Where is the keyhole of the Envision?

What transmission does the Peugeot 408 use?

The Peugeot 408 is equipped with three types of transmissions: a 5-speed manual transmission, a 6-speed automatic transmission (6AT), and a 6-speed dual-clutch transmission. The dual-clutch transmission is currently a popular choice, developed based on the manual transmission. Its structure is similar to that of a manual transmission, with the addition of an extra clutch and a shift control mechanism. The Peugeot 408 also features three engine options: a 1.2-liter turbocharged engine, a low-power version of the 1.6-liter turbocharged engine, and a high-power version of the 1.6-liter turbocharged engine.

4

0

Share

Is the Peugeot 408 a Three-Cylinder Engine?

Peugeot 408's 1.2T engine is a three-cylinder, but not all models of the Peugeot 408 are equipped with three-cylinder engines. The Peugeot 408 uses two types of engines in total: one is a 1.2-liter turbocharged engine, and the other is a 1.6-liter turbocharged engine. The Peugeot 408 is a compact car under the Peugeot brand, with a wheelbase of 2730 mm, and dimensions of 4750 mm in length, 1820 mm in width, and 1488 mm in height. The front suspension of the Peugeot 408 uses a MacPherson independent suspension, while the rear suspension employs a torsion beam non-independent suspension. French cars tend to favor torsion beam suspensions due to their compact size and minimal space occupation. Using a torsion beam suspension for the rear can expand the rear seating space and trunk space.

13

0

Share

What are the causes of rear oxygen sensor problems?

Rear oxygen sensor failures can occur due to the following reasons: 1. System malfunctions when the sensor is infected by a virus; 2. Failure of the catalytic converter; 3. Poor sensor quality, where a surface coating slows down or disables the sensor's response; 4. External carbon buildup or oil contamination, or internal ingress of oil and dust. The rear oxygen sensor is a standard component in vehicles, typically paired with a front oxygen sensor. The front sensor is installed on the exhaust manifold, while the rear sensor is located behind the three-way catalytic converter. The primary function of the oxygen sensor is to monitor the purification efficiency of the three-way catalytic converter by measuring the oxygen content in the post-purification exhaust gases. Effects of a faulty rear oxygen sensor include: 1. Unstable idling; 2. Reduced engine power and sluggish acceleration; 3. Black smoke emission from the exhaust pipe.

4

Share

When did Suzhou start implementing China 6 emission standards?

Implementation time of China 6 standards in Jiangsu: July 1, 2019. Specific details are as follows: 1. Starting from July 1, 2019, all newly produced light-duty vehicles sold and registered in Jiangsu Province must meet or exceed the China 6a phase requirements of motor vehicle emission standards. 2. From July 1, 2019, all heavy-duty gas vehicles produced, imported, sold, and registered in Jiangsu Province must comply with the China 6a phase requirements of motor vehicle emission standards. 3. For vehicles purchased before the implementation date specified in this notice (based on the date of purchase invoice) or transferred from other provinces to Jiangsu (based on the transfer registration date on the motor vehicle registration certificate) that meet China 5 emission standards, the traffic management department of the public security organ may process vehicle registration procedures within one month after the implementation date specified in this notice. Late applications will not be accepted.

4

0

Share

What causes shaking when braking at 60-80 km/h?

The following are the specific reasons for steering wheel vibration when braking at 60-80 km/h: 1. Wheel balance issue. A car wheel consists of a tire and a rim. When there is a problem with the wheel balance, it means the wheel is not in a balanced state during high-speed driving. If the balance data is incorrect, the wheel's rotation center will shift, causing the wheel to shake, which in turn affects the steering wheel. 2. Rim problem. If the car's rim has been impacted during previous driving, causing deformation. The deformation of the rim can also lead to wheel shaking during driving, resulting in steering wheel vibration. 3. Chassis component issue. This usually occurs in cars with poor post-accident repairs. Due to the impact during the accident affecting the chassis components, steering wheel vibration can also occur.

17

0

Share

What does car charger mean?

Car charger refers to an in-vehicle charger. Relevant introductions are as follows: 1. A car charger is a conventional in-vehicle charger powered by the car battery, widely used in the field of lithium battery charging for various portable and handheld devices. It is an accessory designed to allow car owners to conveniently charge their digital products anytime, anywhere using the car's power supply. Some high-end car chargers typically include 2 USB ports, enabling simultaneous charging for two digital devices. 2. A qualified charger must meet many requirements, the most important of which is having circuit overload protection. In the event of a short circuit, it can immediately cut off the power to prevent damage to the charging device and power source. To save costs, some small manufacturers may omit the "fuse" when producing car chargers. Additionally, some substandard car chargers fail to provide stable voltage and current, leading to fluctuations that can cause severe overheating of the charging device and charger, posing certain risks to both the phone and safety.

5

3

Share

Where is the keyhole of the Envision?

What transmission does the Peugeot 408 use?

Is the Peugeot 408 a Three-Cylinder Engine?

What are the causes of rear oxygen sensor problems?

When did Suzhou start implementing China 6 emission standards?

What causes shaking when braking at 60-80 km/h?

What does car charger mean?

What transmission does the Dongfeng Peugeot 308 use?

What causes the Peugeot 408 to display an engine fault?

Where is the cabin air filter located in the 408?

Is the Peugeot 408 equipped with independent suspension?