Where is the keyhole located on a Volkswagen Golf?

How to Check if a Car Meets China 5 Emission Standards?

Methods to check if a vehicle meets China 5 emission standards: 1. Look at the "Vehicle Fuel Consumption Label" on the new car to determine whether it is a China 4 or China 5 vehicle. The Vehicle Fuel Consumption Label is usually posted on the side window of the new car, indicating the fuel consumption under urban, suburban, and combined driving conditions for light-duty vehicles. 2. Check the new car's nameplate to find the vehicle model number, which is a combination of numbers and letters. 3. Inspect the engine model of the new car. 4. Visit the official website of the Motor Vehicle Environmental Protection, enter the vehicle model and engine model, and perform a query to confirm whether it is a China 5 or China 4 vehicle.

14

0

Share

Why Does Tire Pressure Increase While Driving?

Tire pressure increases while driving primarily due to the expansion of gas inside the tires during operation. Below is an expanded explanation of tire pressure: 1. Generally, the normal tire pressure should be based on the manufacturer's recommended value. 2. The standard tire pressure depends on the type of tire and the vehicle model. Different models have varying weights, heights, and tire sizes, each requiring different tire pressures. Standard tires typically have a pressure of 240kpa-250kpa, while reinforced tires have a pressure of 280kpa-290kpa. 3. Additionally, tire pressure differs between cold and hot tires, with hot tires having about 20kpa higher pressure than cold ones. The manufacturer's recommended value refers to the cold tire pressure, which is usually around 230kpa-250kpa when the vehicle is cold. However, the specific tire pressure should always be based on the value indicated for each individual vehicle.

4

2

Share

What is the P gear?

P gear stands for Parking gear. Below is a detailed introduction to car gears: 1. R gear is the Reverse gear. When engaged, it connects the hydraulic system's reverse oil circuit, causing the drive wheels to rotate in reverse for backward movement. Never force the gearshift into "R" when the vehicle is not completely stopped, as this may damage the transmission. 2. N gear is Neutral. In this position, the planetary gear system idles without power output. 3. D gear is Drive gear. When the gearshift lever is in this position, the hydraulic control system automatically engages the corresponding forward gear oil circuit based on throttle opening and vehicle speed signals. It automatically shifts up or down according to driving speed, achieving automatic transmission functionality.

8

2

Share

What Causes a Manual Transmission Clutch Pedal to Become Heavier When Depressed?

The reasons for a manual transmission clutch pedal becoming heavier when depressed are as follows: 1. Strong return spring tension: To ensure the clutch pedal returns quickly and accurately to its standby position when released, a return spring is designed at the pedal. If the heavy pedal phenomenon occurs after replacing the spring, it is likely due to excessive tension in the clutch pedal return spring. 2. Damaged clutch slave cylinder: Many car clutches use an assist system, which normally makes operation easier. However, if the clutch slave cylinder malfunctions, it may result in insufficient assistance, ultimately causing the clutch pedal to feel very heavy when depressed. 3. Low compressed air pressure: Most of the power driving the clutch booster comes from the compressed air in the air reservoir. If the compressed air pressure leading to the booster is too low, it will result in insufficient assistance. Therefore, when such a fault occurs, the compressed air pressure to the clutch booster should be checked first. 4. Insufficient lubrication: The clutch slave cylinder (commonly known as the release cylinder) drives the pressure plate to complete separation through a series of mechanical structures. There are several points within this structure that require lubrication. If lubrication is insufficient, excessive friction can cause the clutch pedal to become heavy. 5. Overly tight release bearing: If the clearance between the release bearing and the guide sleeve is too small, it will cause excessive friction, wasting driving force on the friction between the release bearing and the guide sleeve, inevitably resulting in a heavy pedal.

17

4

Share

What Does the Exclamation Mark Light Bulb on the Car Dashboard Mean?

