···
Log in / Register

Where is the Lavida nameplate located?

1 Answers
McElle
09/05/25 8:06am
Lavida nameplate is located under the hood, inside the engine compartment, on the plastic cover of the left bumper near the engine. The Lavida's body dimensions are: length 4670mm, width 1806mm, height 1474mm, with a wheelbase of 2688mm and a fuel tank capacity of 51 liters. The Lavida is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 83kW at 6000rpm and a maximum torque of 45Nm at 3900rpm. It is paired with a 7-speed dual-clutch transmission. The front suspension adopts MacPherson strut independent suspension, while the rear suspension uses torsion beam non-independent suspension.
Was this review help?
9
2
Share
More Forum Discussions

What is the method to reset the tire pressure light on the Peugeot 408?

The method to reset the tire pressure light on the Peugeot 408 is: 1. Turn on the ignition switch and long-press the tire pressure monitoring reset button; 2. Release the button after hearing a beep sound. At this point, the tire pressure monitoring system will store the current normal tire pressure data, automatically clear the original data, and the tire pressure light will be eliminated. The Peugeot 408 is a compact car produced by Dongfeng Peugeot, with body dimensions of 4750 mm in length, 1820 mm in width, and 1488 mm in height, and a wheelbase of 2730 mm. The Peugeot 408 is equipped with a 1.2L turbocharged engine, paired with a 6-speed dual-clutch transmission and a 6-speed AT transmission. It has a maximum horsepower of 136 hp, a maximum power of 100 kW, a maximum power speed of 5500 rpm, a maximum torque of 230 Nm, and a maximum torque speed range of 1750 to 3500 rpm.
11
0
Share

What is the reason for the constant illumination of the right front turn signal on the Volkswagen Sagitar?

The reasons for the constant illumination of the right front turn signal on the Volkswagen Sagitar: damage to the turn signal lever switch, wiring damage, water ingress in the wiring, short circuit. Function of turn signals: Turn signals are controlled by electronic devices, but they still use audio to simulate the sound of a relay. They are activated when the motor vehicle is turning to alert the driver that the turn signal is flashing and to draw the attention of vehicles in front, behind, and to the sides, as well as pedestrians, as an important indicator light. Types of turn signals: They can mainly be divided into three types: resistance wire type, capacitor type, and electronic type. Among them, the resistance wire type can be further divided into hot wire type (electrothermal type) and vane type (bounce type), while the electronic type can be divided into hybrid type (with contact-type relays and electronic components) and fully electronic type (without relays).
18
0
Share

Are the Engines of the Regal and Roewe the Same?

The engines of the Regal and Roewe are the same. Introduction to the Engine: An engine is a machine that can convert other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. For example, internal combustion engines usually convert chemical energy into mechanical energy. The term 'engine' can refer to both the power generation device and the entire machine that includes the power device. Methods to Check the Engine Model: The engine model is generally marked on the valve cover. Of course, the specific markings vary with different models. The first digit indicates the number of cylinders, and the following digits represent the cylinder diameter. The letters have three meanings: cylinder arrangement—no symbol means in-line, 'V' means V-type cylinder arrangement, and 'P' means horizontal; cooling and supercharging—no symbol means water-cooled, 'F' means air-cooled, 'N' means condensation-cooled, and 'Z' means supercharged; purpose code—'T' for tractors, 'M' for motorcycles, 'G' for construction machinery, 'Q' for vehicles, and 'D' for generator sets.
10
3
Share

Where is the Honda fuel tank cap switch located?

For most Honda models, the fuel tank cap switch is located below the left A-pillar on the driver's side, marked with a fuel pump symbol. Simply pull the switch outward to open it. Some models allow the fuel tank cap to pop open by pressing it when the car is unlocked. There are primarily three methods to open the fuel tank cap: Mechanical key opening, which is more complex and thus rarely used in household vehicles today, though it is more common in rugged SUVs. In-car switch button, a more convenient and currently prevalent method compared to the mechanical key, but it may lead to refueling while the engine is still running, requiring extra caution. Direct press opening, the most convenient of the three methods, requiring no action from the driver, allowing the fuel attendant to refuel directly. If the fuel tank cap fails to open, it is usually due to a malfunction in the mechanical cable connected to the cap, often caused by rust or jamming from prolonged vehicle use. Applying grease can lubricate and resolve such issues. In emergencies, an emergency switch can be used to open the fuel tank cap, typically located behind the trim panel near the fuel tank cap in the trunk. Removing the panel allows for emergency access to open the fuel tank cap.
6
5
Share

What is the fuel tank capacity of the Magotan 330?

The fuel tank capacity of the Magotan 330TSI DSG is 66 liters, as officially announced. Owners of the Magotan 330TSI DSG can also check this information on the vehicle's configuration sheet. The recommended fuel grade for the Magotan 330TSI DSG is 95 octane, with a fuel consumption of 6.3L per 100 km. A full tank can cover a distance of approximately 1,047 km. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel midway. During actual refueling, the amount of fuel added may exceed the marked capacity. This is because the manufacturer's specified fuel tank capacity is measured from the bottom of the tank to the safe fill level, leaving some space between the safe fill level and the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is filled up to the tank opening, the actual refueling amount may exceed the marked capacity.
6
3
Share

What is the Difference Between 95 and 92 Octane Gasoline?

The difference between 95 and 92 octane gasoline lies in their composition: 92 octane gasoline consists of 92% isooctane and 8% n-heptane, while 95 octane gasoline consists of 95% isooctane and 5% n-heptane. Precautions for refueling include: 1. Choose to refuel when the temperature is relatively low; 2. If the car is not used for a long time or used infrequently, keep the fuel level low; 3. Avoid refueling when a tanker truck is unloading fuel; 4. Turn off the engine when refueling a gasoline car. Long-term mixing of different octane ratings can affect the lifespan of the car's ignition system, fuel injectors, and spark plugs. The components of a fuel tank include: fuel tank cap, baffle, fuel gauge sensor, fuel supply and return pipes, fuel filler neck, and vent. The function of the fuel tank is to store the working fluid required by the hydraulic system, as well as to dissipate heat, settle impurities, and separate air bubbles from the liquid.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.