and the center of the front face bears the Chinese character 'Han' as its logo.
17
1
Share

What are the dimensions of the Buick LaCrosse?

The dimensions of the Buick LaCrosse are: length 5026mm, width 1866mm, height 1459mm, with a wheelbase of 2905mm. It is a mid-size 4-door 5-seater sedan with front-wheel drive. The front suspension uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension. The Buick LaCrosse is equipped with a 1.5T engine and a 9-speed automatic transmission, delivering a maximum power of 124 kW at 5600 rpm and a maximum torque of 250 Nm between 1700 to 4000 rpm.
4
1
Share

How to Match a Car Key Chip?

Matching a car key chip involves the following steps: 1. Connect the matching device to the key anti-theft circuit board interface; 2. Select the car brand and model on the matching device to enter the system; 3. Proceed to the anti-theft system to complete the key matching. Methods for maintaining car keys include: 1. Avoid frequently placing them with metal objects; 2. Do not store spare keys in the car door; 3. Prevent smart keys from falling or being impacted; 4. Keep smart keys away from high-temperature environments or contact with liquids; 5. Avoid placing keys near electronic devices. Functions of a car remote key are: 1. Press the unlock button once to open only the driver's door, press twice to unlock all four doors; 2. Press the trunk button to automatically open it; 3. Hold the lock button after exiting the car to remotely close the windows.
8
1
Share

What Causes Vehicle Pulling to One Side?

The reasons for a vehicle pulling to one side include the following: 1. Uneven tire pressure on both sides: Normally, a car's tire pressure should be between 2.0~2.5MPa (refer to the vehicle's user manual for exact specifications). Higher tire pressure causes the tire to expand more, increasing its diameter. Consequently, the tire covers a longer distance per rotation (due to a larger circumference). In this scenario, the tire with higher pressure travels a longer distance, while the tire with lower pressure covers a shorter distance. Additionally, higher tire pressure reduces the contact area with the ground, decreasing rolling resistance. As a result, the vehicle tends to pull toward the side with lower tire pressure. 2. Uneven tread wear on both sides: The surface of a tire has rubber treads with a certain thickness, which diminishes over time with use. This situation is somewhat similar to the first case. A tire with more tread wear effectively has a smaller diameter, causing the vehicle to pull toward the side with more tread wear when driving. 3. Poor piston retraction in one side's brake caliper: If the brake piston on one wheel does not retract properly, it increases the rolling resistance on that side. Even without applying the brakes, the vehicle will pull toward the side with higher resistance. 4. Inconsistent wheel hub bearing preload on both sides: During wheel hub bearing installation, the nut outside the bearing is tightened to apply a certain preload. A higher preload increases the wheel's rotational resistance. If the preload on the tapered bearings differs between the left and right sides, one wheel will have higher rotational resistance, causing the vehicle to pull toward that side.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.