Yellow light bulb with an exclamation mark: This is the lighting fault indicator, indicating that there is a malfunction with one of the car's lights. Solution: Visit a 4S shop for inspection and repair as soon as possible. You can also perform a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting, to identify the issue. The exclamation mark is a common fault indicator in cars. Besides the yellow light bulb with an exclamation mark, there are four other forms of exclamation mark indicators: an exclamation mark inside a triangle, an exclamation mark inside a yellow gear, an exclamation mark inside a circled parenthesis, and an exclamation mark inside a parenthesis with a horizontal line below. Below is a detailed analysis: General Fault: An exclamation mark inside a triangle. If this symbol lights up, it indicates a malfunction in the car's general performance, components, or functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: An exclamation mark inside a yellow gear. This is the automatic transmission fault warning light, indicating a problem with the transmission or that the transmission fluid is below the normal range. Replace the transmission fluid promptly. Brake System Fault: An exclamation mark inside a circled parenthesis. This represents a brake system warning, typically indicating a brake system malfunction or low brake fluid level. Inspect and repair the brake system immediately to avoid accidents. Tire Pressure Anomaly: An exclamation mark inside a parenthesis with a horizontal line below. This represents the tire pressure monitoring warning light, which illuminates when the car's tire pressure is too low. Check the tire pressure and restore it to the normal range.

10

0

Share

How to Use the Two Chances for Subject One?

The "Regulations on the Application and Use of Motor Vehicle Driving Licenses" clearly stipulate that on the day of the Subject One retake exam, candidates can take the test twice. If they fail the first attempt, they can take a second retest for free. If they still fail the second attempt, the Subject One exam is terminated, and they can only reschedule the exam after ten days. Subject One, also known as the theoretical driving test or driver's theory exam, is part of the motor vehicle driving license assessment. The exam content includes driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The exam is conducted on a computer with a time limit of 45 minutes. A passing score for Subject One is 90 points, with 100 questions in total, divided into single-choice and true/false questions, each worth 1 point, totaling 100 points. If 11 questions are answered incorrectly during the exam, the system will automatically submit the test and end the exam. Subject One Exam Content: Driving license and motor vehicle management regulations; road traffic conditions and regulations; road traffic safety violations and penalties; road traffic accident handling regulations; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject One Exam Notes: During the Subject One exam, candidates should pay attention to their attire—no slippers are allowed, and electronic devices and bags are prohibited in the exam hall. Bring your ID card and queue to enter the waiting hall. Observe the instructions and procedures on the large screen, and store personal belongings in lockers before entering the exam hall. Upon entering the exam hall, the identity verification desk will assign a seat. After finding your seat, begin the exam. Ensure the camera is aligned with you and follow exam discipline. If you fail the first attempt, there is a retake on the same day. If you fail again, you must pay to reschedule. After the exam, queue to collect your score report and sign it. Failure to sign will render the result invalid. There is no limit to the number of times you can reschedule the Subject One exam. Each subject allows one exam attempt, with one retake if you fail. If you do not take the retake or fail the retake, the exam is terminated, and the applicant must reschedule. For Subject Two and Subject Three, there are only five exam attempts. Subject Two and Subject Three exams can be rescheduled after ten days. If you fail the Subject Three safe and civilized driving knowledge test, the passed road driving skills test results remain valid. The driving test consists of three subjects: Subject One, Subject Two, and Subject Three. Subject One refers to the road traffic safety laws, regulations, and related knowledge exam; Subject Two refers to the field driving skills exam; Subject Three is divided into two parts: road driving skills and safe and civilized driving knowledge. The safe and civilized driving knowledge test is conducted after Subject Three, so it is commonly referred to as Subject Four. However, in official terms (i.e., the Ministry of Public Security Order No. 123), there is no mention of Subject Four.

10

4

Share

Where is the keyhole located on a Volkswagen Golf?

How to Check if a Car Meets China 5 Emission Standards?

Why Does Tire Pressure Increase While Driving?

What is the P gear?

What Causes a Manual Transmission Clutch Pedal to Become Heavier When Depressed?

What Does the Exclamation Mark Light Bulb on the Car Dashboard Mean?

How to Use the Two Chances for Subject One?

What kind of engine oil should be used for Golf 1.4T?

What Are the Symptoms of Cold Engine Shaking?

Does Engine Valve Noise Need Repair?

How to Test if an ABS Sensor is Good or Bad?