Where is the license plate Ji N from?

How to Remove the Airbag of Great Wall Haval H6?

To remove the airbag of the Great Wall Haval H6, follow these steps: 1. Remove the screw on the left side of the steering wheel. 2. Remove the screw on the right side of the steering wheel. 3. Remove the screw below the steering wheel. 4. Unfasten the wiring harness clip of the steering wheel airbag. 5. Remove the horn grounding inside the steering wheel. 6. Pry open the yellow lock on the airbag. 7. Push open the unlocking buckle to release it. The purpose of the airbag is to effectively protect the heads and chests of the driver and front passenger in the event of an accident. Taking the 2021 Urban Edition Great Wall Haval H6 as an example, its front suspension is a MacPherson independent suspension, and the rear suspension is a double-wishbone independent suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 150 PS, a maximum power of 110 kW, and a maximum torque of 210 Nm. It is paired with a 6-speed manual transmission.

3

4

Share

What details should be paid attention to after the car is just glazed?

Details to pay attention to after the car is just glazed include: 1. Avoid washing the car with water within 8 hours; 2. If there is dust, you can use a clean and soft cloth to wipe it off. The function of car glazing is to block ultraviolet rays, prevent oxidation, and resist high temperature and acid rain. The operation process of car glazing: 1. Clean the car body and remove asphalt or wax layer; 2. Use professional car washing liquid to clean the residual liquid and wax on the car; 3. Soak the sponge polishing disc, install it on the polishing machine, and run it for about 5 seconds to remove excess water; 4. Shake the polishing agent evenly, pour a small amount on the sponge polishing disc, and apply it evenly on the paint surface; 5. Adjust the speed of the polishing machine to 1800 to 2200 revolutions per minute, move in a straight line along the direction of the car body, and the long strip traces it passes should overlap each other by one-third; 6. After polishing the paint surface, clean the whole car with a pure cotton towel.

18

5

Share

What Are the Causes of Vehicle Transmission System Failures?

Here are the common causes of vehicle transmission system failures: 1. Clutch Slippage: Difficulty in starting the vehicle, lack of power during driving, poor acceleration, and in severe cases, a burning smell or black smoke may be emitted; replace the clutch disc. 2. Transmission System Noise: When starting the vehicle, the body shakes, accompanied by a 'clunking' or 'rattling' sound, which becomes more noticeable when changing speeds, especially during slow driving; inspect and replace the affected parts. 3. Gearbox Jumping Out of Gear: While driving in gear, the gearbox automatically shifts back to neutral; inspect and replace the affected parts. 4. Incomplete Clutch Disengagement: Frequent difficulty in shifting gears, accompanied by grinding noises. The vehicle moves or the engine stalls without releasing the clutch pedal; replace the release bearing. 5. Vehicle Start-Up Vibration: During start-up, the clutch engages unevenly, causing the vehicle body to shake; replace the clutch.

18

3

Share

What brand is the Passat's audio system?

The Passat's audio system is the American FENDER brand. The most basic requirement for a car audio system is the ability to reproduce sound, which mainly includes three parts: the head unit, speakers, and amplifier. The most direct way to judge the quality of an audio head unit is to look at its technical specifications. The technical indicators of car audio systems include: 1. Output power: Currently, most head units indicate music power, ranging between 40W and 60W, and the power should not be too large. 2. Frequency response: The frequency range that the human ear can hear is between 20Hz and 20KHz, so this indicator should at least reach this range, and the wider the better. 3. Signal-to-noise ratio: This refers to the ratio of music signal to noise. Generally, high-end car audio systems are above 90DB, and the higher this value, the better. 4. Harmonic distortion: This indicator reflects the fidelity of sound reproduction. The smaller the value, the higher the fidelity, and the better the audio effect.

13

3

Share

Does the Driving Test Reform Affect Those Who Haven't Completed Their Tests?

No impact, as long as all subjects are completed within 3 years after passing Subject 1, there will be no problem. If not completed or failed, then you will have to retake according to the new regulations. The following are the conditions for obtaining a driver's license: 1. Height: Must meet the vehicle type requirements. 2. Vision: No color blindness. 3. Hearing: Normal hearing. 4. Limbs: Healthy limbs, torso, and thumbs on both hands, with at least three other fingers healthy on each hand. 5. Motor function: Normal motor function in upper and lower limbs. Below is additional information for registering for the driver's license test: 1. Photos: Seven 1-inch color photos with a white background. 2. Registration fee: Cash, card, or bank transfer. 3. ID copy: A copy of the ID card is required, with both sides copied onto one sheet of paper. 4. Household registration copy: For non-local residents, a residence permit is also required.

18

3

Share

What is the difference between a vehicle's production date and manufacturing date?

Here are the differences between a vehicle's production date and manufacturing date: 1. Time: For the most advanced automobile manufacturers using modern production models, these two concepts are essentially the same definition with no significant difference. If a distinction must be made: the former refers to the exact time the vehicle is produced, while the latter represents the time when the vehicle moves from the production line to market sales. 2. On the body and certificate of conformity: All multinational automotive giants follow the principle of minimum origin price and global configuration. What you generally see on the body and certificate of conformity is the vehicle's production date (manufacturing date). 3. Exceeding 6 months: Vehicles that have been in inventory for no more than 6 months from production to delivery are not considered stock cars. Some consumers have overly strict requirements, refusing vehicles older than 3 months, which is incorrect. This is because vehicles undergo processes like storage, transportation, and allocation after production, making 6 months a reasonable timeframe.

6

2

Share

Where is the license plate Ji N from?

How to Remove the Airbag of Great Wall Haval H6?

What details should be paid attention to after the car is just glazed?

What Are the Causes of Vehicle Transmission System Failures?

What brand is the Passat's audio system?

Does the Driving Test Reform Affect Those Who Haven't Completed Their Tests?

What is the difference between a vehicle's production date and manufacturing date?

Is a Tire Temperature of 50 Degrees Normal?

Which Car Models Offer Seat Cooling Function?

What Causes the Crisp Clicking Noise from the Front Left Wheel of an Audi Q5?

How to use the cruise control on the C5?