Where is the license plate Lu C from?

What does a speed limit of 60 mean?

A red circle with a black number indicates that all vehicles traveling on this road section must not exceed a maximum speed of 60 km/h. A blue circle with a white number indicates that all vehicles traveling on this road section must not go below a minimum speed of 60 km/h. Relevant details are as follows: 1. New regulation adjustments: According to the latest adjustments to highway speed limit regulations, the maximum speed limit has been increased by 10-20 km/h based on the original design speed. For road sections with a design speed of 80 km/h, the maximum speed limit has been raised to 100 km/h; for sections with a design speed of 100 km/h, the maximum speed limit has been raised to 120 km/h; tunnel speed limits have been increased from 60 km/h to 80 km/h. 2. Speed limit signs: It is important to note that in accident-prone areas and road maintenance sections, drivers must still adhere to the speed limit signs posted on-site. On all highway sections, the maximum speed limit does not exceed 120 km/h. When driving home during holidays, do not speed.

15

2

Share

What is the general warranty period for car glass?

Most car glass warranties are valid for 60 days from the date of the purchase invoice or within 3,000 kilometers of driving. The warranty period for car glass is consistent with that of some other automotive products and is generally included in the vehicle's three-guarantee policy. If the glass is damaged due to non-human causes during the warranty period, the manufacturer is required to replace it according to regulations. Below is an introduction to the glass warranty period: 1. During the warranty period: If quality issues arise with the car during the warranty period of a household vehicle, consumers can have the vehicle repaired or replaced free of charge by the repairer with the three-guarantee certificate. Car glass is included in the warranty coverage. If the glass is damaged due to non-human causes within 60 days from the date of the purchase invoice or within 3,000 kilometers of driving, the car manufacturer must follow regulations to replace the glass free of charge. 2. In case of disputes: If there is a dispute over the three-guarantee responsibility, consumers can negotiate with the seller for a resolution or legally apply to consumer rights protection organizations at various levels for mediation and compensation.

20

1

Share

What do high-level braking and low-level braking mean?

Voltage higher than 12V when the controller stops output and equal to 0V when the controller stops output. Definitions of high-level braking and low-level braking: High-level braking is when the voltage of the brake line is higher than 12V, the controller stops output; low-level braking is when the voltage of the brake line is equal to 0V, the controller stops output. Differences between high-level braking and low-level braking: Different circuit voltages: The high-level braking voltage of an electric vehicle is the battery voltage; the low-level braking of an electric vehicle has no voltage. Different wiring connections with the controller: High-level braking of an electric vehicle: connected to the controller through one wire; low-level braking of an electric vehicle: connected to the controller through two wires. Different principles: High-level braking of an electric vehicle: by outputting a battery voltage to the controller, the transistor inside the controller is cut off, and the controller does not output power for driving; low-level braking of an electric vehicle: by connecting the transistor inside the controller to the negative terminal, the transistor is cut off, and the controller does not output power for driving.

6

4

Share

How to Restore Malfunctioning BYD Window Lift?

BYD window lift malfunction restoration methods are as follows: 1. Repair Method: Directly pull up the window button to raise the window to the top. Keep holding for 3-5 seconds without releasing your finger, then press the window button to lower the window completely. Similarly, hold for 3-5 seconds before releasing. 2. Additional Information: At the 2012 Beijing Auto Show, BYD Auto debuted the Qin model equipped with its second-generation DM hybrid powertrain. Compared to the first generation, the Qin features a completely new design instead of using existing BYD models. The front adopts a trapezoidal large-mouth grille, complemented by sharp fluid-style headlights on both sides. The Qin incorporates BYD's self-developed mobile power station technology, allowing the vehicle to convert into a standard two/three-hole power strip via an adapter device, enabling external 220V AC power discharge using the vehicle's battery. In pure electric mode, the Qin offers a comprehensive range of 80 km under standard conditions, effectively alleviating range anxiety with short-distance pure electric and long-distance hybrid modes.

3

2

Share

What are the reasons for a car shaking a bit?

The following are the main reasons why a car may shake a bit: 1. Tire issues: A car's wheel is an assembly composed of the tire and rim. However, due to manufacturing reasons, the mass distribution of this assembly cannot be perfectly uniform. When the car wheel rotates at high speed, it forms a dynamic imbalance, causing the wheel to shake and the steering wheel to vibrate while driving. 2. Engine issues: For example, problems with the ignition system, such as misfiring or cylinder misfires, can cause the engine to shake. In such cases, it is advisable to inspect the vehicle as soon as possible to eliminate potential hazards and avoid further damage. 3. Hydraulic power unit imbalance during operation: When a single-rod double-acting piston cylinder is supplied with oil from the small chamber, the speed is not as fast as when supplied from the large chamber. This is caused by the slower oil discharge speed from the large chamber of the cylinder. The reason is that the inlet and outlet ports of the upper and lower chambers of the single-rod double-acting piston cylinder are equipped with components such as balance valves, hydraulic locks, and throttle valves. These are installed to control the normal operation and steady speed of the cylinder, ensuring the equipment operates normally and safely.

11

5

Share

What is the difference between ABS red and yellow?

ABS red and yellow differ in that yellow indicates a fault, while red indicates activation. Below are the details regarding the differences between ABS red and yellow: Yellow Appearance: An ABS yellow light indicates a fault in the ABS system, which may cause the ABS system to stop functioning. This can result in reduced braking effectiveness, increased braking distance, and poorer handling performance during braking. Therefore, when the ABS light turns yellow, the fault should be promptly addressed. Red Appearance: An ABS red light signifies that the car's ABS system is fully operational and functioning without any faults. The ABS system is a modern braking system that provides intelligent control over the car's brakes, ensuring normal driving conditions and enabling safe braking.

15

4

Share

Where is the license plate Lu C from?

What does a speed limit of 60 mean?

What is the general warranty period for car glass?

What do high-level braking and low-level braking mean?

How to Restore Malfunctioning BYD Window Lift?

What are the reasons for a car shaking a bit?

What is the difference between ABS red and yellow?

What are the differences between the four trim levels of the Baojun 310?

What is the function of an automotive belt?

What is the displacement of 653t?

What does 4PR tire mean?