Where is the largest used car market in Ningbo?

1 Answers
SanRebecca
07/30/25 12:15am
The largest used car market in Ningbo is the Tuzhong Automobile Trade City located in the Guling section of Yinxian Avenue, covering an area of over 80,000 square meters. A used car market is a place for the secondary circulation of motor vehicle commodities, possessing the dual attributes of an intermediary service provider and a commodity operator. Specifically, the functions of a used car trading market include: used car evaluation, purchase, sales, consignment, replacement, auction, transfer, registration, licensing, insurance, and other services. Here are methods to check if a used car has been in an accident: 1. Check the production date of the glass: Normally, the glass would not be replaced, so checking the production date can be helpful. The glass date is usually in the form of numbers + dots, where the numbers represent the year and the dots represent the month. 2. Examine the wear and tear on the frame: If the car has been involved in a major accident, the body frame will show varying degrees of dents and misalignment. Therefore, the extent of wear on the frame can indicate whether the car has been in a major accident. 3. Inspect the screws: Check the screws on the hood, the radiator support, and the door connections. If any of these screws show abnormalities, it is highly likely that the car has been in a major accident. 4. Review the maintenance records: You can check the maintenance records at a 4S shop. Any accident car repaired at a 4S shop will have systematic records in their system.
Was this review help?
20
1
Share
More Forum Discussions

The Difference Between Torsion Beam and Independent Suspension

Independent suspension has the advantages of being lightweight, reducing the impact on the vehicle body, and improving the ground adhesion of the wheels; the torsion beam's advantages are its simple structure, ease of maintenance, and high strength to withstand external collisions. More related information is as follows: 1. Advantages: Independent suspension means that the wheels on each side of the car are individually suspended under the frame or body through an elastic suspension system. Its advantage is that the wheels on both sides can move independently without interfering with each other, reducing the tilt and vibration of the body, which is beneficial to the smoothness and handling stability of the car, improving the ride comfort. 2. Configuration: Depending on the structural form, independent suspension systems can be further divided into MacPherson strut, double wishbone, multi-link, and torsion bar types. Among these independent suspensions, the MacPherson suspension is the most flexible and versatile, with many variants and the widest application.
7
0
Share

Can Shanxi National V Vehicles Still Be Registered?

Shanxi National V vehicles cannot be registered. Below are the relevant regulations for Shanxi National V: 1. Regulations: Shanxi implemented the National VI standard starting from July 1, 2019, and simultaneously stopped the registration of National V vehicles. However, according to the regulations of various provinces and cities, there will be at least a one-month transition period. 2. Requirements: For vehicles purchased before July 1, 2019 (excluding that date, based on the date of the purchase invoice) or transferred into the province from other provinces and cities (based on the transfer registration date on the motor vehicle registration certificate) that meet the National V emission standards, the traffic management department of the public security authority can handle the vehicle registration procedures within one month after the implementation date specified in this notice. Registrations will not be processed after the deadline.
13
4
Share

How to Park and Turn Off a Porsche Cayenne?

Apply the brakes to slow down and come to a complete stop; once stopped, shift into Neutral (N); engage the parking brake; release the foot brake and ensure the vehicle is stationary; then press the foot brake again and shift into Park (P). The Porsche chassis system features a unique balance mechanism, which consists of two hydraulic rotary motors with four sensors integrated into the front and rear axle active anti-roll bars. This system actively monitors tire level, body dynamics, and acceleration response during driving. A high-pressure pump generates oil pressure up to 180 bar, rapidly adjusting the vehicle's body roll during cornering and balancing the tilt angle. To turn off the vehicle, press the button located on the left side of the gear lever in the center console while the vehicle is powered on. This will deactivate the lift function. The vehicle's lift function mode refers to the suspension lowering the body height during high-speed driving to ensure stability.
17
2
Share

Why Can't the Key Turn When the Steering Wheel is Locked?

Steering wheel lock and key unable to turn occur because the steering wheel was rotated when the car was turned off, causing the steering wheel to automatically lock. This is a normal phenomenon, and the solution is very simple: just turn the steering wheel while simultaneously turning the key to start the ignition. Here are some details about steering wheel lock: 1. Cause: When the car is turned off, the vehicle has a certain self-protection function. If the steering wheel is rotated at this time, the gear latch inside the steering mechanism will be locked, making the steering wheel immovable. Additionally, the key will also be unable to turn, which is designed to prevent car theft. 2. Precautions: When parking the vehicle, always ensure it is parked on a flat surface and the handbrake is properly engaged. Avoid randomly stepping on the brake or turning the steering wheel to prevent it from being locked.
5
4
Share

How long can a 2008 car be driven?

Whether a car is scrapped is not limited by its age, but by its mileage. When the mileage reaches 600,000 kilometers, it must be forcibly scrapped. For details, see Articles 5 and 7 of the "Regulations on Compulsory Scrapping of Motor Vehicles". Cars from 2008 comply with the China III emission standards. Some local governments have corresponding policies prohibiting vehicles that meet the China III emission standards from being driven on the road. Under such circumstances, driving is not possible. First-tier cities like Beijing, Shanghai, Guangzhou, and Shenzhen have introduced corresponding purchase restriction policies. For a 2008 car to continue driving, the following conditions must be met: it must pass the annual inspection; there must be no relevant local restriction policies; and the mileage must not exceed 600,000 kilometers.
3
3
Share

What are the methods for reducing car noise?

You can install some high-end sound-absorbing foam and other materials on the engine hood, which can not only effectively suppress the vibration caused by the hood but also more effectively absorb a large amount of noise, with very noticeable results. Tire noise: Tire noise is generated when the vehicle is driving at high speed and is caused by the friction between the tires and the road surface. Generally speaking, the faster the speed, the greater the vehicle load, and the worse the road conditions, the louder the tire noise will be. Vibration is one of the main sources of tire noise. You can install vibration damping plates along with sound-absorbing pads to reduce the occurrence of vibrations. In addition, you can also try replacing tires with better noise reduction performance, also known as silent tires, which are optimized by tire manufacturers to change the tread design to reduce noise.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.