···
Log in / Register

Where is the Lexus Air Conditioning Filter Located?

3 Answers
DavidLynn
07/29/25 1:49pm
Lexus air conditioning filter is located on the left side of the engine compartment. The air filter box is secured by clips and can be opened by hand to reveal the air conditioning filter. Functions of the car air conditioning filter: 1. Provide fresh air: It prevents the car windows from fogging up, ensuring clear visibility for the driver and safe driving; it supplies fresh air to the passenger compartment, preventing occupants from inhaling harmful gases and ensuring driving safety; it effectively sterilizes and deodorizes. 2. Ensure safety and hygiene: It keeps the air in the passenger compartment clean and free from bacterial growth, creating a healthy environment; it effectively separates solid impurities such as dust, powder, and grinding particles from the air; it effectively intercepts pollen, ensuring that drivers and passengers do not suffer allergic reactions that could affect driving safety. 3. Adsorb harmful substances: It adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air; it has strong and durable moisture adsorption capabilities. 4. Filter solid impurities: The car air conditioning filter fits tightly against the housing, ensuring that unfiltered air does not enter the cabin. It separates solid impurities such as dust, pollen, and grinding particles from the air.
Was this review help?
11
5
Share
Gomez
08/13/25 5:08am
I've changed the air conditioning filter several times on my own Lexus, which is located right behind the glove box on the passenger side. You open the glove box in front of the passenger seat, and there are plastic clips on both sides. Gently press them with your fingers, and once the clips are released, you can pull out the entire glove box. Then, you'll see a rectangular plastic cover. Push it open with some force or unscrew the small screws, and the air conditioning filter will be exposed. Be careful not to scatter dust when removing the old filter, and make sure to align the airflow direction arrow when inserting the new one. The whole process takes no more than 10 minutes and requires no professional tools. I recommend changing it every six months to a year, especially in cities with poor air quality, as a dirty filter can cause a musty smell in the car and even headaches after long drives. The location is similar across different Lexus models like the ES or RX. DIY saves money and hassle—just compare with an online picture and you're good to go.
Was this review help?
15
1
Share
Expand All
VanElliana
10/10/25 5:26am
Over the years of driving my Lexus, I've discovered that the cabin air filter is hidden behind the glove compartment on the passenger side. Whenever I notice weak airflow or unpleasant odors from the AC, it's time to check if the filter is clogged. The replacement process is quite simple: clear out all items from the glove compartment, gently pull it out to reveal the filter housing, then lift the cover to remove the old filter and install a new one. Remember to wear gloves to avoid getting dirty. Timely replacement of the cabin air filter keeps the car interior fresh, making rides more comfortable for family members, especially benefiting children's respiratory systems. It's best to replace it annually - don't wait until summer AC use to rush the job. Developing this maintenance habit makes driving more pleasant and safer.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

What is the function of a car air conditioner ionizer?

Car air conditioner electromagnetic clutches can be used to control mechanical start-up, reverse, speed regulation, and braking. The following is an introduction to related content: 1. Composition: Common car air conditioner electromagnetic clutches consist of a clutch pressure plate, a belt-driven rotor, and an electromagnetic coil. There are two types of electromagnetic clutches: fixed coil type and rotating coil type. The former has an electromagnetic coil fixed on the compressor housing and does not rotate, while the latter has an electromagnetic coil connected to the belt pulley and rotates with it. 2. Principle: The electromagnetic clutch is also known as an electromagnetic coupling. It applies the principle of electromagnetic induction and the friction between inner and outer friction plates to enable two rotating components in a mechanical transmission system to engage or disengage without stopping the rotation of the driving component. It is an automatically operated electromechanical connector.
5
0
Share

How to Measure the Condition of a Car Battery?

