Where is the largest used car market in Chengdu located?

Can You Release the Clutch While Keeping the Brake Pressed During Start-Up?

Under normal circumstances, when the car is on a flat road, there is no need to press the brake during start-up. Therefore, there is no need to consider whether to release the clutch or the brake first; simply release the clutch to the semi-engaged position. However, during driving practice, instructors often instruct learners to press the brake for safety reasons, to prevent the car from lurching forward if the gear was not in neutral. Below is an introduction to car start-up procedures: Foot Brake Start-Up: While keeping the foot brake pressed, depress the clutch, shift into first gear, and release the clutch to the semi-engaged position. When the body of the car slightly vibrates and the front lifts, release the foot brake, and the car will start moving slowly forward. Hand Brake Start-Up: When starting with the hand brake, there is no need to press the foot brake, provided that the car is parked on a slope and the hand brake is engaged to stabilize the car. The specific operation method is: hold the steering wheel steady with the left hand, depress the clutch, shift into first gear, place the right hand on the hand brake, release the clutch to the semi-engaged point, and immediately release the hand brake, allowing the car to move forward smoothly.

19

4

Share

Does a 3-point deduction on the driver's license affect the annual vehicle inspection?

C driver's licenses do not require annual inspection. For AB driver's licenses with a 3-point deduction, annual inspection is possible, but the holder must participate in study and examination during the inspection. Vehicle inspection regulations: For passenger vehicles used for commercial purposes, inspections are required once a year within the first 5 years, and every 6 months thereafter. For trucks and large or medium-sized non-commercial passenger vehicles, inspections are required once a year within the first 10 years, and every 6 months thereafter. For small and micro non-commercial passenger vehicles, inspections are required once every 2 years within the first 6 years, once a year thereafter, and every 6 months after 15 years. Consequences of not participating in the annual inspection on time: Vehicles that do not undergo the annual inspection on time are not allowed on the road. Driving such a vehicle will result in a 3-point deduction and a fine. If an accident occurs involving a vehicle that has not undergone the annual inspection, the party involved will bear full or primary responsibility, and the insurance company will not provide compensation.

13

2

Share

Which Models Are Equipped with the BlueCore Engine?

Models equipped with the BlueCore engine include: Changan CS75 PLUS, Changan CS35 PLUS BlueCore Edition, and Yidong BlueCore Edition, among others. Advantages of the BlueCore Engine: The BlueCore engine's advantage lies in its high-pressure direct injection technology, which holds a leading position in the automotive industry. While conventional engines achieve complete fuel injection up to 2 times, the BlueCore engine in the CS75 can achieve up to 5 complete fuel injections, making it the highest among all currently produced vehicle models worldwide. Another strength of the BlueCore engine is its power. The BlueCore NE Power Platform is China's first modular engine R&D platform, known for its strong scalability and high commonality. Disadvantages of the BlueCore Engine: When operating at high speeds, the engine noise can be quite loud, affecting the driver's experience inside the vehicle. Additionally, the adoption rate is low, with few Changan models currently equipped with this engine. The fuel consumption is also relatively high; for example, the Changan BlueCore 1.4T engine consumes 10% to 20% more fuel compared to other brands' 1.4T engines. Moreover, the manufacturing process of the BlueCore engine is highly precise and complex, resulting in a high production cost. This complexity also poses certain challenges for maintenance and repairs.

15

0

Share

How many years should tires be used before replacement?

Under normal usage conditions, tires need to be replaced after 3-5 years of use, as tire wear and rubber aging can lead to decreased performance and potential safety hazards. For car owners with good driving habits, the typical tire replacement interval is 3-5 years or after driving 60,000-80,000 kilometers. If driving under more severe road conditions, such as frequent travel on gravel roads or situations involving constant traffic congestion, sudden braking, and sharp turns, the replacement period for tires will be shortened. The primary material of tires is rubber, which undergoes natural aging, mainly manifested as the tires hardening and the sidewalls developing small cracks. Generally, natural aging occurs over 4-5 years. Tires used for 5 years should be promptly replaced to prevent the risk of blowouts. To maintain optimal tire performance and extend their service life, regular maintenance is essential. First, it's important to regularly check tire pressure, as both overinflation and underinflation can cause abnormal tire wear, shorten the tire's lifespan, increase fuel consumption, and raise the risk of blowouts during high-speed driving. Additionally, pay attention to the wear of the tread pattern to ensure adequate tire grip. According to national standards, the wear limit for radial tires used in passenger cars is 1.6mm. Emphasizing four-wheel alignment, dynamic balancing, and tire rotation can effectively prolong the service life of tires.

18

0

Share

Will Sitting 4 People in the Back Seat Be Captured by Cameras?

Sitting 4 people in the back seat will not be captured by cameras. Hazards of Overloading: From the perspective of road cameras, having 4 people sitting in the back of the car will not be captured, but if traffic police notice, they will penalize for overloading. Common captured violations include running red lights, crossing lines, driving in the wrong direction, violating traffic bans, and not wearing seat belts. National road designs have certain load limits, and overloaded vehicles can damage the road surface, as the actual load far exceeds the upper limits for highways and bridges, leading to road damage, bridge fractures, and significantly shortening the lifespan of bridges. Driving an operational passenger vehicle with more than 20% over the approved passenger count results in a 12-point penalty; driving an operational passenger vehicle with over the approved passenger count but less than 20%, or driving another passenger vehicle with more than 20% over the approved passenger count, results in a 6-point penalty. Additional Information: Overloaded vehicles have greater mass and weight, increasing the vehicle's inertia, lengthening braking distance, and adding instability during driving, thereby increasing danger. Severe overloading can also damage car tires, causing excessive deformation, leading to blowouts or sudden swerving. Drivers under overload conditions tend to be more nervous, fearing detection, which can lead to operational errors, affecting driving safety and causing accidents.

6

4

Share

What are the new motorcycle inspection regulations for 2021?

New regulations for motorcycle annual inspections are as follows: Nationwide Inspection for Motorcycles: Motorcycles registered within the last 6 years are exempt from on-site inspection lines and can undergo inspections nationwide. Additionally, motorcycles exempt from inspection within 6 years are also exempt from environmental protection inspections. For applicants processing inspections in provinces (or autonomous regions/municipalities) other than where the motorcycle is registered, the requirement to issue an out-of-province inspection authorization letter has been abolished. For those who have already obtained such authorization letters but have not yet completed the inspection, the new regulations will apply, and no further review or retention of the authorization letter is required. Motorcycles exempt from inspection within 6 years can apply for inspection labels across different provinces (or autonomous regions/municipalities). Motorcycle Inspection Exemptions: Vehicles registered after June 1, 2017, are eligible for three exemptions from inspection; those registered between June 1, 2015, and May 31, 2017, having already undergone one inspection, qualify for two exemptions; those registered between June 1, 2014, and May 31, 2015, having undergone two inspections, qualify for one exemption; vehicles registered before May 31, 2014, must continue to follow the original regulations, requiring annual inspections at designated inspection centers.

18

5

Share

Where is the largest used car market in Chengdu located?

Can You Release the Clutch While Keeping the Brake Pressed During Start-Up?

Does a 3-point deduction on the driver's license affect the annual vehicle inspection?

Which Models Are Equipped with the BlueCore Engine?

How many years should tires be used before replacement?

Will Sitting 4 People in the Back Seat Be Captured by Cameras?

What are the new motorcycle inspection regulations for 2021?

How Many Kilometers Can a Full Tank of Gas Last?

How to Identify Good and Bad Gasoline?

What is Automotive Undercoating?

What are the new motorcycle annual inspection regulations for 2021?