Where is the keyhole inside the Baojun 510?

1 Answers
VanArabella
07/30/25 12:58am
The keyhole inside the Baojun 510 is located on the right side of the steering wheel, which is a common position. It's important to note that some models feature a push-button start system, and these models do not have a keyhole. For push-button start models, you don't need to insert the key into a keyhole to start the car; simply press the brake pedal and click the push-button start to ignite the engine. The Baojun 510 is a compact SUV under SAIC-GM-Wuling, with dimensions of 4220mm in length, 1740mm in width, and 1615mm in height, and a wheelbase of 2550mm. It features front-wheel drive. In terms of design, the Baojun 510 adopts a distinctive split headlight design, with LED daytime running lights connected to the large front grille. The main headlights are positioned on either side of the grille, while the rear features conventional halogen tail lights.
Was this review help?
12
5
Share
More Forum Discussions

Is There a Relationship Between Vehicle Violations and My Driver's License?

Traffic violations on a motor vehicle are not directly related to the driver's license. Violations on the driver's license are recorded on the license itself and are associated with the person, while vehicle violations are recorded on the vehicle registration certificate and are primarily associated with the vehicle. During the annual inspection of the driver's license, all violations on the license must be resolved, but violations under one's name related to the vehicle can be ignored. For the vehicle's annual inspection, it is only necessary to resolve all vehicle violations, regardless of whether there are any violations on the individual's driver's license. Distinguishing between driver's license and vehicle violations: Violations queried using the driver's license are driver's license violations, while those queried using the vehicle registration certificate are vehicle violations. There is no necessary connection between the two types of violations. Driver's license violations: These are violations by the driver. The driver must be present when the traffic police issue the penalty upon obtaining the driver's license, and the driver is always aware of these violations. Vehicle violations: These are various violations during the operation of the vehicle, mainly captured through surveillance or issued by police on the spot. The driver may not necessarily be aware of vehicle violations and needs to check to understand the details, time, and location of the violations. Points deducted for vehicle violations must be assigned to a driver. Therefore, points from vehicle violations must be cleared using a driver's license.
14
1
Share

What is the tire model of the Bentley Bentayga?

There are two types of tire sizes for the Bentley Bentayga, which are 285/45R21 and 285/40R22. The first number 285 indicates that the tire width is 285MM, 45 represents that the aspect ratio of the tire section is 45%, meaning the section height is 45% of the width. The letter R stands for radial tire, and 21 indicates that the rim diameter is 21 inches. The Bentley Bentayga has a top speed of 290km/h, accelerates from 0 to 100km/h in 4.5 seconds, and has a fuel consumption of 12L per 100km. In addition to the model, the following common data is also marked on the tire: Tire cord material: represented by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord tire. Speed rating: indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed ratings of the tire from 4.8km/h to 300km/h. Commonly used speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: indicates the rim specification compatible with the tire. It is convenient for practical use, such as 'Standard Rim 5.00F'.
18
0
Share

How Often Should Car Freon Be Recharged?

It depends on usage. You can recharge the Freon when it is insufficient or the cooling effect is poor. Below are the signs of insufficient Freon in the air conditioning system: 1. The low-pressure pipe feels dry to the touch and lacks a cold sensation: This occurs because the lack of Freon lowers the boiling point of the refrigerant in the evaporator, raising the temperature of the refrigerant in the low-pressure pipe valve. 2. Frost forms on the high-pressure pipe: This happens due to a drop in pressure inside the liquid pipe, lowering the boiling point and causing the high-pressure pipe temperature to fall below freezing, leading to frost formation from moisture in the air. 3. Minimal or small frost coverage on the evaporator: Open the indoor unit panel and remove the filter to observe the frost on the evaporator. If the frost is minimal or covers a small area, it indicates insufficient refrigerant, reducing cooling capacity. 4. No warm air from the outdoor unit exhaust: This is caused by insufficient refrigerant, lowering the condensation pressure and temperature. 5. Reduced or no water discharge from the indoor unit drain pipe: Insufficient Freon decreases cooling capacity, preventing the condenser from condensing water. 6. Pressure measured at the outdoor unit Freon port is below 0.45MPa: This is due to insufficient refrigerant, causing a drop in evaporation pressure. If none of these symptoms are present, there is no need to recharge Freon. There is no fixed interval for recharging the air conditioning refrigerant; some systems may only require a recharge every 5-6 years, depending on Freon leakage.
12
2
Share

What is the best method for car tire repair?

One of the better methods for car tire repair is the internal patch method: Remove the flat tire, use a specialized machine to separate the tire from the rim, then grind the damaged area on the inner side of the tire, apply a special adhesive, attach the tire patch, and finally use tools to press it until fully bonded. The advantage of the internal patch method is reliable repair without damaging the tire tread. However, since the patch is applied from inside the tire, the hole in the tire still exists, so water may seep in and damage the steel wires and fabric layers. If the damage is relatively large, sharp objects like gravel may puncture the patch from the hole, making this method suitable only for smaller tire damages.
8
5
Share

What Causes Insufficient Turbo Pressure in the Audi S6?

Audi S6 insufficient turbo pressure may be caused by carbon buildup in the engine. Main function of the turbo: It increases the engine's air intake, thereby enhancing the engine's power and torque, making the car more powerful. When a turbocharger is installed on an engine, its maximum power can increase by 40% or more compared to when no turbocharger is installed. Introduction to turbocharging: TURBO is divided into four types: mechanical supercharging, pressure wave supercharging, exhaust gas supercharging, and compound supercharging. Turbocharging is essentially an air compressor that increases the engine's air intake by compressing air, thereby boosting the engine's power and torque, making the car more powerful.
17
3
Share

How to Deal with Vehicle Paint Scratches?

Vehicle paint scratches can be treated as follows: For minor scratches that only affect the surface layer of the topcoat, they can be completely repaired by waxing. Use a compound to treat the area, wiping in straight lines, and then apply wax. Start with coarse wax followed by fine wax, moving in the same direction from the inside out. This method will remove almost all fine scratches. Waxing, glaze sealing, and crystal coating are common ways to protect the car paint, but they require irregular maintenance every 3 to 6 months. If conditions permit, it is recommended to use a paint protection film (PPF), which can effectively protect the car's paint surface from discoloration, scratches, and even deformation.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.