Where is the Lexus rearview mirror heating button located?

1 Answers
AuroraFitz
07/30/25 12:00am
The Lexus rearview mirror heating button is located on the center console panel, below the hazard light button. The rearview mirror heating switch for the Lexus NX is a three-position rotary knob, corresponding to the left rearview mirror, rearview mirror heating, and right rearview mirror. Turning the Lexus NX's rearview mirror option to the heating position sets it to "auto mode," activating the car's automatic heated rearview mirror function. Rearview mirror heating is particularly useful in rainy or snowy weather. When activated, the heater behind the mirror quickly warms the surface, gradually removing rainwater or fog, eliminating the need for the driver to frequently wipe the mirrors manually, thereby reducing driving hazards. How to use the rearview mirror heating function: There are generally two ways to activate the rearview mirror heating function. One is combined with the electric rearview mirror adjustment button—simply rotate the knob to turn it on. The other is located on the air conditioning control panel—press the heating button to activate it. No manual angle adjustment is needed, as the driver's side has a dedicated adjustment button. Principle of the rearview mirror heating function: After pressing the button, the electric heater behind the rearview mirror glass rapidly heats up to a fixed temperature (usually between 35-60°C) within minutes. The heat is then distributed across the left and right rearview mirrors. As the temperature rises and evaporates, water droplets on the mirror surface shrink, and fog gradually disappears, effectively defrosting and dehumidifying the mirrors. However, in heavy rain, its effectiveness may diminish and become less noticeable. Precautions for using the rearview mirror heating function: The heating function relies on electric heating wires embedded in the mirrors, which consume significant power. Ensure the car is running when using this feature to avoid draining the battery, which could prevent the car from starting. Other methods for defogging rearview mirrors include: Opening windows slightly to allow air convection between the inside and outside of the car, reducing the temperature difference and gradually eliminating fog. Adjusting the car's air conditioning to the appropriate setting to blow warm air for defogging.
Was this review help?
2
5
Share
More Forum Discussions

What are the water-cooled scooters available?

Water-cooled fuel-injected models mainly include the Qianjiang Silver Blade, CFMOTO Jie Ma, and some scooters from Qingqi Peugeot, predominantly joint-venture brands. Below are the relevant details: 1. Advantages of water-cooled models: Compared to air-cooled models of the same displacement, water-cooled scooters offer more powerful performance, especially noticeable during prolonged operation. They also provide a more stable ride, maintaining composure even at speeds up to 90 km/h without feeling floaty. 2. Air-cooled fuel-injected models: Scooters in this category include the Wuyang-Honda Ruifeng, Sabre, U-Ke, U-Yue 110, U-Cool, Joy fuel-injected versions, Yamaha Cygnus fuel-injected version, Qingqi Suzuki Fengcai as well as Ruicai, Licai, and Yuncai fuel-injected versions, Haojue Tianlongxing and Neptune, Hongbao, Tianyu, Tianying, Yuzuan fuel-injected versions, and Kymco Like fuel-injected version.
16
1
Share

What time does the Subject 3 test start in the morning?

Subject 3 test usually starts at 8:00 in the morning. Here is the relevant information: Subject 3 test instructions: The test usually starts at 8:00 in the morning. Candidates are randomly grouped by computer, with four people in each group; each group goes to the test site to be checked by the examiner, submit identification documents, and verify their identity; board the vehicle in order and take the test; drive according to the route instructed by the examiner, and the routes may vary in different test locations. Introduction to Subject 3 test: Subject 3 includes the road driving skill test and the safety and civilized driving knowledge test. It is part of the motor vehicle driver's license assessment and is the abbreviation for the road driving skill and safety and civilized driving knowledge test in the motor vehicle driver's test. The content of the road driving skill test varies for different types of vehicles.
15
3
Share

What are the reasons for the high fuel consumption of the Elantra?

The high fuel consumption of the Elantra can be attributed to the following 4 reasons: 1. Insufficient tire pressure or severe tire wear: Tires are relatively easy to check, so they should be inspected first. If the tire pressure is insufficient, fuel consumption will increase; if the tire pressure is normal, then the degree of tire wear can be checked. Severe tire wear often leads to slipping, which also increases fuel consumption. 2. Excessive carbon deposits in the car engine: This can cause higher fuel consumption, and it is likely due to the use of substandard fuel. 3. Damage to the oxygen sensor in the internal control unit: The oxygen sensor primarily monitors the fuel-air ratio in the engine. Once it is damaged, it will cause an imbalance in the fuel-air ratio, leading to abnormally high fuel consumption. 4. Malfunction in one of the engine control units: If one of the control units fails, it can significantly increase fuel consumption, accompanied by poor performance and thick black exhaust emissions.
1
5
Share

What brand of tires does the Lynk & Co 03 use?

Lynk & Co 03 is equipped with well-known tire brands such as Goodyear and Continental. Below is some relevant information about the Lynk & Co 03: The Lynk & Co 03 is the first sedan product under the Lynk & Co brand and the first sedan built on the CMA (Compact Modular Architecture) platform. The Lynk & Co 03 was officially launched on October 19, 2018, at the Fuji Speedway in Japan. It is positioned as a trendsetting sports sedan, available in six models with three design styles: Pure, Pro, and Sport. The Lynk & Co 03 is also the brand's first high-performance model, which debuted at the 2019 Shenzhen-Hong Kong-Macao International Auto Show on June 1, 2019, and was officially launched on August 2, 2019. Marked with a "+" symbol, it enhances the brand's sportiness, exclusivity, and craftsmanship through design, power, and handling.
7
0
Share

What is the power of a car air conditioner?

The power of a car air conditioner ranges between 1000W and 5000W. Different cars have different power ratings. For every 1 ton of refrigeration capacity obtained, the car air conditioner consumes 2 horsepower. To save space in the car, the condenser of the car air conditioner is usually designed to be smaller, and the operating environment temperature is relatively high. Therefore, to achieve the same cooling capacity, the car air conditioner inevitably consumes more power than a household air conditioner. Below is an introduction to air conditioner maintenance: 1. Comprehensive inspection of the air conditioner: When using the air conditioner for the first time in summer, you should first check the air conditioning system, such as checking the refrigerant and whether the air filter is too dirty through the liquid storage tank, and whether there are any foreign objects in the radiator. 2. Pay attention to the cleaning of the air conditioner: The air filter should be replaced regularly, otherwise the air conditioner will produce a musty smell. In addition, the condenser should also be cleaned regularly, and the water tank should be removed for thorough cleaning.
4
4
Share

What are the benefits of cleaning the interior of car air conditioning ducts?

The benefits of cleaning the interior of car air conditioning ducts are as follows: 1. Enhanced Cooling: After cleaning with specialized cleaning agents, the air conditioning system becomes dust-free and unobstructed, allowing for smooth airflow exchange and significantly improved cooling performance. 2. Health Benefits: Cleaning with specialized agents not only greatly reduces the likelihood of "air conditioning syndrome" but also purifies the indoor air and eliminates unpleasant odors produced by the air conditioning system. 3. Extended Air Conditioning Lifespan: After cleaning, the working environment of the air conditioning system improves, extending its lifespan and restoring it to a like-new condition. 4. Reduced Power Consumption: Cleaning improves the air conditioning system's working environment, enhancing efficiency and thereby reducing power consumption. 5. Cost Savings: Regular cleaning and maintenance lower the failure rate and power consumption of the air conditioning system, leading to indirect cost savings.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.