Introduction to methods for testing car battery condition: Use a battery tester or multimeter to measure the battery voltage. Under normal circumstances, the no-load voltage of the battery should be around 13 volts, the full-load voltage should not be lower than 12 volts, and the starting voltage should not drop below 9.5 volts. Additional information: 1. If white or greenish powdery crystalline deposits are found on the battery electrodes: Clean the electrodes promptly with a wire brush and a sodium bicarbonate solution to ensure good contact between the electrodes and cables. 2. Check if the battery is securely fastened in the battery tray: If it is loose, tighten the mounting bolts, as excessive shaking can shorten the battery's lifespan. 3. Regularly check if the electrolyte level in the battery is decreasing: If necessary, top up with distilled water, but do not overfill. The normal liquid level should reach the bottom of the filler hole. 4. Check if the battery cables are tightly connected to the electrodes: Loose connections may prevent the car from starting. 5. Carefully inspect the battery casing: If there are cracks in the battery, replace it promptly to prevent leakage of corrosive electrolyte.
10
5
Share

How many points are deducted for stalling at startup?

During the driving test, if the engine stalls due to improper operation, 10 points will be deducted for each stall. Below is an introduction to the relevant content of Subject 2: 1. Test requirements: The requirement for parallel parking is that the driver must park the vehicle in the right parking space without the wheels touching the lane boundary or the parking space boundary. 2. Assessment content and requirements for Subject 2: The five assessment items are reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curved road. Subject 2 requires 26 class hours, of which 2 hours are theoretical knowledge, so the actual practical training is 24 hours.
7
5
Share

What are the roles and functions of an automotive fresh air system?

Here are the roles and functions of an automotive fresh air system: 1. Role of the fresh air system: The fresh air system refers to a specialized device that filters outdoor fresh air and delivers it indoors while simultaneously expelling indoor polluted air outdoors. This achieves system balance and replaces the air in the compartment, creating a scientific air convection in a confined space, effectively adding a respiratory system to the vehicle. 2. Functions of the fresh air system: Ventilation function supplies fresh air needed for breathing; deodorization function quickly removes unpleasant odors caused by various factors; dust removal function expels floating dust and bacteria from the indoor air; moisture removal function effectively eliminates problems caused by humidity such as condensation, mold, and decay; and it also helps regulate indoor temperature.
17
5
Share

Is it easy to repair a car air conditioner leaking refrigerant?

Car air conditioner leaking refrigerant is relatively easy to repair. Here are the specific methods for repairing a car air conditioner refrigerant leak: 1. Welding repair: After identifying the leakage point, welding can be used to repair cracks or pinholes in the air conditioning pipes. If the pipe cannot be repaired, it must be replaced. 2. Vacuum exhaust: After confirming that the repaired air conditioning pipe no longer leaks, vacuum exhaust must be performed. This involves removing all gas and moisture from the air conditioning pipeline. 3. Recharge refrigerant: After vacuum exhaust of the air conditioning pipeline, recharge the refrigerant.
12
0
Share

Why does the car air conditioner cool slowly after being exposed to the sun?

The reason why the car air conditioner cools slowly after being exposed to the sun is that the compressor protection device trips. Here is more relevant information: 1. Reasons and solutions for high pressure and overheating: (1) Too much refrigerant. Appropriately reduce the amount of refrigerant. (2) Poor heat dissipation. Check if the condenser tube is dirty and clean the condenser. (3) Blockage in the pipeline system. Refer to the pressure gauge to judge and eliminate, then reprocess the system. (4) Dust and scale accumulation on the evaporator or filter. The airflow becomes smaller, and the system pressure and temperature become unbalanced. Clean the evaporator or filter. (5) Lack of fluorine is also possible. When there is a lack of fluorine, the compressor exhaust temperature will overheat, causing the overload protection switch to trip. 2. Problems with the circuit: (1) Control circuit board failure. (2) Temperature sensor overload, incorrect information. (3) Loose or poor contact of power wiring. (4) The starting capacitor or compressor starting coil is burnt out.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.