Where is the Lexus ES rearview mirror heating button?

2 Answers
VanIsabelle
07/28/25 7:28pm
The Lexus ES rearview mirror heating button is located on the center console panel, below the hazard light button. Here is the relevant information: 1. Function: Maintains clear rearview mirrors during rainy or foggy conditions. When driving in fog, rain, or snow, accumulated fog, frost in winter, or rainwater can obstruct the driver's view of the side and rear areas. 2. Features: The Lexus NX rearview mirror heating switch has three rotary positions: left rearview mirror, rearview mirror heating, and right rearview mirror. Turning the Lexus NX rearview mirror option to the rearview mirror heating position sets it to "auto mode," and the car's automatic heated rearview mirror function will activate.
Was this review help?
10
2
Share
VonHarmony
08/12/25 12:31am
Speaking of the rearview mirror heating button on the Lexus ES, I remember spending quite some time looking for it when I first drove this car. Usually, it's not a standalone button but integrated with the rear window defogger function. If you look at the row of buttons in the air conditioning control area on the center console, the one with an icon resembling a small house or a rectangular frame with wavy lines, labeled "REAR," is the one. Pressing this button automatically activates the rearview mirror heating, which is particularly useful in rainy or snowy weather to quickly clear fog and ensure driving safety. I recommend checking the vehicle's user manual to confirm the specific icon, as there might be slight variations between different model years—my 2018 model has it in the left button area. It's good practice to regularly check the button to avoid aging or malfunction. If it stops working, you might need to check the fuse or wiring. In short, the operation is super simple—just a gentle press.
Was this review help?
16
1
Share
Expand All
More Forum Discussions

What is the function of the button on the gear shift of the Buick Excelle?

The shift button is equivalent to the clutch of a manual transmission. The following are specific details about the Excelle: 1. Body dimensions: Its body length, width, and height are 4609mm, 1798mm, and 1486mm respectively, with a wheelbase of 2640mm, a fuel tank capacity of 44 liters, and a body weight of 1285kg. 2. Powertrain configuration: The 2021 automatic light hybrid entry-level Excelle features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.3t turbocharged engine, delivering a maximum horsepower of 163ps, a maximum power of 120kw, and a maximum torque of 230nm, paired with a 6-speed automatic manual transmission.
16
0
Share

Are CR2025 and CR2016 interchangeable?

If there are no special requirements for the product, CR2025 and CR2016 can be used interchangeably. The difference between CR2016 and CR2025 lies in the battery size, capacity, and usage duration. The thickness of CR2025 and CR2016 is different: Different thicknesses require different battery slots. The thickness of the CR2016 battery is 1.6mm; the thickness of the CR2025 battery is 2.5mm. The capacity of CR2025 and CR2016 is different: Different capacities meet the varying requirements of electronic products for battery capacity; the nominal capacity of the CR2016 battery is 75mAh; the nominal capacity of the CR2025 battery ranges from 140-170mAh.
16
2
Share

What happens when the speed and gear of a manual transmission do not match?

When the speed and gear of a manual transmission do not match, the car may be fine for a short time, but prolonged operation can accelerate wear on mechanical components and lead to premature damage to the engine and transmission. Shifting without passing through neutral: Shifting into second gear without passing through neutral causes the computer to still think it is in first gear. Driving at second gear speed under this condition makes the computer perceive a mismatch between the first gear speed and the actual speed, leading to an assumption of mismatched RPM. Clutch pedal not fully depressed: If the clutch pedal is not fully depressed during gear shifting, shifting to a higher gear and increasing speed will result in the sensor not receiving the gear shift signal, causing it to assume the transmission is still in the lower gear.
13
4
Share

What happens if too much transmission fluid is added?

Adding too much transmission fluid can cause the following symptoms: 1. The automatic transmission may leak oil. If the transmission fluid level is too high, the rotating components will come into contact with the fluid during operation. Under the high-speed stirring of components such as planetary gear sets or clutches, the fluid may expand and boil, causing it to leak out from the filler hole and vent valve. 2. It can cause gear shift shock. Excessive air entering the fluid can also lead to air blockage in the drain holes of the control valve body, resulting in poor drainage and causing gear shift shock. 3. It can result in low working oil pressure. If the transmission fluid level is too high, the rotating components will stir the fluid, creating bubbles. When this aerated fluid enters the oil pump, the pump cannot establish the required oil pressure.
9
3
Share

Is Tire Pressure Monitoring Useful?

Monitoring tire pressure is highly necessary. Tires are the only components of a car that come into contact with the ground, and both driving force and braking force originate from the tires. Tire pressure monitoring helps ensure that tires are in their optimal condition. The main functions of tire pressure monitoring include: 1. Detecting air leaks in advance and preventing tire blowouts, which is crucial for driving safety. 2. Maintaining consistent pressure in all four tires to prevent the car from pulling to one side and ensuring even braking. If driving with insufficient tire pressure, a 10% drop in tire pressure below the normal value can reduce tire lifespan by 15%. 3. Reducing fuel consumption—tests show that when tire pressure is 30% below the standard value, fuel consumption increases by 10%. 4. Avoiding abnormal wear and prolonging the service life of tires.
7
0
Share

How many days in advance can a driver's license be renewed?

Driver's license renewal can be processed three months in advance, that is, within 90 days before the expiration date. Below are the precautions to note when handling the renewal: 1. Before renewal, ensure all violations are handled, fines are paid, and points are cleared. Otherwise, the vehicle management office will not issue the new license. 2. If during the validity period of the driver's license, any scoring cycle accumulates 12 points, the license cannot be renewed with a longer validity period. 3. If the driver's license has expired for less than one year, the renewal can still be processed through the normal procedure. If the license has expired for more than one year but less than three years, the license will be canceled, but renewal can still be processed by passing the subject one exam. If it has expired for more than three years, the license will be invalid and cannot be renewed.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.