···
Log in / Register

Where is the keyhole for the Hyundai Elantra's one-button start?

4 Answers
StAddyson
07/29/25 7:09pm

Hyundai Elantra does not have a keyhole. The white button located below the right side of the steering wheel is the one-button start button. Vehicles equipped with one-button start usually also feature keyless entry. Below is more information about the one-button start system: 1. Overview: The one-button start system is part of smart car technology, a button device designed to simplify the starting process, which can also be used to turn off the engine. It is typically located where the traditional key ignition would be. 2. Functions: In case of an emergency stop, pressing the start button more than three times consecutively will shut down the engine to complete braking. Alternatively, if the vehicle stalls suddenly while driving, the one-button start can still be used. Simply shift the gear to N (neutral) and press the one-button start to restart the engine. Note that the brake pedal should not be pressed during this process.

Was this review help?
17
3
Share
DiStephen
08/14/25 1:24pm

I see this is quite a common question regarding the keyhole position for the Hyundai Elantra's push-button start. Having driven this model for years, I find its design very practical. The keyhole is usually located on the lower left side of the steering column, concealed under a small plastic cover that can be flipped open by hand. If you're in a hurry and your key fob battery dies, you can insert the physical key for emergency starting. I remember dealerships specifically demonstrate this feature during new car deliveries to prevent panic in emergencies. I recommend all owners take time to familiarize themselves with its location – perhaps by crouching down to inspect it after parking, or checking the illustrated manual. Though the push-button is convenient for daily use, this keyhole serves as a safety net. Developing the habit of checking it can prevent many troubles. In short, knowing its location well eliminates worries about unexpected situations.

Was this review help?
17
2
Share
Expand All
DiStella
10/15/25 3:34am

I personally drive a Hyundai Elantra, and the push-button start system is incredibly cool, but the keyhole is indeed quite hidden. It's located under the steering column, near the corner of the center console, covered by a small, dusty panel. Just give it a gentle push or pry it open, and you'll see the keyhole. When I first got the car, it took me a while to find it, but after a few tries, I got used to the location. This feature mainly serves as a backup—useful when the key fob battery dies or there's signal interference. Just insert the key and turn it. I recommend keeping some spare key fob batteries in your car, so you don’t have to worry about remembering its location. It’s especially important to familiarize yourself with it before driving at night or in rainy weather—it can save you a lot of time. In short, don’t find it troublesome; try it a few times, and you’ll remember it for good.

Was this review help?
6
5
Share
Expand All
StBrandon
11/28/25 4:25am

I often come across this type of vehicle. The Hyundai Elantra's push-to-start keyhole is typically located at the bottom of the steering wheel, protected by a cover. In emergencies, you can open it to insert the key and start the engine, which is a design to prevent smart key failure. The cover might require some force to pry open, but avoid using hard objects to prevent scratches. It's recommended that owners regularly check if the cover is loose. If you can't locate it, simply use a flashlight to find it when parked. Although the keyhole isn't frequently used, paying attention to it during maintenance can extend its lifespan. In short, being aware of its existence can enhance your sense of security while using the car.

Was this review help?
4
5
Share
Expand All
More Forum Discussions

What causes the door lock of Buick Excelle to jump up and down?

Buick Excelle door lock jumping up and down may be caused by poor lock block actuator or poor line contact. In this case, it is necessary to go to the 4S store for repair or replacement. Composition of central locking system: The full name is central control door lock, which is a car accessory. When using this lock, you can remotely open and lock the door without inserting the key into the keyhole. It consists of a door lock switch, an actuator and a controller. Function of central locking system: It refers to a control device set on the switch of the driver's door, which can simultaneously control the closing and opening of all car doors. Generally, after starting to drive, stepping on the first brake will automatically lock the central lock to prevent people in the car from opening the door by mistake and falling. Many cars now have this design, especially family cars.
2
0
Share

Can a Car with Over-Rich Mixture Still Run?

