Where is the Li Auto produced?

1 Answers
Rose
07/30/25 1:09am
Li Auto is produced at the Changzhou manufacturing plant. Taking the Li ONE as an example, it is a pure electric mid-to-large-size SUV under the Li Auto brand. It is equipped with a permanent magnet synchronous motor, delivering a maximum horsepower of 327 PS, a maximum torque of 530 Nm, and a maximum power of 240 kW. The drive system features dual motors with a dual-motor four-wheel drive configuration, and the battery type is a ternary lithium battery. The Li ONE has the following body dimensions: length 5020 mm, width 1960 mm, height 1760 mm, a wheelbase of 2935 mm, a minimum ground clearance of 180 mm, and a body weight of 2300 kg.
Was this review help?
10
1
Share
More Forum Discussions

Where is the MINI cabin air filter located?

MINI cabin air filter is located behind the glove box (storage compartment) on the passenger side. If you need to replace the MINI cabin air filter, here are the steps: 1. Properly remove the glove box: Locate the screws securing the glove box to the dashboard around its perimeter and unscrew them one by one. 2. Locate the cabin air filter: After removing the glove box, find the cabin air filter, which is generally positioned at the lower left side. Carefully remove it once located. 3. Replace the cabin air filter: After taking out the old filter, install the new cabin air filter. Note: Be sure to purchase genuine cabin air filters from authorized channels, as genuine filters will have manufacturing dates marked on them.
14
1
Share

Does the Jetta VS5 have front and rear anti-collision beams?

Jetta VS5 has front and rear anti-collision beams. The front anti-collision beam is located behind the foam layer of the front bumper, while the rear anti-collision beam does not have foam, which serves an energy-absorbing function. Here is some information about the front and rear anti-collision beams: 1. The anti-collision beam is not actually meant to 'prevent collisions'; its main function is to transmit force. 2. When the vehicle is hit from the front or rear, if the force is applied to the anti-collision beam, the beam can transfer the impact force to the parts where it connects to the vehicle body—usually the beam and the longitudinal beams (sometimes the rear body underframe in the case of the rear). Between the beam and the longitudinal beams, there is typically a small energy-absorbing box structure.
16
4
Share

What is the driving principle of the Accord Hybrid?

Accord Hybrid driving principle: The 2.0-liter gasoline engine drives the generator to produce electricity, which is then used for the electric motor. At this time, the vehicle is driven solely by the electric motor. Here are some introductions about the Accord Hybrid drive: 1. The Accord hybrid system has three driving modes: pure electric, hybrid, and internal combustion engine drive. 2. In electric mode, the motor obtains energy from the lithium battery pack and drives the vehicle alone, with a maximum speed of 60 mph. The maximum driving range is not high. Once the battery energy is exhausted, it automatically switches to hybrid mode.
9
3
Share

What is the principle of Toyota hybrid?

Toyota hybrid principle: During the most fuel-consuming phases of the gasoline engine, such as starting and re-acceleration, an electric motor is used to provide additional power to the transmission, thereby reducing the engine's load during these stages and achieving fuel efficiency. Below is some information about Toyota hybrid: 1. Toyota hybrid technology has been developed and innovated for 20 years, with over 300 technology patents and more than 45 models equipped (including Lexus). 2. Especially its flagship product, the all-new eighth-generation Camry, the first model under the TNGA architecture, adopts a new 2.5L dual-injection engine under TNGA, featuring ultra-high compression ratio, more complete combustion, stronger power, and lower fuel consumption. It is also the first in the world to adopt high-speed combustion and laser-clad intake valve seat technologies, making it the most advanced naturally aspirated engine globally.
3
2
Share

Where is the Kia Soul's cabin air filter located?

Kia Soul's cabin air filter is located behind the glove box on the passenger side. The functions of the cabin air filter are as follows: 1. It ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin. 2. It separates solid impurities such as dust, pollen, and abrasive particles from the air. 3. It adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air, with strong and long-lasting moisture adsorption. 4. It prevents the car windows from fogging up, ensuring clear visibility for drivers and passengers and safe driving; it provides fresh air to the cabin, preventing occupants from inhaling harmful gases and ensuring driving safety; it effectively sterilizes and deodorizes. 5. It maintains clean air in the cabin, preventing bacterial growth and creating a healthy environment; it effectively separates solid impurities such as dust, filter powder, and abrasive particles from the air; it effectively intercepts pollen, ensuring that drivers and passengers do not experience allergic reactions that could affect driving safety.
6
0
Share

How to turn off the radio in the Volkswagen New Sagitar?

Volkswagen New Sagitar radio on and off methods are as follows: 1. Turn on: The FM/AM button in the upper left corner of the Volkswagen Sagitar screen is the radio switch. Press it with your hand to turn on the radio screen. 2. Turn off: If you want to turn off the radio, find the previous radio switch button, then press this button with your hand to turn it off. 3. Frequency adjustment: The radio frequency can be adjusted via the knob or screen buttons. When the radio is on, find the car radio's on switch, click the "Settings" option button on the right to make relevant settings.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.