Where is the keyhole for the Envision?

3 Answers
StHeidi
07/24/25 11:10am
The keyhole for the Envision is located at the rear end of the driver's side door handle, which is a hidden keyhole. The Envision is a mid-size SUV produced by SAIC-GM Buick, with body dimensions of 4686mm in length, 1839mm in width, and 1691mm in height. The Envision offers a choice between a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. The 1.5-liter version is equipped with a 7-speed dual-clutch transmission across all models, while the 2.0-liter version comes with a 9-speed automatic transmission. In terms of exterior design, the Envision features a new wing-shaped chrome trim that runs through the LED wing-shaped headlights, widening the horizontal visual effect. The dynamic bumper surfaces and three-dimensional silver lower guard plate create a full and powerful front end.
Was this review help?
19
2
Share
DakotaFitz
08/11/25 2:38am
In the past, finding the ignition keyhole while driving always required some fumbling. For the Envision, if you're referring to the ignition keyhole, it's typically located below the steering wheel or near the center console, close to the driver's seat, where you insert the key to start the car. However, many newer models now come with keyless ignition, where you just need to have the key nearby and press a button to start. If you're referring to the door lock keyhole instead of the ignition, it's usually hidden behind a cover beneath the exterior door handle—just pry it open gently to access it, serving as a backup in case the remote battery dies. I remember a friend once couldn't find the keyhole in a similar situation. When buying a car, it’s helpful to read the manual or exchange tips on forums, as designs vary by model—don’t assume there’s no keyhole at all.
Was this review help?
16
2
Share
Expand All
VonBeckett
09/25/25 4:13am
Speaking of this, I often tinker with car modifications. The keyhole position of the Envision is mostly designed in a hidden spot above the door handle. For example, there's a small cover on the outside of the driver's door—just open it to insert the key and unlock the door. This is related to modern keyless technology, where the keyhole mainly serves as a backup safety measure. If your key runs out of battery or the remote fails, don't panic—just look for that hole. To prevent power leakage, manufacturers may also design the ignition hole near the transmission to ensure a safe start. Regular maintenance checks on wiring and batteries can help avoid these issues.
Was this review help?
3
5
Share
Expand All
More Forum Discussions

How many kilometers does the Atenza need for maintenance?

Atenza maintenance is recommended every two years or 40,000 kilometers, and can be adjusted based on actual conditions. Here is a partial introduction about car maintenance: 1. Introduction: Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. 2. Maintenance content: Modern car maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, and other maintenance scopes.
2
3
Share

What are the symptoms of a faulty clutch switch in an old Jetta?

Clutch failure prevents gear engagement, initially accompanied by grinding sounds, and difficulty in shifting gears or disengaging. Below is more information about the clutch switch: Introduction: The clutch switch is a normally closed switch that provides a 12-volt signal to the engine control unit. When the clutch is depressed, the switch opens, and the engine control unit no longer receives the clutch signal, indicating the need to disconnect the engine. This reduces ignition advance angle and fuel injection, storing power to avoid gear shift shock. Function: When the driver turns or shifts gears, the engine appropriately reduces its speed to ensure smooth gearbox shifting without shock. The timing of this engine speed reduction is determined by the signal from the clutch switch when the driver depresses the clutch pedal.
9
5
Share

What is the function of a pressure relief valve?

Automotive pressure relief valves serve to protect the engine and turbocharger. Below is relevant information about automotive pressure relief valves: 1. Definition: Also known as a safety valve, it automatically opens and closes based on the system's working pressure, typically installed on equipment or pipelines of closed systems to ensure system safety. When the pressure inside the equipment or pipeline exceeds the set pressure of the relief valve, it automatically opens to relieve pressure, ensuring that the medium pressure within the equipment and pipeline remains below the set level, thereby protecting the equipment and pipeline and preventing accidents. 2. Classification: Pressure relief valves mainly fall into two structural categories: spring-type and lever-type.
19
1
Share

What is the curb weight of the Lexus RX300?

Lexus RX300 has a curb weight of 2380kg. The following is an introduction to the Lexus RX300: Body dimensions: The length of the Lexus RX300 is 4890mm, the width is 1895mm, the height is 1710mm, and the wheelbase is 2790mm. Exterior: The new RX300 features a sleek and streamlined design with a strong sense of dynamic beauty. The vehicle is equipped with high-intensity headlights with automatic adjustment, integrating high beam, low beam, and turn signals into one unit, seamlessly blending with the strong and simple front end. The integrated taillights use elegant crystal-clear lamp covers and light-emitting diodes (LEDs), with a design inspired by a layered three-dimensional concept, perfectly integrating with the rear of the vehicle, showcasing a rare harmony.
8
0
Share

How to reset the maintenance light on the 2019 Corolla?

First, start the vehicle, then press the mute button on the multifunction steering wheel to select the audio source, set the display information on the vehicle dashboard, and then press the DISP button on the right side of the multifunction steering wheel to eliminate the vehicle's maintenance light. After that, restart the vehicle. Below are related introductions: 1. Meaning of the maintenance light: When the maintenance light of the vehicle comes on, it indicates that the vehicle has reached the required maintenance cycle. 2. Method to clear the maintenance light: Drive the vehicle to a local dealership or repair shop for maintenance. After maintenance, the technician will clear the maintenance indicator light. If the vehicle owner does not wish to perform maintenance in the near future, they can note the mileage and wait until the mileage limit is reached to perform maintenance on the vehicle.
4
1
Share

What Causes Automatic Transmission Gear Failure?

Automatic transmission gear failure may be caused by the following reasons: Issues with the automatic transmission: Internal components of the automatic transmission may be faulty, requiring repair of the gear lever assembly. During gear shifts at low speeds, the clutch must fully disengage to smoothly engage the corresponding gear. Faulty solenoid valve or brake control: If the solenoid valve in the automatic transmission fails or the brake controller malfunctions, the solenoid valve needs to be replaced. Do not force the gear lever if it cannot be moved. Low vehicle temperature: Insufficient lubrication of the transmission fluid can cause gear failure. If the transmission makes a gear grinding noise when attempting to engage reverse gear while stationary, it indicates incomplete clutch disengagement. The issue can be resolved after repairing the clutch.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.