A car with an over-rich mixture can still run. At idle, the engine load decreases, the throttle opening becomes smaller, and the air intake reduces. Causes of an over-rich mixture: Excessively high fuel level; Malfunctioning vacuum economizer; Clogged main air jet; Blocked air filter. The car's mixture is a combination of fuel and air, typically referring to the mixture of gasoline, diesel, and air. Solutions for an over-rich mixture: Check if the fuel level in the float chamber is too high. If the fuel level is normal, inspect whether the choke is open and if the air filter is dirty or blocked. If the fuel level is too high, adjust it. If the fuel level cannot be adjusted to the normal height, check if the needle valve is sealed and if the float is cracked.
15
5
Share

Where is the ignition switch of Audi A4L?

Audi A4L ignition switch is located on the left side of the gear lever. For low-end models, insert the key near the steering wheel, while for high-end models, insert the key near the steering wheel or press the ignition switch directly near the gear lever. Traditional ignition: The working process of the mechanical ignition system is driven by the crankshaft to rotate the distributor shaft, and the cam on the distributor shaft rotates, causing the primary contacts of the ignition coil to connect and disconnect, thereby generating high voltage. Electronic ignition: A series of sensors such as engine speed sensor, intake manifold vacuum sensor (engine load sensor), throttle position sensor, and crankshaft position sensor are used to determine the working state of the engine. The required ignition advance angle under this working state is calculated, and ignition is performed accordingly.
14
0
Share

What are the differences between manual replacement and machine replacement?

Manual replacement is not as thorough as machine replacement. With manual replacement, there may be residual old oil inside, while machine replacement involves a circulating exchange, resulting in a cleaner change. However, machine replacement requires significantly more oil than manual replacement. Below is some relevant information about transmission fluid: Functions: Transmission fluid serves to clean, lubricate, prevent rust, and dissipate heat. Regularly changing the transmission fluid can clean and lubricate the gear system, extend the lifespan of the transmission components, ensure the transmission operates normally, and make gear shifts smoother and more seamless—perhaps even restoring that new-car feeling. Precautions: If the transmission fluid is not changed for a long time, it can not only affect performance but also cause the fluid's properties to degrade, reducing its lubricating effectiveness. This can accelerate wear on transmission components and increase the likelihood of malfunctions.
14
5
Share

What Does 300cc Displacement Mean?

300cc displacement refers to the engine combustion chamber displacement of a motorcycle being 300 milliliters. Here is the relevant introduction: Calculation method: The calculation method for motorcycle displacement: Cylinder cross-sectional area X stroke X number of cylinders = total displacement in cc. Among these, stroke refers to the piston's reciprocating motion within the cylinder. When the piston moves from the top dead center to the bottom dead center, the distance traveled is called the piston stroke, abbreviated as stroke or travel. The relationship between the three: The larger the displacement, the higher the fuel consumption and the greater the horsepower. The smaller the displacement, the lower the fuel consumption and the smaller the horsepower. 1cc = 1 milliliter, where milliliter is a unit of volume, with the main unit of volume being (L). 1 milliliter = 1 cubic centimeter, and 1000 milliliters = 1 liter. 100CC refers to the displacement of a motorcycle, and a 125 motorcycle is a vehicle with a displacement of 125CC.
7
1
Share

Can car maintenance be done outside of 4S stores?

Car maintenance can indeed be performed outside of 4S stores. However, it is crucial to have the service done at a qualified and reputable facility, and to ensure that all replaced parts are safe and reliable, as this serves as evidence for potential warranty claims. Regulations on Motor Vehicle Maintenance: These regulations explicitly state that manufacturers and 4S stores cannot refuse warranty services solely because maintenance was not performed at an authorized dealership. In other words, car owners have the freedom to choose their preferred service provider. Except for automakers fulfilling defective vehicle recalls or "three guarantees" (repair, replacement, return) obligations, no entity or individual may force or covertly compel car owners to use specific maintenance providers. Maintenance Considerations: If maintenance is conducted at a legitimate, certified repair shop with proper invoices issued, it becomes difficult for 4S stores to later deny warranty coverage using "lack of authorized maintenance" as an excuse when vehicle malfunctions occur.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.