Where is the keyhole on the Envision?

3 Answers
MarleyMarie
07/24/25 11:01am
The Buick Envision has a keyhole on the driver's side door, but it is located beneath a protective cover. To use the keyhole, you need to pry open the cover. There is no keyhole inside the vehicle, as the Envision is equipped with a push-button start system. Below is some relevant information about the Buick Envision: 1. The Buick Envision is a midsize SUV under the Buick brand. It is powered by two engine options: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. 2. The 1.5-liter turbocharged engine delivers 169 horsepower and 250 Nm of maximum torque. This engine reaches its peak power at 5,600 rpm and its maximum torque between 1,700 and 4,400 rpm. It features direct fuel injection and uses an aluminum cylinder head and block. This engine is paired with a 7-speed dual-clutch transmission. 3. The 2.0-liter turbocharged engine produces 260 horsepower and 400 Nm of maximum torque. Its peak power is achieved at 5,500 rpm, while maximum torque is available between 3,000 and 4,000 rpm. This engine also employs direct fuel injection and an aluminum cylinder head and block. It is mated to a 9-speed automatic transmission.
Was this review help?
11
1
Share
LaErin
08/11/25 2:36am
As an owner of an Envision, I remember the key slot is located right in front of the driver's seat, on the steering column below the right side of the steering wheel. Once seated in the driver's seat, you can easily spot a small hole by looking down—it's ergonomically designed for convenient right-hand key insertion to start the car. Some newer Envision models now feature a push-button start system, but the key slot position usually remains unchanged, serving as a backup for emergencies or battery replacement. If you can't find it, don't panic—check the user manual in the glove compartment or look for hints near the light switch. A safety reminder: always confirm the gear is in Park and press the brake pedal before starting to prevent rolling. Making it a habit to glance at the key slot before driving helps avoid accidents.
Was this review help?
5
0
Share
Expand All
Leroy
09/25/25 4:09am
When I first drove the Enclave, I was a bit confused looking for the key slot, only to find it conveniently located right below the steering wheel on the right side. Sitting in the driver's seat, just glance down at the steering column area—there's a round hole that serves as the direct entry point. If you can't locate it, don't hesitate to ask an experienced friend nearby. In keyless start models, the key slot might be concealed for emergency use. Looking back, car designs are quite thoughtful, placing essential components within easy reach. Paying attention to these small details makes driving operations much smoother.
Was this review help?
16
4
Share
Expand All
More Forum Discussions

Where is the engine number located on a Nanjing Iveco?

Nanjing Iveco's engine number is located above the diesel pump on the left side of the engine, near the driver's side. It typically consists of a 7 to 8-digit combination of numbers and letters. In addition to the above method, the engine number can also be viewed through the following 4 ways: The vehicle's driving license prints the engine number, usually located on the second last line; The motor vehicle registration certificate will state the engine number; The car purchase invoice will state the engine number; The vehicle purchase tax payment certificate will state the engine number. It should be noted that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer, and engine models can be the same. The engine number refers to the production number of the engine, where each engine can only use one engine number and each engine's number is unique.
7
4
Share

What kind of engine oil is recommended for BYD F3?

BYD F3 is recommended to use the original 10W30SG type engine oil. Any engine oil that meets this specification can be used. You can also refer to the vehicle's user manual, which contains the accurate engine oil model. 10W30 is the viscosity grade of the engine oil, where W stands for winter. The smaller the number before the W, the better the low-temperature fluidity of the oil, the lower the ambient temperature it can be used in, and the better the protection for the engine during cold starts. Taking the 2020 BYD F3 manual classic model as an example: it is a compact car launched by BYD, with a length, width, and height of 4533mm, 1705mm, and 1490mm respectively, and a wheelbase of 2600mm. It is equipped with a 1.5L naturally aspirated engine, with a maximum power of 80kw, matched with a 5-speed manual transmission.
10
3
Share

Is it a problem if the car chassis is rusty?

If the chassis is severely rusted overall, it can only be scrapped. If it's only partially rusted, it can be welded and repaired. It is recommended to go to a professional auto beauty shop for rust-proof treatment. During the treatment, rust-proof materials should be evenly applied to the coating. After completion, simply wait for it to air dry naturally. Additional content is as follows: Car Chassis: Composed of four parts: the transmission system, the running gear, the steering system, and the braking system. The chassis supports and installs the car engine and its various components and assemblies, forming the overall shape of the car. It also receives the engine's power to make the car move and ensures normal driving. Common Damages to Car Chassis: (1) Bottoming out or impact by foreign objects: Bottoming out is unpredictable and can easily damage parts located on the chassis, such as cracking the catalytic converter shell, engine oil pan, or transmission housing, or deforming the suspension system. (2) Corrosion: Since the chassis often comes into contact with sewage, grease, and other substances, the chemical components in these materials can slowly corrode the chassis and its parts. Therefore, extra attention should be paid to rust-proofing the chassis.
12
0
Share

What is the tire model of the Audi A4L?

Audi A4L tire model is 225/55R16. The first number 225 represents the tire width of 225MM, 55 indicates the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, the letter R stands for radial tire, and 16 represents the rim diameter of 16 inches. The Audi A4L has a top speed of 218km/h, accelerates from 0-100km/h in 3.1 seconds, and has a fuel consumption of 3.6L per 100km. In addition to the model, the tire also displays the following common data: Tire cord material: Represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed ratings of the tire from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim specification compatible with the tire for practical use, such as "Standard rim 5.00F".
1
1
Share

What to Do When the Manual Transmission Key Won't Come Out?

If the manual transmission key won't come out, try turning the steering wheel slightly left or right to remove it. Below is relevant information about why a manual transmission key may get stuck: Reasons: The key may not come out due to a faulty ignition switch or because the steering wheel has locked the ignition switch's locking mechanism to either side. Solutions: If the steering wheel is blocking the ignition switch, gently turning it left or right should release the key. Precautions: (1) When starting a manual transmission vehicle's engine, ensure the gear is in neutral and the clutch pedal is fully depressed before ignition. (2) Always depress the clutch pedal completely before starting the engine in a manual transmission car. (3) When moving off in a manual vehicle, use the clutch semi-engagement technique. Be careful to control the duration of semi-engagement to avoid burning the clutch disc.
14
5
Share

What are the general car detailing service items?

General car detailing services include car washing and waxing. Below is relevant information about general car detailing: Disadvantages: Incomplete cleaning may cause paint film scratches and produce fine marks. If not wiped thoroughly afterward, water stains may remain in certain areas, and after water sealing evaporates, it can form water marks that affect the surface gloss. Principles: The principle of combining prevention with treatment. Car detailing should focus on prevention, meaning necessary maintenance should be performed before damage occurs to the car's paint film and other surfaces. If the purpose of detailing is for other reasons, it is not permitted.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.