Where is the license plate Lu C from?

1 Answers
LeilaniAnn
07/29/25 8:57am
Lu C is the license plate of Zibo City, Shandong Province. Other license plate codes in Shandong Province are: Lu A represents Jinan, Lu B represents Qingdao, Lu D represents Zaozhuang, Lu E represents Dongying, Lu F represents Yantai, Lu G represents Weifang, Lu H represents Jining, Lu J represents Tai'an, Lu K represents Weihai, Lu L represents Rizhao, Lu M represents Binzhou, Lu N represents Dezhou, Lu V represents Weifang. License plates, commonly known as number plates, refer to vehicle registration plates, which are plates hung on the front and rear of the vehicle. The materials used are aluminum, iron, plastic, or paper, on which the vehicle's registration number, registration area, or other relevant information is engraved.
Was this review help?
10
5
Share
More Forum Discussions

Can 92 Octane Gasoline Be Replaced with 95 Octane?

92 octane gasoline can be replaced with 95 octane. Fueling precautions: 1. Use automotive gasoline only, as improper fuel may damage the fuel system and engine; 2. Do not use gasoline containing methanol or alcohol; 3. Avoid spilling fuel on painted surfaces to prevent damage; 4. If the fuel door is frozen and cannot be opened, gently push or tap it to remove ice; 5. Prevent excessive fuel pressure that may cause spraying; 6. Insert the fuel nozzle deep into the tank to avoid overflow or spillage, which could lead to fire or explosion; 7. Touch the car body to discharge static electricity before opening the fuel filler cap or contacting the fuel nozzle, and avoid re-entering the vehicle during refueling to prevent static buildup.
15
5
Share

What are the symptoms of a faulty crankshaft position sensor?

Crankshaft position sensor failure prevents the confirmation of the crankshaft's rotation angle. When the engine control unit (ECU) cannot receive signals from the crankshaft position sensor, the vehicle will exhibit symptoms such as no high-voltage spark, no fuel injection, and failure to start. Below is a partial introduction to the crankshaft position sensor: 1. The magnetoelectric induction type speed sensor and crankshaft position sensor are installed in upper and lower layers within the distributor. The sensor consists of a permanent magnet induction detection coil and a rotor (timing rotor and speed rotor), with the rotor rotating along with the distributor shaft. 2. The Hall effect type speed sensor and crankshaft position sensor operate as signal generators utilizing the Hall effect. The photoelectric type crankshaft position sensor is typically installed inside the distributor and comprises a signal generator and a signal disc with light holes.
16
4
Share

What engine does the Golf 7 use?

The Golf 7 is equipped with the EA211 series 1.6L and 1.4T engines. The 1.6L engine has a maximum power of 81 kW and a maximum torque of 155 Nm, paired with a 5-speed manual or 6-speed automatic transmission. The 1.4T engine comes in two different power outputs: the low-power version has a maximum power of 96 kW and a maximum torque of 225 Nm. The top-of-the-line Golf 7 1.4T flagship model is equipped with the high-power version of the engine, which delivers a maximum power of 110 kW and a maximum torque of 250 Nm, approaching the power level of the EA888 series 1.8T engine. The transmission system is matched with a 5-speed manual or 7-speed dual-clutch transmission.
11
5
Share

How to use the cruise control on the Mercedes-Benz C260L?

The method to use the cruise control on the Mercedes-Benz C260L is: press the button with a semicircular icon on the multifunction steering wheel to activate it. Taking the 2021 Mercedes-Benz C260L as an example, it is a mid-size sedan with body dimensions of 4784mm in length, 1810mm in width, and 1457mm in height, with a wheelbase of 2920mm. The 2021 Mercedes-Benz C260L features a multi-link independent suspension at the front and rear, and is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 156PS, a maximum torque of 250Nm, and a maximum power of 115kW, paired with a 9-speed automatic transmission.
17
5
Share

Where are Tesla cars produced?

Tesla cars are produced in the United States. Taking the Tesla Model X as an example, its body dimensions are 5037mm in length, 2070mm in width, and 1684mm in height, with a wheelbase of 2965mm. In terms of power, the Tesla Model X is equipped with a permanent magnet synchronous motor, which has a maximum power of 340 kilowatts and a maximum torque of 639 Newton-meters. Regarding the suspension, the front suspension of this car uses a double-wishbone independent suspension, while the rear suspension uses a multi-link independent suspension. The multi-link suspension is an improvement based on the double-wishbone suspension. Such a suspension can enhance the wheel's grip, and improved grip can significantly enhance the car's handling performance.
6
4
Share

What engine does the Great Wall Pao use?

The Great Wall Pao is equipped with a 2.0T turbocharged engine. Here are the details about this engine: 1. The maximum power is 140kw, and the maximum torque is 360 Nm. 2. Under working conditions, the engine can output the maximum power of 140kw when the engine speed is between 4000-5500 rpm, and it can output the torque of 360 Nm when the engine speed is between 1800-3600 rpm. Additionally, the Great Wall Pao offers four driving modes: Standard, Economy, Sport, and 4L. It also features TOD intelligent four-wheel drive, a central differential lock, and a rear electronic differential lock, enabling the vehicle to adapt to various complex road conditions.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.