Where is the keyhole for the Nissan Tiida?

1 Answers
LucasAnn
07/30/25 4:33am
There is a slot the size of a smart key below the start button; insert the entire smart key into it. In case the smart key runs out of battery, first use the mechanical key to open the door. After opening the door, reinsert the mechanical key, then insert the entire smart key into the slot located below the start button. Depress the brake pedal and press the start button to ignite the engine. Below is more information about the Nissan Tiida: 1. In terms of appearance and interior, the new model remains largely consistent with the previous version, with the main improvements being in the technological features. The previous Tiida was already equipped with the advanced i-CONNECT smart entertainment system, and the new Tiida adds the Dongfeng Nissan "Intelligent Mobility+" connected car system on top of that. This system incorporates iFLYTEK voice recognition technology and, through collaboration with AutoNavi, provides real-time updates for online maps. It enables intelligent congestion avoidance, inertial navigation, and remote real-time monitoring. Users can remotely monitor the vehicle's status and locate the vehicle in real-time via a mobile app. 2. In terms of safety features, the new model is equipped with the NISSAN-i-SAFETY intelligent active safety system, which includes the FEB intelligent forward emergency braking system. When the vehicle is traveling between 10km/h and 80km/h, the FEB system continuously monitors pedestrians or vehicles directly ahead. If the system detects a potential collision risk, it provides early warnings through audible alerts and the TFT display on the instrument panel, and actively applies emergency braking to prevent collision hazards.
Was this review help?
3
2
Share
More Forum Discussions

What are the starting procedures for the Volkswagen Tiguan?

The starting procedures for the Volkswagen Tiguan are: 1. Without pressing the foot brake, press the start button twice to initiate the vehicle's computer system self-check, which should last at least six seconds; 2. Press the foot brake and press the start/stop button to ignite; 3. Release the foot brake and allow the vehicle to warm up while stationary; 4. Press the foot brake, release the handbrake, and shift the gear from P to D; 5. Gradually release the foot brake to start moving; 6. Depending on road conditions, smoothly press the accelerator to increase speed. Taking the 2017 Volkswagen Tiguan as an example, it is a compact SUV with body dimensions of: length 4506mm, width 1809mm, height 1685mm, a wheelbase of 2684mm, and a body weight of 1600kg.
5
4
Share

Is it normal for the BMW 7 Series engine to shake a few times when starting?

It is normal for the BMW 7 Series engine to shake a few times when starting, but if the shaking persists, it is abnormal and the cause should be identified and resolved in a timely manner. Taking the 2017 BMW 7 Series as an example, it belongs to the large car category with the following dimensions: length 5250mm, width 1902mm, height 1498mm, wheelbase 3210mm, fuel tank capacity 46l, trunk capacity 420l, and curb weight 2190kg. The 2017 BMW 7 Series is equipped with a 2.0t turbocharged engine, delivering a maximum horsepower of 258ps, maximum power of 190kw, maximum torque of 400nm, paired with an 8-speed automatic transmission.
17
4
Share

Does Lamborghini Have Automatic Transmission?

Lamborghini offers both manual and automatic transmissions. The newer models come with automatic transmissions, while the older ones have manual transmissions. Lamborghini uses paddle shifters instead of a gear lever for shifting. To shift gears, there are plus and minus paddles on either side of the steering wheel. Press the brake, use the paddle shifter to upshift, and release the brake to start. For reverse, simply press the R button on the left side of the steering wheel or on the center console. To park, pull both paddle shifters simultaneously to shift into neutral (N). Differences between Lamborghini's manual and automatic transmissions: Operational Difficulty: Automatic transmissions do not require the driver to press the clutch or shift gears frequently, making them easier to operate. Manual transmissions require the driver to press the clutch to change gears, demanding higher driving skills. Principle: Automatic transmissions use a computer to control hydraulic oil, which pushes pistons to shift gears based on throttle position, speed, and throttle opening. Manual transmissions add a manually adjustable shifting mechanism to the original 100 automatic transmission, allowing the driver to use this mechanism for gear changes. Operation: Automatic transmissions do not require manual gear changes; the vehicle automatically selects the appropriate gear based on speed and road conditions. Manual transmissions rely entirely on the driver to manually shift gears.
3
1
Share

What are the differences between Baojun 510 and 530?

The differences between Baojun 510 and 530 are: 1. Different fuel tank capacities: Baojun 510 has a fuel tank capacity of 45 liters; Baojun 530 has a fuel tank capacity of 52 liters. 2. Different body dimensions: Baojun 510 measures 4220mm in length, 1740mm in width, and 1615mm in height, with a wheelbase of 2550mm; Baojun 530 measures 4690mm in length, 1835mm in width, and 1750mm in height, with a wheelbase of 2750mm. Both Baojun 510 and Baojun 530 feature front-wheel drive, with MacPherson strut front suspension and torsion beam rear suspension.
18
3
Share

What is the body weight of the Lavida?

The body weight of the Lavida is 1210kg, which is a compact car produced by Shanghai Volkswagen. Taking the 2019 Lavida as an example, its body dimensions are: length 4613mm, width 1765mm, height 1460mm, with a wheelbase of 2610mm and a fuel tank capacity of 52.8 liters. The 2019 Lavida features a front MacPherson independent suspension and a rear torsion beam non-independent suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 112PS, a maximum power of 82kW, and a maximum torque of 145Nm, paired with a 5-speed manual transmission.
14
4
Share

Do I Need to Replace All Four Tires?

Tires do not necessarily need to be replaced all four at once, but if conditions permit, replacing all four together can help maintain the original handling balance. Tires should be rotated every 5,000 to 8,000 kilometers. The functions of tires are: 1. Transmit driving force, braking force, and steering force to achieve vehicle operation; 2. Support vehicle load; 3. Reduce and absorb vibrations and impact forces during driving, preventing severe vibrations from damaging vehicle components. Tire maintenance methods include: 1. Regularly clean stones stuck in tire treads; 2. Minimize exposure to direct sunlight; 3. Promptly check tire pressure; 4. Pay attention to suspension maintenance; 5. Regularly inspect front wheel alignment; 6. Adopt careful driving habits—choose smooth road surfaces and avoid objects that may puncture or scratch tires, as well as chemical spills that could corrode tires.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.