Where is the Li ONE manufactured?

Where are Hankook Tires produced?

Hankook Tires are produced in South Korea by Hankook Tire. Automotive Tires: Automotive tires are one of the crucial components of a vehicle, directly in contact with the road surface. They work in conjunction with the vehicle's suspension to absorb shocks during driving, ensuring good ride comfort and smooth driving. Automotive Tire Precautions: Enhance awareness of tire safety by conducting regular inspections, especially before highway driving. Perform thorough checks beyond just tire pressure, including examining the tire sidewalls for cracks and assessing tread wear conditions. Address any potential hazards promptly. Regularly correct wheel balance if it exceeds standard limits.

13

0

Share

Where are the sunroof drainage outlets of the Bora located?

The Bora's sunroof has four drainage outlets, one at each of the front, rear, top, and bottom. The two rear drainage outlets are the easiest to locate, positioned beneath the chassis near the rear wheels, one on each side. The drainage holes are typically located at the edges of the sunroof, close to the windshield, with the corners serving as the drainage points. The functions of the car's drainage pipes are as follows: 1. The drainage outlets under the doors: These are often blocked when soundproofing is applied, preventing rainwater from draining out of the doors, which can lead to corrosion and rust over time. With increasing electrical components inside the doors, this blockage might also cause short circuits in the vehicle's wiring. The risk of fire makes it crucial to regularly check and clear these drainage outlets during maintenance. 2. The sunroof drainage outlets: Many people are unaware that sunroofs are not completely sealed; they have four drainage holes around the edges. If these holes get clogged, water can leak into the interior, potentially damaging the headliner or even flooding the cabin. It's essential to clean the sunroof drainage outlets promptly. 3. The engine drainage outlet: This is located beneath the front windshield, directing rainwater straight to the undercarriage and preventing it from entering the engine compartment.

18

4

Share

What are the differences between the Cayenne Coupe and the regular Cayenne?

The differences between the Cayenne Coupe and the regular Cayenne are mainly reflected in the exterior styling, body dimensions, and vehicle configurations. The Cayenne Coupe is Porsche's first coupe-style SUV model, which is slightly longer and lower in height compared to the regular model. The Cayenne Coupe comes with additional features such as the Sport Chrono package, an automatically rising rear spoiler, a panoramic sunroof (non-opening, with an optional carbon fiber roof), Porsche Active Suspension Management (PASM), and an upgraded speed-sensitive power steering system. The dashboard of the Cayenne Coupe features a digital display. Its dimensions are 4939mm in length, 1989mm in width, and 1653mm in height. The Cayenne Coupe boasts a maximum horsepower of 340ps and a maximum torque of 450nm. It has a fuel tank capacity of 75 liters and is equipped with 275/45-R20 wheels, achieving a 0-100km/h acceleration time of 5 seconds. In comparison, the regular Cayenne measures 4931mm in length, 1983mm in width, and 1676mm in height. It has a 0-100km/h acceleration time of 5.2 seconds. The dashboard of the regular Cayenne features a five-gauge layout. It offers a maximum horsepower of 251ps and a maximum torque of 370nm. The fuel tank capacity is 90 liters, and it comes with 275/50-R19 wheels.

10

4

Share

Why Should You Wait for the Engine Temperature to Rise Before Driving?

Because low engine temperature increases engine wear, there should be a warm-up process after a cold start. Engine Introduction: An engine is a machine that converts other forms of energy into mechanical energy. It can refer to either a power-generating device or the entire machine, including the power unit. Hazards of an Overly Cold Engine: The temperature of the air-fuel mixture entering the cylinders is too low, resulting in poor-quality combustible mixture, making ignition difficult or combustion slow. This leads to reduced engine power and increased fuel consumption. Water vapor in the combustion products tends to condense into water and form acids with acidic gases, intensifying corrosion on the engine body and components.

18

1

Share

Is it serious to have only 1 point left after deducting 11 points from the driver's license?

Having only 1 point left on your driver's license does not affect its use, and you can still drive on the road. Just be careful not to violate any more traffic rules. When the scoring cycle ends and all fines are paid, your license will naturally be restored to 12 points. Below is some information about the driver's license test: 1. Subject 1: Road traffic safety laws, regulations, and related knowledge test. It's a written test, answered on a computer, with a full score of 100. A score of 90 or above (including 90) is considered passing. 2. Subject 2: Field driving skills test, conducted in a real vehicle on a closed course. It's only graded as pass or fail. It includes five mandatory tests conducted in sequence: reversing into a garage, parallel parking, S-curve driving, right-angle turning, and hill start and stop. The full score is 100, and a score of 80 or above (including 80) is considered passing. 3. Subject 3: Road driving skills test, conducted on a real road or simulated course. The full score is 100. For large buses, a score of 90 or above is passing; for large trucks, 80 or above; and for other vehicle types, 70 or above is passing. 4. Subject 4: Safe and civilized driving knowledge test. It's a written test with a full score of 100, and a score of 90 or above (including 90) is considered passing.

7

5

Share

What is the boost pressure of a factory turbocharger?

Generally, the boost pressure of a factory turbocharger is 0.4 BAR. Introduction to Turbochargers: A turbocharger is a fan in the engine of a car or aircraft that improves engine performance by using exhaust gases to blow fuel vapor into the engine. It is a type of rotary power machinery that converts the energy of a flowing working medium into mechanical work. Advantages and Disadvantages of Turbochargers: Without changing the engine displacement, a turbocharged engine can significantly increase the engine's power and torque. However, the components inside a turbocharged engine often operate in high-temperature and high-impact environments, so such engines have special requirements for engine oil, which must have good wear resistance, high-temperature resistance, fast lubrication film formation, high film strength, good stability, and low viscosity.

2

1

Share

Where is the Li ONE manufactured?

Where are Hankook Tires produced?

Where are the sunroof drainage outlets of the Bora located?

What are the differences between the Cayenne Coupe and the regular Cayenne?

Why Should You Wait for the Engine Temperature to Rise Before Driving?

Is it serious to have only 1 point left after deducting 11 points from the driver's license?

What is the boost pressure of a factory turbocharger?

Can you get a driver's license at 16?

How many kilometers should Corolla brake pads be replaced?

What are the dimensions of the Fista car?

How is the ETC toll calculated on highways now?