Where is the keyhole of the Volkswagen Bora?

Can You Make a U-Turn in a Left-Turn Lane When the Light is Green?

You cannot make a U-turn in a left-turn lane when the light is green. Here are the specific rules regarding U-turns for vehicles: 1. Situations where U-turns are not allowed: Vehicles are prohibited from making U-turns at locations with no U-turn signs or no left-turn signs, markings, as well as at railway crossings, crosswalks, bridges, sharp curves, steep slopes, tunnels, or other hazardous sections of the road. 2. Situations where U-turns are allowed: Vehicles can make U-turns at locations without no U-turn signs or no left-turn signs and markings, provided they do not obstruct the normal passage of other vehicles and pedestrians.

8

4

Share

What are the differences between B-segment and C-segment cars?

Here are the specific differences between B-segment and C-segment cars: 1. Engine displacement: B-segment cars have a displacement ranging from 1.5L to 2.5L. C-segment cars have a displacement ranging from 2.4L to 3.2L. 2. Wheelbase: B-segment cars have a wheelbase between 2.7 meters and 3.0 meters. C-segment cars have a wheelbase around 3.0 meters to 3.1 meters. 3. Body length: B-segment cars have a body length between 4.5 meters and 4.9 meters, belonging to the mid-size category, such as Accord and Camry. C-segment cars have a body length between 4.8 meters and 5.0 meters, such as BMW 5 Series and Audi A6.

13

5

Share

Are Cars in Taiwan Left-Hand Drive or Right-Hand Drive?

Cars in Taiwan are left-hand drive, and vehicles drive on the right side of the road. Taiwan license plates consist of two English letters followed by four numbers, such as AD-1234. The following are precautions for driving on highways: 1. Safety Check: Before getting in the car, check for potential safety hazards. Before driving on the highway, inspect your vehicle for any safety issues. 2. Wear Seat Belts: Always wear seat belts on the highway, including the driver, front passenger, and rear seats. Avoid placing unsecured items in the car. 3. Stay in One Lane: Avoid frequent lane changes on the highway—do not switch between the passing lane and the driving lane abruptly. Never make sudden, unannounced decelerations or stops in the driving lane. While driving, avoid traveling side by side with other vehicles, staying in the passing lane for extended periods, or attempting to overtake from the emergency lane. Additionally, prepare for lane changes in advance when exiting the highway to avoid missing your exit.

1

5

Share

What Causes Loss of Communication with the Transmission Control Module?

This is caused by a break in the CAN bus communication line. Here are the relevant details: 1. Line break: This refers to a break in the communication line between the engine control unit and the automatic transmission control unit. It is necessary to check whether the wiring at the connectors of these two control units is secure, and whether there is any short circuit or poor contact. A multimeter should be used for inspection. Repairing the wiring will resolve the issue. Timely maintenance and repair are essential to ensure stable, comfortable, and safe driving. 2. Instability: If the communication between the engine control module and the automatic transmission is interrupted or unstable, occurring intermittently, the two will not be able to coordinate properly. The transmission will then enter a fault mode and remain in neutral, causing the vehicle to be unable to continue driving.

12

2

Share

What to Do If Your Car is Flooded?

Here are the on-site handling procedures when your car is flooded: 1. If the vehicle is waterlogged, immediately notify your insurance company: Request the insurer's staff or an authorized third-party appraiser to conduct an on-site inspection. However, given the high volume of flood-damaged vehicle cases, insurers often cannot arrive promptly. In such cases, you may ask the insurance company to allow the owner or policyholder to take photos of the waterlogged scene with a camera or phone as claim evidence. 2. Before the rescue tow truck arrives, it's best to disconnect the vehicle's battery power immediately: Typically, remove the negative terminal of the battery and shift the transmission to neutral. This prevents accidental startup during towing, which could exacerbate vehicle damage. This step is crucial because tow trucks often require unlocking the steering wheel's mechanical lock with the key, which simultaneously activates the electrical power switch, energizing the vehicle's electronics.

10

2

Share

How to Solve the Problem of Abnormal Noise When Opening and Closing Car Doors?

Solutions for abnormal noise when opening and closing car doors: 1. Check if the door seal is aging and replace it if necessary; 2. Check for any foreign objects in the door gaps and clean them; 3. If the noise is caused by loose parts between door components, tightening the screws can solve the problem; 4. If the noise is due to insufficient body stiffness or welding detachment causing friction between steel plates, it is recommended to seek professional repair at a maintenance shop. The design requirements for car doors are: 1. Ensure ease of passenger entry and exit, with the opening angle controlled between 65 to 70 degrees; 2. Avoid positional interference with other parts during the opening process; 3. Ensure reliable locking when the door is closed to prevent it from opening while driving; 4. Provide good sealing performance; 5. Have a large transparent area to meet lateral visibility requirements; 6. Possess sufficient strength and stiffness to ensure reliable door operation, reduce door vibrations, improve vehicle side collision safety, and prevent door sinking.

17

2

Share

Where is the keyhole of the Volkswagen Bora?

Can You Make a U-Turn in a Left-Turn Lane When the Light is Green?

What are the differences between B-segment and C-segment cars?

Are Cars in Taiwan Left-Hand Drive or Right-Hand Drive?

What Causes Loss of Communication with the Transmission Control Module?

What to Do If Your Car is Flooded?

How to Solve the Problem of Abnormal Noise When Opening and Closing Car Doors?

How to set the seat memory on the Lynk & Co 01?

How to Schedule a Car Maintenance Appointment?

What Are the Reasons for the Right Wheel Crossing the Line During Reverse Parking?

Is Self-Check Necessary for One-Button Start?