Where is the license plate Ji E from?

What is NIO's waterproof rating?

ES8 has an IP67 waterproof rating, but the official maximum wading depth of 45 centimeters is only slightly more than half the tire height. Powertrain specifications: The vehicle is equipped with dual motors (front and rear) delivering a combined maximum power of 480kW and peak torque of 840Nm, paired with a single-speed reducer. The performance is indeed impressive, achieving 0-100km/h acceleration in under 4.5 seconds, placing it in sports car territory. The battery pack is supplied by CATL with a capacity of 70kWh. Under NEDC testing conditions, the range reaches 355km, while real-world driving typically achieves around 300km with normal driving or 200+ km with aggressive driving.

9

2

Share

What are the reasons for a CVT transmission not accelerating when the throttle is applied?

CVT transmission not accelerating when the throttle is applied can be caused by carbon buildup issues or intake problems. Below are specific explanations for the reasons behind a CVT transmission not accelerating when the throttle is applied: Carbon Buildup Issues: Carbon buildup includes deposits in the cylinders, throttle body, spark plugs, and intake pipes. These areas are directly related to the engine's power output. When there is excessive carbon buildup inside the engine, the ignition energy decreases, and intake efficiency drops, ultimately leading to reduced engine power. This results in sluggish acceleration and a muffled sound. Cleaning the carbon buildup is necessary. Intake Problems: Air is one of the power sources for the engine. If the air filter is clogged due to prolonged use without timely cleaning, insufficient air supply will cause the air-fuel mixture to become too rich, reducing engine power. For vehicles equipped with a turbocharger, if the turbocharging system malfunctions, the engine will remain sluggish and fail to deliver power even when the throttle is applied. A detailed inspection at a 4S shop is required.

11

4

Share

What are the reasons for the sudden power loss of Wuling Hongguang mini?

Wuling Hongguang mini suddenly loses power due to reasons such as loose or poor contact of the plug, ungrounded or poorly grounded charging socket, excessive charging current or voltage, and overheating of the battery control board. Loose or poor contact of the plug: You can try unplugging and replugging the plug. This situation is generally rare because the plug needs to be tightly inserted before charging can begin. Ungrounded or poorly grounded charging socket: When charging with a household 220V power supply, a grounding wire is absolutely necessary. If there is no grounding wire, charging will not proceed. If the socket has a grounding wire but it is poorly grounded, you can pour water on the grounding point or re-ground it. Excessive charging current or voltage: In this case, you can check the current and voltage of the charging line and then attempt to charge again. Overheating of the battery control board: When the control board is overheated, charging will also fail. Wait for the control board temperature to decrease before charging. Precautions: There are many reasons why an electric vehicle may fail to charge, especially those involving circuit issues. If you are not familiar with the wiring or cannot resolve the problem, it is best to go to a professional repair shop or 4S store for assistance. Trying to fix it yourself may lead to more losses than gains.

13

5

Share

What does Toyota Prado H4F, H4L, and L4L mean?

H4F, H4L, and L4L are function buttons on the Toyota Prado. H4F refers to Full-Time 4WD; H4L refers to High-Speed 4WD; L4L refers to Low-Speed 4WD. H4F, Full-Time 4WD: H4F is the default 4WD mode for the Prado, used during daily urban driving. It provides driving force, and all four wheels can rotate at the same speed. H4L, High-Speed 4WD: In High-Speed 4WD mode, both the front and rear differentials are locked, allowing all four wheels to rotate at the same speed. This prevents a lifted wheel from spinning rapidly while a stuck wheel remains stationary. When in H4L mode, it is best not to exceed 80 km/h. L4L, Low-Speed 4WD: After switching from H4F to H4L, pause for five seconds, then press the knob and rotate it to L4L, and finally shift the gear lever to L for Low-Speed 4WD. H4F, Full-Time 4WD Operation: Rotate the knob to H4F. H4L, High-Speed 4WD Operation: Stop the vehicle, start the engine, shift into neutral, rotate the knob to H4L, and finally shift into D to drive forward. L4L, Low-Speed 4WD Operation: Stop the vehicle, start the engine, shift into neutral, rotate the knob from H4F to H4L, pause for five seconds, press the knob and rotate it to L4L, and finally shift the gear lever to L.

18

1

Share

What Does Air Cooling Mean for Motorcycles?

Air cooling and liquid cooling refer to the cooling methods of an engine. During operation, an engine generates a significant amount of heat, which needs to be cooled down. Air Cooling: This cooling method is suitable for small-displacement engines. It relies on the airflow generated by the vehicle's movement to cool the engine. The higher the speed, the greater the airflow, and the better the cooling effect. Liquid Cooling: For larger-displacement engines, airflow alone is insufficient. Therefore, water channels are installed inside the engine to cool it with flowing water. The water circulates, and there is a radiator outside the engine. The radiator's role is to cool the hot water from inside the engine with airflow before recirculating it back into the engine, preventing the engine from overheating and losing functionality. Characteristics of Air-Cooled Motorcycles: The cooling system is naturally cooled with zero failures and occupies minimal space. Characteristics of Liquid-Cooled Motorcycles: Effective temperature control for high-power, high-speed engines. In liquid-cooled motorcycles, the throttle valve closes when the temperature is low until the oil temperature rises to achieve lubrication. Differences Between Air-Cooled and Liquid-Cooled Motorcycles: The cooling methods and configurations differ. Air cooling relies on airflow from the vehicle's movement for cooling, while liquid cooling uses flowing water to envelop the cylinder liner and cylinder head for temperature reduction.

17

2

Share

What types of motion are involved in the movement of a vehicle?

The movement of a vehicle includes both rotational and translational motion. Rotation: An object moves in a circular path around a point or an axis, such as the Earth rotating on its axis while also revolving around the Sun. This corresponds to the rotation of a vehicle's wheels. Translation: In the same plane, when all points of a figure move the same distance in a straight-line direction, this type of motion is called translational motion, or simply translation. This corresponds to the physical phenomenon of the vehicle's body moving forward. Mechanical Motion: One of the most basic forms of mechanical motion is rotation. In a rotating object, all points except those on the axis of rotation move in circular paths of varying sizes around the same axis. This motion is called 'rotation.' The trajectories of all points on the rotating object are concentric circles centered on the axis. At any given moment, the linear velocity and linear acceleration of different points on the rotating object vary.

15

3

Share

Where is the license plate Ji E from?

What is NIO's waterproof rating?

What are the reasons for a CVT transmission not accelerating when the throttle is applied?

What are the reasons for the sudden power loss of Wuling Hongguang mini?

What does Toyota Prado H4F, H4L, and L4L mean?

What Does Air Cooling Mean for Motorcycles?

What types of motion are involved in the movement of a vehicle?

How to perform a hill start with an automatic transmission car?

How to Properly Use the Pedals in an Automatic Car?

How to Drive an Automatic Car Through Water?

How many seconds does it take for the Yamaha R1 to accelerate from 0 to 100 km/h?